Instrukcja obsługi Extech EX230
Extech
Multimeter
EX230
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech EX230 (14 stron) w kategorii Multimeter. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/14
User's Guide
Multimeter with IR Thermometer
Extech EX230
EX230-en-GB_1.4 4/15 2
Introduction
Congratulations on your purchase of the Extech EX230 Autoranging Multimeter. This meter measures
AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode Test, and
Continuity plus non-contact InfraRed Temperature and contact thermocouple Temperature. Proper use
and care of this meter will provide many years of reliable service.
Safety
This symbol adjacent to another symbol, terminal or operating device indicates
that the operator must refer to an explanation in the Operating Instructions to
avoid personal injury or damage to the meter.
This WARNING symbol indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
This CAUTION symbol indicates a potentially hazardous situation, which if not
avoided, may result damage to the product.
This symbol advises the user that the terminal(s) so marked must not be
connected to a circuit point at which the voltage with respect to earth ground
exceeds (in this case) 600 VAC or VDC.
This symbol adjacent to one or more terminals identifies them as being associated
with ranges that may, in normal use, be subjected to particularly hazardous
voltages. For maximum safety, the meter and its test leads should not be handled
when these terminals are energized.
This symbol indicates that a device is protected throughout by double insulation or
reinforced insulation.
PER IEC1010 OVERVOLTAGE INSTALLATION CATEGORY
OVERVOLTAGE CATEGORY I
Equipment of OVERVOLTAGE CATEGORY I is equipment for connection to circuits in which
measures are taken to limit the transient overvoltages to an appropriate low level.
Note – Examples include protected electronic circuits.
OVERVOLTAGE CATEGORY II
Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to be supplied from
the fixed installation.
Note – Examples include household, office, and laboratory appliances.
OVERVOLTAGE CATEGORY III
Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations.
Note – Examples include switches in the fixed installation and some equipment for industrial use
with permanent connection to the fixed installation.
OVERVOLTAGE CATEGORY IV
Equipment of OVERVOLTAGE CATEGORY IV is for use at the origin of the installation.
Note – Examples include electricity meters and primary over-current protection equipment
WARNING
CAUTION
MAX
600V
EX230-en-GB_1.4 4/15 3
CAUTIONS
Improper use of this meter can cause damage, shock, injury or death. Read and understand
this user manual before operating the meter.
Always remove the test leads before replacing the battery or fuses.
Inspect the condition of the test leads and the meter itself for any damage before operating the
meter.
Use great care when making measurements if the voltages are greater than 25 VAC rms or 35
VDC. These voltages are considered a shock hazard.
Warning! This is a Class A device. This dev
ice can cause interference in residential areas.
Always discharge capacitors and remove power
from the device under test before performing
Diode, Resistance or Continuity tests.
Voltage checks on electrical outlets can be di
fficult and misleading because of the uncertainty
of connection to the recessed electrical contacts. Other means should be used to ensure that
the terminals are not "live".
If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
This device must not be used by children. It contains hazardous objects
as well as small parts
that the children could swallow.
Do not leave batteries and packing material
lying around unattended; they can be dangerous
to children.
In the event that this device will be stored fo
r an extended period of time, remove the batteries.
Expired or damaged batteries can be hazardous to skin. Use suitable hand gloves in such
cases.
Do not short-circuit the battery. Do not place the battery near a fire.
Specyfikacje produktu
| Marka: | Extech |
| Kategoria: | Multimeter |
| Model: | EX230 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Extech EX230, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Multimeter Extech
14 Września 2024
30 Sierpnia 2024
26 Sierpnia 2024
25 Sierpnia 2024
24 Sierpnia 2024
18 Sierpnia 2024
16 Sierpnia 2024
14 Sierpnia 2024
13 Sierpnia 2024
6 Sierpnia 2024
Instrukcje Multimeter
- Multimeter PeakTech
- Multimeter Voltcraft
- Multimeter Milwaukee
- Multimeter GW Instek
- Multimeter Stanley
- Multimeter TFA
- Multimeter Chauvin Arnoux
- Multimeter Gembird
- Multimeter Uni-T
- Multimeter Owon
- Multimeter Emos
- Multimeter Velleman
- Multimeter Gossen Metrawatt
- Multimeter Fluke
- Multimeter BENNING
- Multimeter Metrix
- Multimeter Ferm
- Multimeter Testboy
- Multimeter Kyoritsu
- Multimeter Powerfix
- Multimeter Monacor
- Multimeter Laserliner
- Multimeter Profile
- Multimeter Appa
- Multimeter Amprobe
- Multimeter Tacklife
- Multimeter Somogyi
- Multimeter Steren
- Multimeter Flir
- Multimeter Maxwell
- Multimeter Topcraft
- Multimeter Altai
- Multimeter Plieger
- Multimeter Greenlee
- Multimeter Högert
- Multimeter Wago
- Multimeter Bruder Mannesmann
- Multimeter Metrel
- Multimeter Digi-tool
- Multimeter Elma
- Multimeter PCE Instruments
- Multimeter CEM
Najnowsze instrukcje dla Multimeter
19 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
16 Września 2024