Instrukcja obsługi Extech MN24
Extech
Multimeter
MN24
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech MN24 (10 stron) w kategorii Multimeter. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/10
User’s Manual
MiniTecTM Series MultiMeter
Model MN24
2 MN24-en-US_V2.2 07/15
Introduction
Congratulations on your purchase of Extech’s MN24 Multimeter. This meter
measures AC/DC Voltage, DC Current, Resistance, Battery Voltage, Diode
Voltage and Continuity. This professional meter is shipped fully tested and
calibrated and, with proper care, will provide years of safe reliable service.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user
must refer to the manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use,
hazardous voltages may be present
Safety Precautions
1. Improper use of this meter can cause damage, shock, injury or death. Read
and understand this user manual before operating the meter.
2. Make sure any covers or battery doors are properly closed and secured.
3. Always remove the test leads before replacing the battery or fuses.
4. Inspect the condition of the test leads and the meter itself for any damage
before operating the meter. Repair any damage before use.
5. Do not exceed the maximum rated input limits.
6. Use great care when making measurements if the voltages are greater than
25VAC rms or 35VDC. These voltages are considered a shock hazard.
7. Always discharge capacitors and remove power from the device under test
before performing Diode, Resistance or Continuity tests.
8. Remove the battery from the meter if the meter is to be stored for long
periods.
9. Voltage checks on electrical outlets can be difficult and misleading because
of the uncertainty of connection to the electrical contacts. Other means
should be used to ensure that the terminals are not "live".
3 MN24-en-US_V2.2 07/15
1
2
3
4
5
Description
1. LCD Display
2. Function switch
3. COM jack
4. 10A jack
5. Positive jack
Note: Tilt stand, fuse, and battery compartment are located on the rear of the unit
Symbols
•))) Continuity
Diode test
micro (amps)
m milli ( volts, amps)
k kilo (ohms)
ohms
VDC volts direct current
VAC volts alternating current
ADC amps direct current
BAT Low battery
Specyfikacje produktu
Marka: | Extech |
Kategoria: | Multimeter |
Model: | MN24 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Extech MN24, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Multimeter Extech
14 Września 2024
30 Sierpnia 2024
26 Sierpnia 2024
25 Sierpnia 2024
24 Sierpnia 2024
18 Sierpnia 2024
16 Sierpnia 2024
14 Sierpnia 2024
13 Sierpnia 2024
6 Sierpnia 2024
Instrukcje Multimeter
- Multimeter PeakTech
- Multimeter Voltcraft
- Multimeter Milwaukee
- Multimeter GW Instek
- Multimeter Stanley
- Multimeter TFA
- Multimeter Chauvin Arnoux
- Multimeter Gembird
- Multimeter Uni-T
- Multimeter Owon
- Multimeter Emos
- Multimeter Velleman
- Multimeter Gossen Metrawatt
- Multimeter Fluke
- Multimeter BENNING
- Multimeter Metrix
- Multimeter Ferm
- Multimeter Testboy
- Multimeter Kyoritsu
- Multimeter Powerfix
- Multimeter Monacor
- Multimeter Laserliner
- Multimeter Profile
- Multimeter Appa
- Multimeter Amprobe
- Multimeter Tacklife
- Multimeter Somogyi
- Multimeter Steren
- Multimeter Flir
- Multimeter Maxwell
- Multimeter Topcraft
- Multimeter Altai
- Multimeter Plieger
- Multimeter Greenlee
- Multimeter Högert
- Multimeter Wago
- Multimeter Bruder Mannesmann
- Multimeter Metrel
- Multimeter Digi-tool
- Multimeter Elma
- Multimeter PCE Instruments
- Multimeter CEM
Najnowsze instrukcje dla Multimeter
19 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
16 Września 2024