Instrukcja obsługi Ergotron Zido Keyboard Caddy 169BK

Ergotron Nie skategoryzowane Zido Keyboard Caddy 169BK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ergotron Zido Keyboard Caddy 169BK (2 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Universal Keyboard & Mouse Caddy
Compact Keyboard & Mouse Caddy
Assembly Instructions
01Wrist Rest Qty. 1 575-5001-01 ............................................ .....................
02Mouse Rail Qty. 1 575-5001-02 .......................................... ....................
03Mouse Pad Qty. 1 575-5001-03 .......................................... ....................
04– Caddy Platform Qty. 1 575-5001-04 ................................. ....................
05Acorn Nuts Qty. 4 325-5023-00 ........................................ ....................
06– Wood Screws
3/4” (for UKMCBK) Qty. 10 325-5106-00 ........................... ...................
1/2” (for 169BK) Qty. 8 325-5008-00 ................................ ....................
07– Rubber Bumpers Qty. 2 175-5130-03 ............................ ....................
08– Caddy Tray
For UKMCBK Qty. 1 225-5046-00 ....................................... ....................
For 169BK Qty. 1 575-5001-12 ............................................ ....................
09– Caddy Mechanism
For UKMCBK Qty. 1 575-5001-09 ....................................... ....................
For 169BK Qty. 1 575-5001-13 ............................................ ....................
10– Caddy Screws Qty. 4 575-5001-10 .................................... .....................
11– Keyboard Pads Qty. 4 575-5001-11 .................................. .....................
Component list for part # UKMCBK, 169BK
Hello! Thank you for choosing Anthro.
Before beginning, please take a moment to review the parts
list to be sure your shipment is complete. Also, review the
instructions of all Anthro products you are planning to include in
this installation.
An electric drill and 1/8drill bit may be required for this
assembly although some Anthro products are predrilled to
accept these caddies. A 5/32 Hex Driver, (provided with your
cart) plus a Philips screwdriver & an adjustable wrench (not
included) are required for this assembly.
SAVE THESE INSTRUCTIONS!
Questions? 1-800-325-3841
3/4” Wood Screw
325-5106-00 Rubber Bumper
175-5130-03
Step 1
Carefully rotate your Cart upside down. For predrilled Carts:
align the tray with the holes on the cart shelf. Attach the
tray using wood screws (8 for the Compact; 10 for the UKMC)
leaving open the holes at the center front and back. Insert one
wood screw through a rubber stop and install towards the rear
of the cart.
If your cart shelf is not predrilled: use the tray as a template
and mark the hole locations. drill all holes using a Carefully 1/8
drill bit (1/2” deep for compact, 3/4” deep for others). TIP: Use
a small amount of masking tape to mark the depth on your
drill bit. Now install the tray as described above.
Slide the Caddy Mechanism into the Tray and push to the rear.
If needed, rotate the mechanism handle to lift the mechanism
to slide it back. Finally, install the remaining wood screw and
rubber bumper into the tray.
Rubber Bumper
Wood Screws
Tray
DO NOT install a
Wood Screw into this Hole
Front of Cart
STEP 1A
Caddy
Mechanism
Rubber Bumper
Rear
of
Cart
Wood Screw
Rotate Handle
to LIFT
1/2” Wood Screw
325-5008-00
Anthro Corporation anthro.com 1-800-325-3841 10450 SW Manhasset Dr. Tualatin, OR 97062
02
05
03
01
04
06
08
10
11
07
09
Universal Keyboard & Mouse Caddy
Compact Keyboard & Mouse Caddy
Assembly Instructions, cont.
Adjust the Platform height & angle: 1. Rotate the Handle
counterclockwise. 2. Reposition the Shelf, then retighten the
Handle.
Adjust the Platform rotation: 1. Firmly grasp the Platform, then
rotate to the desired angle.
(#10-24) Acorn Nut
325-5023-00
Step 2 (requires the adj wrench & screwdriver)
Carefully rotate your cart back onto its casters.
Pull the mechanism to the front and place the platform onto the
mechanism. Secure the platform using the four philips screws
and the acorn nuts.
Finally, install the mouse rail and pad.
Congratulations! Your assembly is complete.
(#10-24) Caddy Screw
575-5001-10
Adjusting your Keyboard & Mouse Caddy
STEP 2A
STEP 2B
Caddy Screws
Acorn Nuts
Platform
Mouse Rail &
Pad
KB Pads
2
1
Rotate
Congratulations! Your assembly is complete.
Anthro® Corporation anthro.com
1-800-325-3841
Rev. D April 2007
10450 SW Manhasset Dr. Tualatin, OR 97062
For warranty information, please visit:
http://www.anthro.com/support/warranty


Specyfikacje produktu

Marka: Ergotron
Kategoria: Nie skategoryzowane
Model: Zido Keyboard Caddy 169BK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ergotron Zido Keyboard Caddy 169BK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Ergotron

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane

IFM

IFM PE2599 Instrukcja

3 Kwietnia 2025
IFM

IFM RU6035 Instrukcja

3 Kwietnia 2025
Bestway

Bestway 9102S Instrukcja

3 Kwietnia 2025
Bestway

Bestway 9102T Instrukcja

3 Kwietnia 2025
Bestway

Bestway 21177 Instrukcja

3 Kwietnia 2025
Bestway

Bestway 21178 Instrukcja

3 Kwietnia 2025
Ruggard

Ruggard GTUV-SG Instrukcja

3 Kwietnia 2025