Instrukcja obsługi Extech 430

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech 430 (16 stron) w kategorii Multimeter. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
User's Guide
True RMS Multimeter
Extech 430
EX430-en-GB_v5.6 4/15 2
Introduction
Congratulations on your purchase of the Extech 430 (part number EX430) True RMS Autoranging
Multimeter. This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance,
Frequency, Duty Cycle, Diode Test, and Continuity plus Thermocouple Temperature. Proper use and
care of this meter will provide many years of reliable service.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages
may be present
Double insulation
This WARNING symbol indicates a potentially hazardous situation, which if not
avoided, could result in death or serious injury.
This CAUTION symbol indicates a potentially hazardous situation, which if not
avoided, may result damage to the product.
This symbol advises the user that the terminal(s) so marked must not be
connected to a circuit point at which the voltage with respect to earth ground
exceeds (in this case) 600 VAC or VDC.
WARNING
CAUTION
MAX
600V
EX430-en-GB_v5.6 4/15 3
CAUTIONS
Improper use of this meter can cause damage, shock, injury or death. Read and understand
this user manual before operating the meter.
Always remove the test leads before replacing the battery or fuses.
Inspect the condition of the test leads and the meter itself for any damage before operating the
meter. Repair or replace any damage before use.
Use great care when making measurements if the voltages are greater than 25VAC rms or
35VDC. These voltages are considered a shock hazard.
Always discharge capacitors and remove power
from the device under test before performing
Diode, Resistance or Continuity tests.
Voltage checks on electrical outlets can be di
fficult and misleading because of the uncertainty
of connection to the recessed electrical contacts. Other means should be used to ensure that
the terminals are not "live".
If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
This device is not a toy and must not reach
children’s hands. It contains hazardous objects as
well as small parts that the children could swallow. In case a child swallows any of them,
please contact a physician immediately
Do not leave batteries and packing material
lying around unattended; they can be dangerous
for children if they use them as toys
In case the device is going to be unused for an extended period of time, remove the batteries
to prevent them from training
Expired or damaged batteries can cause cauterization on contact with the skin. Always,
therefore, use suitable hand gloves in such cases
See that the batteries are not short-circuited. Do not throw batteries into the fire.

Specyfikacje produktu

Marka: Extech
Kategoria: Multimeter
Model: 430

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech 430, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Multimeter Extech

Extech

Extech Ex 810 Instrukcja

14 Września 2024
Extech

Extech MN24 Instrukcja

30 Sierpnia 2024
Extech

Extech MA445 Instrukcja

26 Sierpnia 2024
Extech

Extech 382213 Instrukcja

25 Sierpnia 2024
Extech

Extech EX613 Instrukcja

24 Sierpnia 2024
Extech

Extech DVA30 Instrukcja

18 Sierpnia 2024
Extech

Extech EX503 Instrukcja

16 Sierpnia 2024
Extech

Extech EX430A Instrukcja

14 Sierpnia 2024
Extech

Extech EX830 Instrukcja

13 Sierpnia 2024
Extech

Extech MN26 Instrukcja

6 Sierpnia 2024

Instrukcje Multimeter

Najnowsze instrukcje dla Multimeter