Instrukcja obsługi Fenton RP118

Fenton gramofon RP118

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fenton RP118 (24 stron) w kategorii gramofon. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

RP118 Series Record Player

Ref. nr.: 102.050; 102.052; 102.054; 102.056

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

NÁVOD K POUŽITÍ

V1.1

ENGLISH

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time, fi

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains and do not damage it. A lead

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or mmer. di

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a -16A fuse. 10

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- e unit has not been used for a longer period of time, If th

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture and o. This on

shortens t life time. he

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- his unit have a built-in lead-acid rechargeable battery. If t

Please recharge the battery every 3 months if you are

not going to use the unit for a long period of time. Or the

battery may be damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- I e unit has fallen, always have it checked by a f th

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- ke sure that the mains l cannot be damaged when Ma ead

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate t CE certicate and he

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

1. L e output in

The sound signal from the record is directed to this line

output. You can, for example, connect an amplier or

CD/DVD player to this output.

2. Power supply port DC

To connect the supplied power adapter.

3. Tone arm lever

Enables rais and lowering the tonearm.ing

4. USB port

Use the included USB cable to connect your turntable to

your computer. The USB connection will send audio

from the turntable to your computer.

5. 33 / 45 / 78 RPM switch

Use to adjust the RPM of the turntable platter.

6. Line input

Connect a CD player, digital media player, or other

audio source to this 3,5mm (1/8”) stereo line input.

7. BT out / phono / BT switch

Select the BT out-, Phono- or BT input function.

8. Autostop switch ON/OFF

This switch turns the auto stop- nction /o. When fu on

the automatic stop is enabled, the platform will start

rotating as soon as the tone arm is placed over the

record and will stop rotating when it has reached the

end of the record. Some vinyl records stop fore the end do not stop en the end is reached. In this case turn o Auto-be or wh

stop.

9. Power volume control /

To turn the record player, rotate this knob clockwise until it clicks. When powered on, use this knob to adjust the volume on

for the internal speakers and headphones. To turn o the record player, turn this knob counter clockwise until it clicks.

10. Headp output hone

3.5mm jack to connect your headphones with.

11. LED indicator

12. Arm c lip

This arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to remain in the up

position whil unlocke st d.

13. Stylus cartridge

Cartridge containing the stylus/needle When the turntable is not in use, it is recommendable to place the removable .

protection cover on the stylus.

14. Tone arm

The xed tonearm can be raised and lowered by hand, or by pressing the raise / lower lever.

15. Platter

Spot to put the record . on

16. 45RPM adapter

This adapter allows you to play 45RPM records.

OPERATION

1. Connect the record player with the power adapter and plug the other end into a w power outlet. all

2. Remove white protective needle cover by gently pulling towards the front of the unit.

3. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to

the record.

4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge onto

the desired positi the record and the turntable player starts to play. on of

5. Turn the volume control knob clockwise to adjust the volume.

Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when nished. If Auto Stop Control is

turned OFF, record will NOT stop automatically when nished. Some vinyl records st fore the end do not stop when the op be or

end is reached. In this case set Auto-stop to OFF.

BT CONNECTI ON

Set the mode switch (7) in BT mode. The LED indicator will blink blue color. Turn on the -function on your smartphone or in BT

other BT compatible vice and search for Fenton recordplayer . After iring the LED will light up continuously ou can de “ ” pa , . Y now

play your music from your vice, using the turntable player as speaker. de

This device also features a BT transmitter, meaning that it is possible to play sound from the turntable player via BT to, for

example, a BT speaker .

Note: When the turntable is used as a speaker, all other playback functions cannot be used at the same time. being BT

Specyfikacje produktu

Marka:	Fenton
Kategoria:	gramofon
Model:	RP118
Kolor produktu:	Stal nierdzewna
Regulowany termostat:	Tak
Typ kontroli:	Przyciski
Wbudowany wyświetlacz:	Nie
Łatwy do czyszczenia:	Tak
Wysokość produktu:	717 mm
Szerokość produktu:	595 mm
Głębokość produktu:	550 mm
Waga produktu:	3500 g
Bluetooth:	Tak
Ilość:	1
Zabezpieczenie przed dziećmi:	Nie
Ilość portów USB:	1
Wyjścia słuchawkowe:	1
Wtyk słuchawek:	3,5 mm
Światło wewnętrzne:	Tak
Lampy:	40 W
Model:	Gramofon z napędem pasowym
Liczba piekarników:	2
Typ zasilacza:	Prąd przemienny
Rodzaj timera:	Mechaniczny
Zużycie energii:	4.9 kWh
Typ piekarnika:	Kuchenka elektryczna
Pojemność wnętrza wszystkich piekarników:	50 l
Zakres termostatu piekarnika:	0 - 270 °C
Wejście AUX:	Tak
Napięcie wyjściowe adaptera AC:	5 V
Częstotliwość adaptera AC:	50-60 Hz
Napięcie wejściowe adaptera AC:	100-240 V
Prędkość nominalna:	33 1/3, 45, 78 RPM
Działanie:	Ręczny
Wyjścia linii RCA:	1