Instrukcja obsługi Fender Acoustic Junior GO

Fender wzmacniacz gitarowy Acoustic Junior GO

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fender Acoustic Junior GO (64 stron) w kategorii wzmacniacz gitarowy. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/64
OWNER’S MANUAL | MANUAL DE INSTRUCCIONES
MODE D’EMPLOI | MANUAL DO PROPRIETÁRIO
MANUALE UTENTE | BEDIENUNGSHANDBUCH
INSTRUKCJA OBSŁUGI | NÁVOD K POUŽITÍ
VOD NA POUŽITIE | UPORABNIŠKI PRIROČNIK
Fender’s Acoustic Junior, Acoustic Junior Go and Acoustic SFX II ampliers deliver full, natural tone for acoustic-
electric guitar and microphone, with specially tuned wood cabinets. All three ampliers feature Bluetooth wireless
streaming, studio-quality stereo eects, auxiliary input and headphone output, congurable XLR line outputs, USB
jack for audio recording, and more.
The perfect portable systems for solo performances, the Acoustic Junior and Acoustic Junior Go amps feature
two channels, each with a variety of studio-quality stereo eects. Acoustic Junior Go features convenient and
environmentally friendly rechargeable battery operation with ve hours of full volume from a single charge. With
100 watts of power, a single 8” speaker, compression tweeter, convenient tilt-back kickstand, and light weight,
both amps are ideal for terric guitar-and-vocals rehearsals and performances in a variety of venues.
For solo performances or onstage with a band, the Acoustic SFX II amp also has a dual-channel design with studio-
quality stereo eects and stunning Stereo Field Expansion (SFX) technology, which goes beyond stereo for room-
lling tonal imagery that envelops the listener in a rich acoustic experience. It ups the strength to 200 watts for
perfect guitar-and-vocals power and performance.
INTRODUCTION
1
ENGLISH
Acoustic Junior (left), Acoustic SFX II (center), Acoustic Junior Go (right).
A. CHANNEL INPUT: Combination jack accepts XLR and high-impedance ¼ inputs. Plug in instrument or microphone
here; XLR input provides phantom power for mics that require it (do use ribbon mics, which can be damaged by not
phantom power).*
B. VOLUME: Adjusts overall volume level (including headphones and USB/line outputs).*
C. FX LEVEL: Determines intensity of eect chosen using FX SELECT control.*
D. FX SELECT: Choose among eects including room and hall reverb, echo, delay, chorus, Vibratone, delay plus
chorus, and delay plus reverb, as indicated by EFFECTS DISPLAY. No eect is selected in fully clockwise and fully *
counterclockwise positions. Optional footswitch enables tap-tempo delay time control for echo, delay, delay plus
chorus and delay plus reverb eects.
E. EFFECTS DISPLAY: LEDs illuminate to show eects setting in use for each channel.
F. POWER INDICATOR: For Acoustic Junior and Acoustic SFX II, indicator illuminates green when amplier is on.
For Acoustic Junior Go model , indicator illuminates green to indicate sucient battery charge; illuminates yellow only
to indicate low battery charge; and illuminates red to indicate insucient charge for operation or a faulty battery.
When Acoustic Junior Go is connected to AC power and amplier is on, indicator ashes during battery charging and
illuminates solid green when charging is complete. When charging battery while power is o, indicator ashes at
lower intensity while charging is in progress; when chargiing is complete indicator will illuminate solid green for ve
minutes before turning o.
G: PAIR: Bluetooth pairing button; see Bluetooth section.
H: STEREO SFX (ACOUSTIC SFX II MODEL ONLY): Determines extent of Stereo Field Expansion (SFX) eect, which
creates a 360-degree stereo image using the onboard eects and side-mounted speaker. Note that for SFX to be
heard, an eect must be selected using the FX SELECT control (D), with FX LEVEL (C) set above minimum. Note: Delay
eect will pan in stereo through PHONES output (N) and BALANCED LINE OUTPUTS (P) if this control knob is set only
above minimum.
I. PHASE: To help reduce feedback, press to reverse channel polarity to speaker (including headphones and USB/
line outputs).*
J. LOW, MID AND HIGH: Adjusts bass, midrange and treble tone respectively.*
K. LOOPER BUTTONS (REC/DUB, PLAY/STOP, UNDO): Recording/overdubbing, playback/stop and undo function.
See “Looper” section.
*Indicates identical channel two feature on opposite side of control panel.
NOTE: See “Footswitch” section for other features not found on control panel, including remote eects on/o, tap-tempo
control for delay times and built-in tuner.
CONTROL PANEL
2
ENGLISH


Specyfikacje produktu

Marka: Fender
Kategoria: wzmacniacz gitarowy
Model: Acoustic Junior GO

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fender Acoustic Junior GO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje wzmacniacz gitarowy Fender

Instrukcje wzmacniacz gitarowy

Najnowsze instrukcje dla wzmacniacz gitarowy

Peavey

Peavey Classic 20 Instrukcja

8 Października 2024
SPL

SPL 1160 Instrukcja

7 Października 2024
VOX

VOX AC15C2 Instrukcja

7 Października 2024
VOX

VOX BC112 Instrukcja

5 Października 2024
VOX

VOX VX50 GTV Instrukcja

5 Października 2024
Blackstar

Blackstar FLY 3 Instrukcja

5 Października 2024
Blackstar

Blackstar HTV-112 MkII Instrukcja

5 Października 2024