Instrukcja obsługi Epson ELPMB75

Epson Projektor ELPMB75

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Epson ELPMB75 (51 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/51
Installation Guide
2
About This Installation Guide
This guide describes how to mount the ultra-short-throw projectors listed below to a wall using the Epson®
ELPMB75 wall mount.
The following projectors are covered by this guide:
EB-810E/EB-815E
The EB-810E is shown in most illustrations in this guide, but the steps are the same for all models unless
otherwise noted.
Safety Instructions
For your safety, read all the instructions in this guide before using the wall mount. Incorrect handling that
ignores instructions in this guide could damage the wall mount or could result in personal injury or property
damage. Keep this installation guide on hand for future reference.
Read the safety instructions in the online User's Guide for your projector and follow the instructions in this
document.
Explanation of Symbols
The warning marks shown below are used throughout this installation guide to prevent personal injury or
property damage. Make sure you understand these warnings when reading this installation guide.
Safety Precautions for Installation
This symbol indicates information that, if ignored, could possibly result in personal injury or even death
due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result in personal injury or physical
damage due to incorrect handling.
This symbol indicates related or useful information.
Symbol indicating an action that must not be done
Symbol indicating an action that should be done
The wall mount is designed specifically for mounting a projector to a wall. If anything other than a
projector is mounted, the weight may result in damage.
If the wall mount falls, it could cause personal injury or property damage.
The installation work (wall mounting) should be performed by specialists who have technical knowledge
and ability. Incomplete or incorrect installation could cause the wall mount to fall and cause personal
injury or property damage.
Follow the steps in this guide to install the wall mount, and be sure to use the bolts and screws specified in
this guide
If the instructions are not followed, this product may fall, resulting in personal injury or an accident.
Warning
Caution
Warning
3
English
Handle the power cord carefully.
Incorrect handling may cause fire or electric shock. Observe the following precautions when handling:
• Do not handle the power plug with wet hands.
• Do not use a power cord that is damaged or modified.
• Do not pull the power cord with too much force when routing the cable through the wall mount.
Do not install the wall mount in a place where it might be subjected to vibration or shock.
Vibration or shock could cause damage to the projector or mounting surface. It could also cause the wall mount or
projector to fall and cause personal injury or property damage.
The installation work should be performed by at least two qualified service personnel. If you need to
loosen any screws during installation, be careful not to drop the wall mount.
If the wall mount or projector falls, it could cause personal injury or property damage.
Make sure you use the included safety wire kit when mounting your projector.
Install the wall mount so that it can sufficiently support the weight of the projector and wall mount, and
resist any horizontal vibration. Use M10 or 3/8 inch x 60 mm nuts and bolts and make sure to use
appropriate wall anchors for your wall type.
Nuts and bolts smaller than M10 or 3/8 inch x 60 mm could cause the wall mount to fall. Epson accepts no
responsibility for any damage or injury caused by lack of wall strength or inadequate installation.
When you mount the projector on the wall with the wall mount, the wall must be strong enough to hold the
projector and the wall mount.
This product should be installed on a concrete wall.
The maximum combined weight of the projector and wall mount is approximately 48.5 lb (22 kg) not
including cables. If the wall is not strong enough, reinforce the wall before installation.
Inspect the wall mount on a regular basis to ensure there are no broken parts or loose screws.
If there are any broken parts, stop using the wall mount immediately. If the wall mount or projector falls, it could
cause personal injury or property damage.
Never modify the wall mount.
Do not disassemble or modify the projector.
There are numerous high-voltage sections inside the product that could cause a fire, electric shock, or an accident.
Do not hang on the wall mount or hang a heavy object on the wall mount.
If the projector or wall mount falls, it could cause personal injury or property damage.
Do not use adhesives, lubricants, or oils to install or adjust the wall mount.
If you use adhesives to prevent the screws from loosening or things such as lubricants or oils on the part of the
projector attached to the slide plate, the case may crack and cause the projector to fall, resulting in personal injury
or property damage.
Tighten all screws firmly after adjustment.
Otherwise, the projector or wall mount may fall and cause personal injury or property damage.
Never loosen the bolts and nuts after installation.
Confirm that the screws have not become loose on a regular basis. If you find any loose screws, tighten them
firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage.
When performing wiring, make sure the cable does not come into contact with any screws or bolts.
Handling the cable incorrectly may cause fire or electric shock.
Do not install in a location subject to oily smoke or smoke for events.
If oils stick to the slide plate fixing part of the projector, the case may crack and cause the projector to fall, resulting
in personal injury or property damage.
When turning on the projector, do not look into the projection lens.
This could cause damage to eyesight due to the powerful light emitted. Take particular care when there are
children present. When turning on the projector at a distance using the remote control, make sure there is no one
looking into the projection lens.
Warning


Specyfikacje produktu

Marka: Epson
Kategoria: Projektor
Model: ELPMB75

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Epson ELPMB75, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor Epson

Epson

Epson PowerLite 5520W Instrukcja

13 Października 2024
Epson

Epson EX3220 Instrukcja

12 Października 2024
Epson

Epson EH-LS500W Instrukcja

10 Października 2024
Epson

Epson ELPMB84 Instrukcja

7 Października 2024
Epson

Epson ELPMB85 Instrukcja

7 Października 2024
Epson

Epson ELPMB64 Instrukcja

7 Października 2024
Epson

Epson ELPMB79 Instrukcja

7 Października 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor

Acer

Acer X137WH Instrukcja

14 Października 2024
Hitachi

Hitachi CP-A352WNM Instrukcja

14 Października 2024
Barco

Barco Thor Instrukcja

14 Października 2024
NEC

NEC NP-M283X Instrukcja

14 Października 2024
Acer

Acer X112 Instrukcja

12 Października 2024
3M

3M X36i Instrukcja

11 Października 2024
Optoma

Optoma EP774 Instrukcja

11 Października 2024
Sanyo

Sanyo PLC-8810N Instrukcja

11 Października 2024
Barco

Barco F70-W6 Instrukcja

10 Października 2024
NEC

NEC NP-M363X Instrukcja

10 Października 2024