Instrukcja obsługi Fibaro FGBHS-213


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fibaro FGBHS-213 (13 stron) w kategorii inteligentny dom. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/13
CONTENTS
#1: Description and features 3
#2: Supported loads 4
#3: Installation 5
#4: Pairing the accessory 7
#5: Reset 8
#6: Functionality 9
#7: Congurable parameters 11
#8: Specications 12
#9: Regulations 13
O P E R A T I N G
M A N U A L
EN
FIBARO
SINGLE SWITCH
FGBHS-213
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
!
Danger of electrocution!
FIBARO Single Switch is designed to operate in electrical home
installation. Faulty connection or use may result in re or electric
shock.
All works on the device may be performed only by a qualied and
licensed electrician. Observe national regulations.
Even when the device is turned o, voltage may be present at its ter-
minals. Any maintenance introducing changes into the conguration
of connections or the load must be always performed with disabled
fuse
Required overcurrent protection
FIBARO Single Switch must be protected with an overcurrent
protection (fuse) with a value not higher than 10A.
!
HomeKit technology
Apple HomeKit technology provides an easy, secure way to control
HomeKit-enabled accessories using Siri on your iPhone, iPad, or iPod
touch.
After installing your FIBARO Single Switch, congure it from a
compatible app with just a few simple steps.
You can even create your own custom scenes to control your home
settings. For example, you can create a scene to automatically turn
o the lights, lock your doors, close the garage door, and set the
thermostat to the desired temperature in just one step.
To control this HomeKit-enabled accessory, iOS 9.3 or later is re-
commended.
Controlling this HomeKit-enabled accessory automatically and
away from home requires an Apple TV with tvOS 9.2 or later or
an iPad with iOS 9.3 or later set up as a home hub.
i
3
DESCRIPTION AND FEATURES
Main features of FIBARO Single Switch:
Compatible with Apple HomeKit technology,
Bluetooth® low energy technology for wireless communication,
Advanced microprocessor control,
Works with various types of switches momentary, toggle,
three-way, etc,
To be installed in wall switch boxes of dimensions allowing for
installation, conforming to provisions of applicable regulations,
FIBARO Single Switch is an extension unit.
FIBARO Single Switch is designed to be installed in standard wall
switch boxes or anywhere else where it is necessary to control electric
devices.
FIBARO Single Switch allows to control connected devices either via
HomeKit technology (using ® low energy) or via a switch Bluetooth
connected directly to it and is equipped with active power and energy
consumption metering functionality.
#1: Description and features


Specyfikacje produktu

Marka: Fibaro
Kategoria: inteligentny dom
Model: FGBHS-213

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fibaro FGBHS-213, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje inteligentny dom Fibaro

Instrukcje inteligentny dom

Najnowsze instrukcje dla inteligentny dom