Instrukcja obsługi First Alert 2072F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla First Alert 2072F (5 stron) w kategorii Kluis. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
2025F / 2072F / 2073F
Manual # M08-0266-004
Manual # M08-0266-004
www.FirstAlert.com
DIGITAL ANTITHEFT SAFE
Operation & Installation Guide
12
Index / Overview of Your Safe Overview of Your Safe
Index
Overview of Your Safe .................................................................................................1
Initial Set Up .................................................................................................................3
Programming a Personal Passcode ..........................................................................3
Shelf and Mounting ....................................................................................................4
Use, Care and Maintenance .......................................................................................5
Consumer Aairs .........................................................................................................5
Limited Warranty ......................................................................................................... 8
For Your ProtectIon
a Do not remove the serial number tag from the safe.
a Store emergency override keys away from safe, NEVER INSIDE.
a Record all safe identication numbers on Safe Identication Record (page 7).
a Save this manual and NEVER keep it inside the safe.
oVerVIeW oF Your SAFe
Congratulations!
Your new First Alert® Anti-Theft Safe™ will provide secure protection for your
valuables, important documents and other personal items. All First Alert® safes
are designed and built using the highest manufacturing standards to ensure
maximum user satisfaction under a variety of conditions. With proper care,
your First Alert® safe will provide peace of mind for many years to come.
PACKAGE CONTENTS
YOU WILL NEED
1 Small Phillips
Head Screwdriver
2 Knob Keys
1 Socket Wrench 1 Drill with
5/16 in. Bit
1 Emergency
Override Key
1 Pencil
1 Adjustable Shelf
(2072F Only)
4 Mounting Screws 4 AA Alkaline Batteries
ImPortAnt: do not return SAFe to Store
If you are missing parts, have diculty programming your safe or have any other
questions pertaining to its proper use and care, DO NOT RETURN your safe to the
store. Please contact Consumer Aairs at 1-800-323-9005, 7:30 a.m. – 5 p.m.
Central Standard Time, Monday through Friday. To assist us in serving you, please
have the model number and date of purchase available when calling.
AA
AA
AA
AA
+-
+-
+-
+-
34
InItIAl SetuP
EMERGENCY OVERRIDE KEY USE
Insert emergency override key into
the lock, turn it counterclockwise
and pull the door open.
BATTERY INSTALL
1 Remove battery cover.
2 Install four (4) AA batteries. Make sure to
install them facing the proper direction.
3 Replace the battery cover.
4 When installed correctly, a yellow light
will ash on the digital keypad.
ProgrAmmIng A PerSonAl PASScode
1 Open the safe door.
2 Press the reset button located on the left side of the
battery compartment. (The lock will beep two times
and the yellow light will blink two times).
3 Enter your new three to eight (3-8) digit passcode
followed by ‘A’ or ‘B. (The lock will beep two times and
the yellow light will blink two times).
NOTE: After pressing the reset button, your passcode must
be programmed within 10 seconds, or it will not be accepted.
LOCKOUT PENALTY:
Green light means correct passcode has been entered. Rapid beeping yellow light
means incorrect passcode has been entered. Entering incorrect passcode three (3)
times will result in lock-out.
IF LOCK-OUT OCCURS:
1 Wait 15 minutes before entering your (3-8) digit passcode.
2 Check to see if the batteries have been installed properly and replace if
necessary.
3 Contact Consumer Aairs at 1-800-323-9005.
3
2
1
6
5
4
9
8
7
B
0
A
Initial Setup Shelf and Mounting
FORGOTTEN PASSCODE
1 Insert override key, turn counterclockwise and pull the door open.
2 Follow instructions on Pg. 3 ‘PROGRAMMING A PERSONAL PASSCODE’ to reset
your passcode.
OPENING SAFE
1 Insert knob key.
2 Enter your three to eight (3-8) digit passcode
followed by ‘A’ or ‘B.
3 Turn the key clockwise and pull the door open.
CLOSING SAFE
1 Push door closed.
2 Turn knob key counterclockwise fully into locked position.
ImPortAnt Turn the light switch o before closing the safe. Leaving the
light switch on will result in loss of battery power.
ShelF And mountIng
INSTALLING THE SHELF 2072F ONLY
Slide shelf into place on top of shelf racks.
MOUNTING INSTRUCTIONS
1 Remove rubber feet and mounting screws
from safe with Phillip’s head screwdriver.
2 Place your safe where you want it to be mounted. Safe weighs
(36.1 lbs - 2072F; 19.8 lbs. – 2073F; 13.2 lbs. – 2025F) when empty so
be sure that if you’re mounting on a shelf that it will support the weight.
3 Open your safe.
4 Remove the bottom carpet and nd the screw holes.
Mark the safe’s placement through the holes with a pencil.
5 Drill holes in the shelf.
6 Place screws through holes in shelf and rubber feet.
7 Place safe on shelf over the screws and rubber feet. Use a socket wrench
to tighten safe into place.
3
2
1
6
5
4
9
8
7
B
0
A
AA
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
3
2
1
6
5
4
9
8
7
B
0
A
Beep
3
2
1
6
5
4
9
8
7
B
0
A
Beep
AA
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA
+-
AA +
AA
+-
AA
+-
AA
+-
AA
+-
3
2
1
6
5
4
9
8
7
B
0
A
3
2
1
6
5
4
9
8
7
B
0
A
1
2
3 4
AA +
AA
+-
AA
+-
AA
+-
AA
+-
15
6
7
4
4
1

Specyfikacje produktu

Marka: First Alert
Kategoria: Kluis
Model: 2072F

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z First Alert 2072F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kluis First Alert

Instrukcje Kluis

Najnowsze instrukcje dla Kluis