Instrukcja obsługi Fluke 393 FC

Fluke Sprzęt pomiarowy 393 FC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke 393 FC (32 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
393/393 FC
CAT III 1500V TRMS Clamp Meter
Calibration Manual
February 2022
© 2022 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and
service. The warranty period is three years and begins on the date of shipment. Parts, product repairs, and
services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a
Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's
opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of
operation or handling. Fluke warrants that software will operate ce with its functional substantially in accordan
specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant
that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but
have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if
product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price.
Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased
in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or
replacement of a defective product which is returned to a Fluke authorized service center within the warranty
period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization
information, then send the product to that service center, with a description of the difficulty, postage and insurance
prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will
be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by
neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including
overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical
components, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work.
Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the
repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF
DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation
of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every
buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of
competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
11/99
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
i
Table of Contents
Page
Introduction ............................................................................................... 1
Contact Fluke ............................................................................................ 1
Safety ........................................................................................................ 1
Static Awareness ...................................................................................... 2
Specifications ............................................................................................ 3
Performance Tests.................................................................................... 3
AC Voltage ......................................................................................... 4
DC Voltage (0 V to 600 V) .................................................................. 4
DC High Voltage (600 V to 1500 V).................................................... 4
Two Calibrators Method............................................................... 4
High Voltage DC Power Supply Method ...................................... 5
mV DC Voltage ............................................. ............................. ......... 6
Resistance/Capacitance ..................................................................... 6
DC Current, AC Current, and iFlex Verification .................................. 7
DC Current (Jaw with Amplifier and 25-Turn Coil) ....................... 7
AC Current (Jaw with Amplifier and 25-Turn Coil) ....................... 8
AC Current (iFlex Current Probe with Simulation) ....................... 8
AC Current (iFlex Current Probe with Amplifier and
25-Turn Coil or 50-Turn Coil) ....................................................... 10
Calibration Adjustment .............................................................................. 14
Adjustment Setup ......................................... ............................. ......... 14
V AC Adjustment Procedure................ .............. 17.................................
V DC/mV DC Adjustment Procedure .................................................. 18
V DC Adjustment Procedure............................................................... 18
mV DC Adjustment Procedure............................................................ 19
Resistance/Capacitance Adjustment Procedure ................................ 19
Resistance Adjustment Procedure ..................................................... 20
Capacitance Adjustment Procedure ................................................... 21
A DC Adjustment Procedure............................................................... 21
A AC Jaw/iFlex Adjustment Procedure............................................... 22
A AC Jaw Adjustment Procedure ....................................................... 23
A AC iFlex Adjustment Procedure ...................................................... 24

Specyfikacje produktu

Marka: Fluke
Kategoria: Sprzęt pomiarowy
Model: 393 FC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fluke 393 FC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy Fluke

Fluke

Fluke 319 Instrukcja

24 Września 2024
Fluke

Fluke T150/VDE Instrukcja

23 Września 2024
Fluke

Fluke i400 Instrukcja

15 Września 2024
Fluke

Fluke 301D Instrukcja

15 Września 2024
Fluke

Fluke 355 True RMS 2000 Instrukcja

29 Sierpnia 2024
Fluke

Fluke 345 Instrukcja

26 Sierpnia 2024
Fluke

Fluke 707Ex Instrukcja

23 Sierpnia 2024
Fluke

Fluke 301C Instrukcja

23 Sierpnia 2024
Fluke

Fluke 393 FC Instrukcja

23 Sierpnia 2024
Fluke

Fluke i30 Instrukcja

22 Sierpnia 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Stamos

Stamos S-LS-28 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-86 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-61 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-81 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-84 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-74 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-76 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-42 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-75 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-35 Instrukcja

15 Października 2024