Instrukcja obsługi Fenton RP170


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fenton RP170 (16 stron) w kategorii gramofon. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
RP165 Series Record Player Set
Ref. nr.: 102.151; 102.152; 102.153; 102.154; 102.155
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.2
2
ENGLISH
Congratulations to the purchase of this Fenton produ . Please read this manual thoroughly prior to using the unit in order to ct
benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the fi t time, rs
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfu tion. nc
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
n d to be replaced by a qualified technician. ee
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or di er. mm
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a -16A fuse. 10
- During a thunders rm or if the unit will not be used for a to
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This
shortens the fe time. li
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a special ist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic field. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 mont if hs
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specifications battery. And dispose the damaged battery
environment friendly.
- If the it has fallen, always have it checked by a un
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the coun y is suitable for this unit. tr
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitud to cause a shock hazard. e
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. T y would invalidate the CE certificate and he
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Pl se bring them to a recycling centre. Ask your local authorities or your ea
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCT ION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product returned in the originbe al
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device itched off until it has reached room temperature. sw
OVERVIEW
1. Tone arm Lever
The fixed tonearm can be raised and lowered pressing the raise / lower lever.
2. -arm Sta Tone nd
3. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
4. Autos p Switch ON/OFF to
This switch turns auto stop on or off. When the automatic stop is enabled, the platform will start rotating as soon as the
tone arm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl rec ds or
stop fore the end do not stop when the end is reached. In this case set Auto-stop to OFF. be or
5. Tone arm Clip
This specially designed arm clip secures the tonearm while at rest or when not in use.
6. Cartridge with needle
When the turntable is not in use it is recommendable to place the removable protection cover on the stylus. ,
7. Volume control
Adjust the volume for the speakers.
8. LED Indicator
Indicator lights up when power turned on.
9. Function Mode
Select the BT or phono play function.
10. Platter
Place you record here. r
11. 45RPM Platter
12. DC IN port
Connecting the 12Volt/DC power adaptor.
13. Line output
The sound signal from long-playing record is sent to this line output. Connect this signal to the line input of an such as
an amplifier or a line input of a CD/DVD player.
OPERATION
1. Switch the fu tion mode (9) to PH. Turn on the power switch at the rear of the turntable player. The indicator will nc
become red colou r.
2. Place a record on the turntable platter and select the desired speed (33/45/78RPM) according to the record.
NOTE: when playing a 4 PM record, use the included 45RPM adapter located inside the 5R
accessories bag.
3. Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever
backward to raise the tone-arm and gently move the tone-arm to the desired pos ion over the it
record. The turntable will begin to spin when the arm is moved toward the record. Push the lift
lever forward to lower the tone-arm slowly onto the desired position on the record to begin playing
the record.
NOTE: -The record will begin t spin only when the tone-arm is moved toward the record if the Auto Stop is turned on. o
- If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished (For some
few vinyl records, it will stop when it does not come to the e OR it will not stop when it comes to the end.). If nd
Auto Stop Control is turned OFF, record will NOT stop automatically when finished.
4. Turn the Volume Control Knob to adjust the volume.
CONNECT BT-DEVI CE
1. Switch the function mode (9) to BT. The LED indicator will flash ue colour. in bl
2. Turn on the BT function your mobile phone, tablet or other BT device and search the turntable of
player with its name Fenton recordplayer .
3. After pairing and connection, the LED indicator wil stop flashing. You can play your music from l
your BT-device.
4. Turn the volume control knob to adjust the volume.
Noted: This device does not have a BT transmitter, this means that it is not possible to send sound via BT to, for example, a BT
speaker
When the unit is used as a speaker, function cannot be used at the same time.BT ALL OTHER PLAYBACK S


Specyfikacje produktu

Marka: Fenton
Kategoria: gramofon
Model: RP170

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fenton RP170, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje gramofon Fenton

Fenton

Fenton RP118E Instrukcja

6 Października 2024
Fenton

Fenton 102.155 Instrukcja

24 Września 2024
Fenton

Fenton 102.110 Instrukcja

20 Września 2024
Fenton

Fenton 102.107 Instrukcja

18 Września 2024
Fenton

Fenton RP112L Instrukcja

15 Września 2024
Fenton

Fenton RP115G Instrukcja

14 Września 2024
Fenton

Fenton RP170L Instrukcja

11 Września 2024

Instrukcje gramofon

Najnowsze instrukcje dla gramofon

Bauhn

Bauhn ARTTS-0824 Instrukcja

15 Października 2024
McIntosh

McIntosh MT2 Instrukcja

14 Października 2024
Teac

Teac LP-R500 Instrukcja

14 Października 2024
Technics

Technics SL-1200MK2 Instrukcja

13 Października 2024
Audio-Technica

Audio-Technica AT-LP60XBT Instrukcja

10 Października 2024
Glorious

Glorious VNL-500 USB Instrukcja

9 Października 2024
Pro-Ject

Pro-Ject Debut EVO 2 Instrukcja

9 Października 2024
Pro-Ject

Pro-Ject Debut PRO B Instrukcja

9 Października 2024
Audizio

Audizio RP112L Instrukcja

9 Października 2024