Instrukcja obsługi Fluke 771

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke 771 (22 stron) w kategorii Multimeter. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/22
771
Milliamp Process Clamp Meter
Calibration Manual
November 2007 Rev. 2, 7/19
© 2007-2019 Fluke Corporation. All rights reserved. Product specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for 3 years (one year for cable and
clamp) from the date of purchase. This warranty does not cover fuses, disposable batteries or damage from
accident, neglect, misuse or abnormal conditions of operation or handling. Resellers are not authorized to
extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, send your
defective Meter to the nearest Fluke Authorized Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A
PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE
OR THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty
or of incidental or consequential damages, this limitation of liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
ООО «Флюк СИАЙЭС»
125167, г. Москва,
Ленинградский проспект дом 37,
корпус 9, подъезд 4, 1 этаж
11/99
i
Table of Contents
Title Page
Introduction ........................................................................................................ 1
Contacting Fluke ................................................................................................ 2
Safety Information .............................................................................................. 2
Symbols ............................................................................................................. 3
Specifications ..................................................................................................... 4
Getting Acquainted with the Meter ..................................................................... 5
Maintenance ....................................................................................................... 7
Cleaning the Meter ........................................................................................ 7
Battery Replacement ..................................................................................... 7
Performance Tests ............................................................................................. 9
Required Equipment ...................................................................................... 9
Testing the Batteries ...................................................................................... 9
Testing the Display ........................................................................................ 10
Display Hold Test ........................................................................................... 10
Backlight Test ................................................................................................ 10
Spotlight LED Test ......................................................................................... 10
Zero Test ....................................................................................................... 10
Accuracy Tests .............................................................................................. 11
Calibration Adjustment ....................................................................................... 12
Adjustment Subroutines ................................................................................. 12
Front Panel Operation for Adjustment ........................................................... 12
Calibration Error Messages ........................................................................... 13
Calibration Adjustment Procedure ................................................................. 13
Temperature Adjustment Procedure ............................................................. 14
Low Range Adjustment Procedure ................................................................ 14
High Range Adjustment Procedure ............................................................... 14
Phase Adjustment Procedure ........................................................................ 15
User Replaceable Parts ..................................................................................... 16

Specyfikacje produktu

Marka: Fluke
Kategoria: Multimeter
Model: 771

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fluke 771, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Multimeter Fluke

Fluke

Fluke 73 Instrukcja

30 Sierpnia 2024
Fluke

Fluke 175 Instrukcja

28 Sierpnia 2024
Fluke

Fluke 279 FC Instrukcja

24 Sierpnia 2024
Fluke

Fluke 28 II Ex Instrukcja

22 Sierpnia 2024
Fluke

Fluke 87V Instrukcja

22 Sierpnia 2024
Fluke

Fluke 289 Instrukcja

20 Sierpnia 2024
Fluke

Fluke a3001 FC Instrukcja

9 Sierpnia 2024
Fluke

Fluke 772 Instrukcja

8 Sierpnia 2024
Fluke

Fluke 177 Instrukcja

7 Sierpnia 2024
Fluke

Fluke T150 Instrukcja

5 Lipca 2024

Instrukcje Multimeter

Najnowsze instrukcje dla Multimeter