Instrukcja obsługi Extron FMR 206


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extron FMR 206 (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
The Extron FMR 206 is a 2U rack frame
that mounts in a standard 19-inch
equipment rack, and holds up to six
full-size Flex55 modules.
© 2017 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
68-3166-50 Rev. A
07 17
E: Some modules are difcult to
remove once installed. Make sure the
wiring is correct before snapping in
each module.
Follow these steps to remove an installed Flex55 module.
Flex55 Module Removal
US B ST ORAGE
MARK
Extr onExtr on
RECORD
Secure the FMR 206
to the rack using the
provided #10-32 screws.
1
Connect cables to the Flex55 modules and
snap the modules into the FMR 206.
2
FMR 206 Installation Guide
ExtronExtron
Remove the
module.
Locking
Tabs (2)
Locate the locking tabs and
insert the removal tool up to
the arrow.
Removal Tool
Pull the removal tool
outwards to unhook each
locking tab from the bracket.
Locking
Tab (1)
For modules with one locking tab,
unhook the tab located at the center.
For half modules, the tab is located as
shown below:
Locking
Tab (1)
ExtronExtron
VOLUME
DISPLAY
OFF
ON
ExtronExtron
Extron
Extron
ExtronExtron
1 2 3


Specyfikacje produktu

Marka: Extron
Kategoria: Niesklasyfikowane
Model: FMR 206

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extron FMR 206, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Extron

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane