Instrukcja obsługi Extech MN30
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech MN30 (8 stron) w kategorii multimetr. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
USER MANUAL
True RMS AutoSensingTM
Multimeter + NCV
Model MN30
Please visit www.extech.com for user manual translations
- - MN30 en GB_V1.0 10/16
2
Introduction
Thank you for selecting the Model MN30 True RMS
AutoSensingTM Multimeter with -Non contact Voltage Detector
( )NCV . The MN30 automatically senses AC Voltage, DC Voltage
or Resistance/Continuity measurement types This device is .
shipped fully tested and calibrated and, with proper use, will
provide years of reliable service. Please visit our website
(www.extech.com) to check for the latest version of this User
Manual, Translations, Product Updates, Product Registration,
and Customer Support.
Features
• Unique smart AutoSensingTM feature
• Non-contact Voltage Detector
• Automatic Power OFF (APO)
• Low battery indicator
• Rugged, battery operated, and portable
PER IEC1010 OVERVOLTAGE INSTALLATION CATEGORY
OVERVOLTAGE CATEGORY I
Equipment of OVERVOLT AGE CATEGORY I is equipment for connection to circuits in
which measures are taken to limit the transient over voltages to an appropriate low -
level.
Note – Examples include protected electronic circuits.
OVERVOLTAGE CATEGORY II
Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to be
supplied from the fixed installation.
Note – Examples include household, office, and laboratory appliances.
OVERVOLTAGE CATEGORY III
Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations.
Note – Examples include switches in the fixed installation and some equipment for
industrial use with permanent connection to the fixed installation.
OVERVOLTAGE CATEGORY IV
Equipment of OVERVOLTAGE CATEGORY IV is for use at the origin of the installation.
Note – Examples include electricity meters and primary over-current protection
equipment.
- - MN30 en GB_V1.0 10/16
3
Safety Information
To ensure the safe operation and service of the meter, follow these
instructions closely. Failure to observe warnings can result in severe injury.
WARNINGS
WARNINGS identify hazardous conditions that could cause BODILY HARM
or DEATH.
• Keep hands and fingers behind the finger guards at all times.
• Remove test leads before opening the meter.
• Use the meter only as specified in this User Manual.
• Use the proper terminals when taking measurements.
• Verify the meter’s operation by measuring a known voltage.
• Do not apply more than the rated voltage between terminals or between any
terminal and earth ground.
• Use caution with voltages above 30 VAC RMS, 42 VAC peak, or 60 VDC. These
voltages pose a shock hazard.
• To avoid electric shock, replace batteries when low battery indicator is displayed.
• Disconnect power to the circuit under test and discharge all capacitors before
testing resistance.
• Do not use the meter in the presence of explosive gas or vapor.
• To reduce risk of fire or electric shock, do not use the meter if it is wet.
• Individual protective equipment should be used if HAZARDOUS LIVE parts in the
installation where measurements are to be carried out could be accessible.
CAUTIONS
CAUTIONS identify conditions and actions that could cause DAMAGE to
the meter or equipment under test.
• Do not expose the meter to extremes in temperature or humidity.
Safety Symbols
This symbol, adjacent to another symbol, indicates user
must refer to manual or user guide for further
information.
Risk of electrical shock
Equipment protected by double or reinforced insulation
Specyfikacje produktu
| Marka: | Extech |
| Kategoria: | multimetr |
| Model: | MN30 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Extech MN30, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje multimetr Extech
22 Grudnia 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
24 Września 2024
19 Września 2024
18 Września 2024
14 Września 2024
14 Września 2024
Instrukcje multimetr
- multimetr PeakTech
- multimetr Joy-It
- multimetr Voltcraft
- multimetr Milwaukee
- multimetr Yato
- multimetr Parkside
- multimetr GW Instek
- multimetr Stanley
- multimetr Silverline
- multimetr Testo
- multimetr Aim TTi
- multimetr TFA
- multimetr Chauvin Arnoux
- multimetr Gembird
- multimetr Uni-T
- multimetr Owon
- multimetr Biltema
- multimetr Digitus
- multimetr Vimar
- multimetr Schneider
- multimetr Emos
- multimetr Sonel
- multimetr BaseTech
- multimetr Perel
- multimetr Trotec
- multimetr Velleman
- multimetr Pyle
- multimetr Gossen Metrawatt
- multimetr Fluke
- multimetr Megger
- multimetr Weidmüller
- multimetr BENNING
- multimetr Brandson
- multimetr Metrix
- multimetr Rigol
- multimetr Abus
- multimetr Elro
- multimetr Ferm
- multimetr Hager
- multimetr Testboy
- multimetr Kyoritsu
- multimetr Klein Tools
- multimetr Powerfix
- multimetr Workzone
- multimetr Alecto
- multimetr JUNG
- multimetr Monacor
- multimetr Etekcity
- multimetr Wiha
- multimetr HT Instruments
- multimetr Qian
- multimetr Beha-Amprobe
- multimetr Clas Ohlson
- multimetr Laserliner
- multimetr Proline
- multimetr Ideal
- multimetr Profile
- multimetr Aldi
- multimetr Appa
- multimetr Amprobe
- multimetr Amiko
- multimetr Brennenstuhl
- multimetr Tacklife
- multimetr Somogyi
- multimetr Steren
- multimetr Flir
- multimetr Maxwell
- multimetr Topcraft
- multimetr Altai
- multimetr Plieger
- multimetr Projecta
- multimetr Cablexpert
- multimetr Greenlee
- multimetr Högert
- multimetr Wago
- multimetr REV
- multimetr Bruder Mannesmann
- multimetr Keithley
- multimetr Bearware
- multimetr Metrel
- multimetr Multimetrix
- multimetr Digi-tool
- multimetr Skandia
- multimetr Elma
- multimetr Testec
- multimetr Hubinont
- multimetr Kewtech
- multimetr Strex
- multimetr Mastech
- multimetr MBS
- multimetr MGL Avionics
- multimetr PCE Instruments
- multimetr Micronta
- multimetr CEM
- multimetr Horex
- multimetr Cosinus
- multimetr Kurth Electronic
- multimetr IWH
- multimetr Weltron
- multimetr Sanwa
- multimetr Rohde & Schwarz
- multimetr EEVBlog
- multimetr Kingcraft
- multimetr Caltek
- multimetr Elworks
- multimetr Noyafa
Najnowsze instrukcje dla multimetr
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
28 Marca 2025
26 Marca 2025
14 Marca 2025