Instrukcja obsługi Exquisit GE 9409.1 DT

Exquisit Fornuis GE 9409.1 DT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Exquisit GE 9409.1 DT (40 stron) w kategorii Fornuis. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
GB
90x60 SEMI-PROFESSIONAL FREE
STANDING GAS-ELECTRIC COOKER
USER MANUAL
Dear User,
It is our ultimate desire that you achieve the best performance from our product, which has been
passed through meticulous quality control checks and is manufactured in modern facilities.
To this effect, we recommend that you read the entire guide carefully before operating the product and
keep it as a reference.
ATTENTION!
THIS APPLIANCE SHALL BE INSTALLED IN ACCORDANCE WITH THE REGULATIONS IN FORCE
AND ONLY USED IN A WELL VENTILATED LOCATION. READ THE INSTRUCTIONS BEFORE
INSTALLING OR USING THIS APPLIANCE.
PDF Created with deskPDF PDF Writer - Trial :: http://www
1 - TABLE OF CONTENTS
Part 1 Index
Part 2 Installation of your oven
Part 3 Installation of the oven feet
Part 4 Technical features of your oven
Part 5 Nozzle change operation
Part 6 Important warnings
Part 7 Descriptions of the control panel
Part 8 Descriptions of the appliance
Part 9 Using the burner groups
Part 10 Using oven section
Part 11 Using the grill deflector sheet
Part 12 Maintenance and cleaning
2
PDF Created with deskPDF PDF Writer - Trial :: http://www
2 - INSTALLATION OF YOUR OVEN
Electrical Connection and Security
1. Your oven is adjusted in compliance with 230 Volt 16 Ampere electric supplies. (For 3 phase 230V/400V 32 Ampere) If the mains is different from
these values, contact your authorized service.
2. Electrical connection of the oven should only be made by the sockets with earth system installed in compliance with the regulations. If there is no
proper socket with earth system in the place where the oven will be placed, immediately contact a qualified electrician. Manufacturer shall never be
responsible from the damages that will arise because of the sockets connected to the appliance with no earth system.
3. Electrical cable should not touch the hot parts of the appliance.
4. Some models are supplied without a plug-an-lead set. In this case please use a flexible cable to suitable for connection to mono phase: H05 VV-F 3
G 4 mm2 or for 3 phase: H05 VV-F 5 G 1.5 mm2
Gas Connection and Security
1. Before your appliance is connected to the gas supply, ensure that the gas category and pressure specifications shown in the data plate corresponds
with your gas supply. If necessary call authorized service for adjusting to gas category.
2. This appliance shall be installed in accordance with the regulations in force and only used in a well ventilated space. Read the instructions before
installing or using this appliance. In the interest of safety this appliances must be installed and / or serviced by a competent person as stated in the
gas safety regulations current editions.
3. The appliance must not be installed in a room without a window or other controllable opening. If is installed in a room without a door which opens
directly to the outside, a permanent opening is required. The air circulation should be 2 m3/h per kW of burners.
4. The gas connection should be performed from the right or left. For this reason, change the hose nozzle, plug and the seals.
5. If you make a connection with a flexible metal hose, locate a seal between the main gas pipes.
6. The inner diameter of the flexible hose, which the butane hose nozzle is connected, should be 6mm for the house-type gas tubes. The inner
diameter of the flexible hose, which the natural hose nozzle is connected, should be 15mm.The hose should tightly be fitted to the hose nozzle by
squeezing with a clamp.
7. The hose should be replaced before its last expiry date.
8. Caution! Make the oven connection to the gas inlet valve, the hose length must be short and be sure that there is no leakage. The hose used should
not be longer than 125 cm for safety.
9. RE-INSPECT THE GAS CONNECTION.
10. When placing your oven to its location, ensure that it is at the counter level. Bring it to the counter level by adjusting the feet if necessary.
DO NOT MAKE GAS HOSE and ELECTRICAL CABLE OF YOUR OVEN GO THROUGH THE HEATED AREAS, ESPECIALLY THROUGH THE REAR SIDE OF
THE OVEN. DO NOT MOVE GAS CONNECTED OVEN. SINCE THE FORCING SHALL LOOSEN THE HOSE, GAS LEAKAGE MAY OCCUR.
3
PDF Created with deskPDF PDF Writer - Trial :: http://www

Specyfikacje produktu

Marka: Exquisit
Kategoria: Fornuis
Model: GE 9409.1 DT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Exquisit GE 9409.1 DT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Fornuis Exquisit

Instrukcje Fornuis

Najnowsze instrukcje dla Fornuis