Instrukcja obsługi Fenton SPB-26

Fenton głośnik SPB-26

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fenton SPB-26 (16 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Congratulations on the purchase of this SkyTec Karaoke set.

Please read this manual carefully prior to using the unit.

Warning:

- Read the manual prior to using the unit.

- Keep the manual for future reference.

- Keep the packaging for safer transport in its original packaging

- Prior to the first use, have the unit checked by a qualified person.

- The unit contains voltage carrying parts. DO NOT open the unit.

- When you unplug the unit from the mains always pull the plug, never the lead.

- Never plug or unplug the unit with wet hands.

- If the plug and/or mains lead are damaged, they need to be repaired by a qualified

technician.

- If the unit is damaged to an extent that you can see internal parts, do not plug the unit

into a mains outlet.

- Repairs have to be carried out by a qualified technician.

- Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.

- Do no place the unit near heat sources.

- Always unplug the unit during a thunderstorm or when it is not in use.

- If the unit has not been used for a longer period of time, condensation can occur inside

the housing. Please let the unit reach room temperature prior to use.

- To avoid accidents in public premises, the legal requirements must be fulfilled and

instructions/warnings must be adhered to.

- Keep out of the reach of children.

- All volume controls must be set to zero prior to switching the unit on.

- Do not use cleaning sprays for the slider controls. The residues of these spray cause

dust deposits in the controls. If a problem occurs, please consult a specialist.

- Do not clean the unit with chemical solutions. This might damage the finish. Only use a

dry cloth for cleaning.

PARTS DESCRIPTION

Thanks you for choosing our products.

Please take a few moments to read these instructions carefully, as we want you to enjoy your

new products quickly and to the full. The series of amplifier with new design of model and nice

looking, can suit different occasions, especially for oce, meeting, exhibition, outside party,

teaching etc. The series is provided with wired, amplifying and amusement; fully embody high

quality, low price, portability and convenience. We believe firmly that the series of amplifier will

become your good assistant and friend because of its advantages.

MAIN FEATURES

 USB, Card reader support play form: MP3, WMA

SPECIFICATION

Frequency Response: ...................................................... 40Hz-20kHz ± 3dB

Input Sound Source: ...................................................................... Line Input

Speaker: ................................. 8 inch Woofer & 2x Piezo Tweeter (178.438)

.............................................. 10 inch Woofer & 2x Piezo Tweeter (178.440)

............................................... 12 inch Woofer & 3x Piezo Tweeter (178.442)

........................................ 2x 6.5 inch Woofer & 2x Piezo Tweeter (178.444)

........................................... 2x 8 inch Woofer & 2x Piezo Tweeter (178.446)

......................................... 2x 10 inch Woofer & 2x Piezo Tweeter (178.448)

Car reader memory medium: ................................................... USB, SD Card

Power supply: ....................................................................... 230VAC / 50Hz

PANELS:

1. Microphone Input Sockets

2. Microphone volume control

3. Echo control

4. Bass control

5. Treble control

6. Master Volume control

7. MP3 Play/Pause/Track buttons

8. Speaker output

9. Line input

10. Power switch

11. AC power cable

OPERATION:

Connect the passive speaker with a good quality speaker cable to the speaker output connector

(21). WARNING: only connected the original slave speaker on the speaker output terminal!

If required connect an external signal source like a CD-layer to LINE IN.

Connect the device with an electric outlet (230VAC / 50Hz)

It is possible to connect an external antenna to the antenna socket for optimum radio reception.

Specyfikacje produktu

Marka:	Fenton
Kategoria:	głośnik
Model:	SPB-26
Kolor produktu:	Czarny
Rodzaj zasilania:	Prąd przemienny
Wbudowany wyłącznik:	Tak
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	220-240 V
Wysokość produktu:	680 mm
Szerokość produktu:	270 mm
Głębokość produktu:	203 mm
Waga produktu:	6550 g
Technologia łączności:	Przewodowa
Impedancja:	4 Ω
Ilość głośników:	2
Moc wyjściowa (RMS):	300 W
Ilość portów USB:	1
Obsługiwane typy kart pamięci:	SD
Zintegrowany czytnik kart:	Tak
Diody LED:	Tak
Model:	System nagłośnieniowy wolnostojący (PA)
Mikrofon:	Tak
Regulacja głośności:	obrotowy
Zasięg częstotliwości:	55 - 20000 Hz
Ilość przetworników:	4
Głośnik wysokotonowy:	Tak
Głośnik niskotonowy:	Tak
Wzmacniacz:	Wbudowany
Czułość:	122 dB
Ustawienia korektora:	Tak
Regulacja poziomu tonów niskich:	Tak
Regulacja poziomu tonów wysokich:	Tak
Odtwarzacz mp3:	Tak
Typ głośnika:	2-drożny
Uchwyt(y):	Tak
Kółka transportowe:	Nie
Liczba wyrównywaczy pasm:	2
Liczba głośników niskotonowych:	2
Karaoke:	Tak
Średnica głośnika niskotonowego (imperial):	6.5 "