Instrukcja obsługi Ferroli F30


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ferroli F30 (48 stron) w kategorii kocioł centralnego ogrzewania. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/48
Appr. nr. B99.06 A - CE 0461 BM 0607
FERROLI F30
gas combination boiler for central heating
and hot water production, wall mounted,
copper heat exchanger, fan assisted, room sealed,
electronic fl ame Ignition and control
INSTALLATION, SERVICING AND USER INSTRUCTIONS
cod. 3544016/2 - 05/2005
G.C. NO: 47-267-32
Ferroli F 30
2
CE MARK
CE mark documents that the Ferroli gas appliances comply with the requirement contained in
European directives applicable to them.
In particular, the appliances comply with the following CEE directives and the technical specifications
provided from them:
Gas appliances directive 90/396
Efficiencies directive 92/42
Low tension directive 73/23 (modified from the 93/68)
Electromagnetic compatibility directive 89/396 (modified from the 93/68)
IMPORTANT
Your "benchmark" Installation, Commissioning and Service Record Log Book is enclosed in the last
pages of this manual. “This record must be completed and left with the end user.
"All CORGI Registered Installers carry a CORGI ID card and have a registration number. Both should
be recorded in your central heating log book. You can check the installer's CORGI registration by
calling CORGI on 01256 372300".
Ferroli is a member of the Benchmark initiative and fully supports the aims of the programme. Benchmark
has been introduced to improve the standards of installation and commissioning of central heating
systems in the UK and to encourage the regular servicing of all central heating systems to ensure safety
and efficiency. Please see installation and servicing guidelines.
INDEX
1. DESCRIPTION........................................................................................................................................ 3
2. TECHNICAL AND DIMENSIONAL CHARACTERISTICS....................................................................... 4
3. INSTALLATION DETAILS ...................................................................................................................... 9
4. COMMISSIONING AND TESTING...................................................................................................... 24
5. ADJUSTMENT AND GAS CONVERSION........................................................................................... 25
6. MAINTENANCE AND CLEANING ..................................................................................................... 27
7. REPLACEMENT OF PARTS ................................................................................................................. 29
8. FAULT FINDING.................................................................................................................................. 34
9. ELECTRICAL AND FUNCTIONAL SCHEME ....................................................................................... 41
10. USER INSTRUCTIONS ....................................................................................................................... 43
BENCHMARK........................................................................................................................................... 46
Ferroli F 30
3
1. DESCRIPTION
1.01 Introduction
The Ferroli F30 is defined as a “room sealed” combination boiler, all air required for combustion is taken from
outside the room in which it is installed. It is a new high performance gas fired heat generator for central heating and
domestic hot water production. A special feature of this boiler is its built-in electronic flame ignition and control unit
making burner operation completely automatic and safe. The main components are as follows:
Copper heat exchanger consisting of three finned tubes specifically shaped for high efficiency.
There are three copper coils inserted in the three heating circuit tubes. These represent the domestic hot water heat
exchanger. Their shape and high exchange surface area enable the full output of the boiler to be absorbed.
Ceramic fibre insulated combustion chamber
16 stainless steel bladed burners specifically designed for this boiler.
Fan for discharge of combustion products and intake of combustion air.
Differential air pressure switch. For safety reasons, this ensures the burner ignites only when the fan
is functioning correctly.
Hermetically sealed compartment made from corrosion-resistant steel enclosing the above components.
Combination gas safety valve with modulator, complete with pressure stabiliser.
Flowmeter giving the domestic hot water circuit precedence over the central heating circuit.
Pressure relief valve for the central heating circuit set to open at 3 bar.
Built-in Expansion vessel.
Variable speed pump.
Central heating flow temperature adjustment thermostat.
Domestic hot water flow temperature adjustment thermostat.
Central heating limit thermostat.
Overheat safety thermostat.
Electronic control unit for automatic flame ignition and control.
Central heating low water pressure cut off switch.
Domestic hot water flow temperature sensor.
Central heating flow temperature sensor.
Safety bracket
1.02 Instructions and regulations
Assembly, installation, first start up and maintenance must be carried out by competent persons only, in accordance
with all current technical regulations and directives.
C.O.S.H.H.
Materials used in the manufacture of this appliance are non hazardous and no special precautions are
required when servicing.
Related Documents
This appliance must be installed strictly in accordance with these instructions.
The Gas Safety Regulations (Installations & Use) 1996.
The Local Building Regulations.
The Building Regulations.
The Buildings Standards (Scotland - Consolidated) Regulations.
British Standards Codes of Practice:
B.S. 7593 1992 TREATMENT OF WATER IN DOMESTIC HOT WATER CENTRAL HEATING SYSTEMS
B.S. 5546 1990 INSTALLATION OF HOT WATER SUPPLIES FOR DOMESTIC PURPOSES
B.S. 5440 Part 1 2000 FLUES
B.S. 5440 Part 2 1989 AIR SUPPLY
B.S. 5449 1990 FORCED CIRCULATION HOT WATER SYSTEMS
B.S. 6798 1987 INSTALLATION OF GAS FIRED HOT WATER BOILERS
B.S. 6891 1989 GAS INSTALLATIONS
B.S. 7671 1992 IEE WIRING REGULATIONS
B.S. 4814 1990 SPECIFICATION FOR EXPANSION VESSELS
B.S. 5482 1994 INSTALLATION OF LPG
Model Water Bye Laws
For Northern Ireland the rules in force apply


Specyfikacje produktu

Marka: Ferroli
Kategoria: kocioł centralnego ogrzewania
Model: F30

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ferroli F30, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kocioł centralnego ogrzewania Ferroli

Instrukcje kocioł centralnego ogrzewania

Najnowsze instrukcje dla kocioł centralnego ogrzewania