Instrukcja obsługi Fluke 3001 FC

Fluke multimetr 3001 FC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke 3001 FC (30 stron) w kategorii multimetr. Ta instrukcja była pomocna dla 31 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/30

July 2014

All product names are trademarks of their respective companies.

3000 FC

Wireless Multimeter

Calibration Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship under normal use and

service. The warranty period is three years and begins on the date of shipment. Parts, product repairs, and

services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of

a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in

Fluke's opinion, has been misused, al damaged by accident or abnormal tered, neglected, contaminated, or

conditions of operation or handling. Fluke warrants that software will operate substantially in accordance

with its functional specifications for 90 days and that it has been properly recorded on non-defective media.

Fluke does not warrant that software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers

only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is

available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the

applicable international price. Fluke reserves the right to invoice Buyer for importation costs of

repair/replacement parts when product purchased in one country is submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair,

or replacement of a defective product which is returned to a Fluke authorized service center within the

warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center to obtain return

authorization information, then send the product to that service center, with a description of the difficulty,

postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following

warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke

determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal

condition of operation or handling, including overvoltage failures caused by use outside the product’s

specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair

costs and obtain authorization before commencing the work. Following repair, the product will be returned to

the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges

(FOB Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE

FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,

INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or

limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not

apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other

decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other

provision.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

Table of Contents

Title Page

Introduction ........................................................................................................ 1

Contact Fluke ..................................................................................................... 1

Safety Information .............................................................................................. 2

Symbols ......................................................................................................... 4

Hazardous Voltage ........................................................................................ 4

Test Lead Alert .............................................................................................. 4

Specifications ..................................................................................................... 5

AC Voltage ..................................................................................................... 6

DC Voltage, Continuity, Resistance, Diode Test, and Capacitance .............. 6

AC and DC Current ........................................................................................ 6

Frequency ...................................................................................................... 7

Frequency Counter Sensitivity ....................................................................... 7

Input Characteristics ...................................................................................... 7

MIN MAX Recording ...................................................................................... 7

Required Equipment .......................................................................................... 8

Performance Tests ............................................................................................. 9

Display Test ................................................................................................... 9

Backlight Test ................................................................................................ 9

Keypad Test ................................................................................................... 9

Fuse Test ....................................................................................................... 10

Function Performance Tests ......................................................................... 11

Before Calibration Adjustment ........................................................................... 14

Enter the Password ....................................................................................... 14

Change the Password ................................................................................... 14

Restore the Default Password ....................................................................... 15

Calibration Adjustment ....................................................................................... 16

Maintenance ....................................................................................................... 18

User-Replaceable Parts ..................................................................................... 20

Specyfikacje produktu

Marka:	Fluke
Kategoria:	multimetr
Model:	3001 FC
Kolor produktu:	Black, Orange
Typ produktu:	Multimetr cyfrowy
Źródło zasilania:	Bateria
Wysokość produktu:	160 mm
Szerokość produktu:	66 mm
Głębokość produktu:	38 mm
Waga produktu:	255 g
Technologia baterii:	Alkaliczny
Typ ekranu:	LCD
Przeznaczenie:	Multimetr ręczny
Zakres temperatur (eksploatacja):	-10 - 50 °C
Zakres wilgotności względnej:	0 - 90 %
Rodzaj baterii:	AA
Zakres temperatur (przechowywanie):	-40 - 60 °C
Liczba baterii:	2
Dopuszczalna wysokość podczas eksploatacji (n.p.m.):	0 - 2000 m
Wyświetl cyfry:	3.5 cyfr(y)
Zakres napięcia DC:	6 - 1000 V
Dokładność (napięcie DC):	0.15% + 2
Kategoria pomiarowa:	CAT III 1000V, CAT IV 600V
Rozdzielczość (napięcie DC):	100 mV
Maksymalna wysokość przechowywania:	12000 m