Instrukcja obsługi Emos ZO0303

Emos monitor ZO0303

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emos ZO0303 (16 stron) w kategorii monitor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
1536000000_31-ZO0303_00_01_WEB 148 × 210 mm zdroj: 1536000000_31-ZO0303_00_01_WEB
www.emos.eu
ZO0303
ZO0304
ZO0504
ZO0704
GB LED Streetlight
CZ LED Pouliční osvětlení
SK LED Pouličné osvetlenie
PL Lampa uliczna LED
HU Utcai LED lámpa
SI LED ulična svetilka
RS|HR|BA|ME LED ulična svjetiljka
DE LED-Straßenleuchte
UA LED Вуличне освітлення
RO|MD Lampa stradala cu LED-uri
LT LED gatvių apšvietimas
LV LED ielu gaismeklis
EE LED Tänavavalgusti
BG LED лампи за улично осветление
FR|BE Lampe de rue LED
IT Lampione stradale LED
NL LED Straatlamp
ES Farola LED
2
Part No. Input Voltage Power
Color
Temperature
(K)
Luminous ux
(lm) Beam angle Lifespan
(hours)
Protection
rate CRI (Ra) Dimensions
ZO0303
220–240 V AC
30 W 3 000 K
(warm white) 3 600 lm
130 × 60° 36 000 h IP65 >80
412 × 146 × 63 mm
ZO0304 30 W 4 000 K
(neutral white)
3 600 lm 412 × 146 × 63 mm
ZO0504 50 W 6 000 lm 412 × 146 × 63 mm
ZO0704 70 W 8 400 lm 515 × 175 × 63 mm
1 2 3
4 5 6
3
GB | LED Streetlight
LED Streetlight is designed for outdoor use to be mounted onto a pole.
Ingress Protection IP65 – for outdoor use.
MOUNTING:
1. Ensure that the power supply is turned o before installation (see g. 1)
2. Adjust the lamp to desired position and tighten the screw of xing bracket. Connect your mains cable with the input
lead of lamp through the waterproof junction box (see g. 2). (Need to use the junction box of IP65 or above, ensure to
tighten the waterproof screw.)
3. Adjust the lamp Angle and install it in the right position (see g.3). Attach the xing bracket to the light pole with suitable
screws (see g. 4, 5)
4. Turn on the power (see g.6)
Maintenance instructions:
Before maintenance, switch o the lamp and wait until it is cooled.
Clean it with a soft moistened cloth.
Never submerge the lamp in water or other liquids.
During maintenance, observe general rules for occupationalsafety, and be very careful.
WARNING
If the external exible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or his service agent or a similar qualied person in order to avoid a hazard.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar
qualied person.
Terminal block not included. Installation may require advice from a qualied person.
Terminal block for connection of power supply: 3 terminals screw-type or screw-less type, rated for cross-section range
including 1.0 mm² and voltage min 230 V.
The Street light tting may only be connected to electrical mains with installation and protection that is in line with valid
regulations and standards.
Before interfering with the Street light tting or performing maintenance and repair, the light tting must be disconnected
from the mains. This must only be done by a knowledgeable/experienced person within the meaning of valid regulations
on qualication for such activities.
Protection against dangerous contact voltage is ensured through connection to a neutral conductor.
The exterior exible cable for the light tting cannot be replaced; if the cable is damaged, the light tting must
be disposed of.
The light source of the light tting is not replaceable; after the end of the light tting‘s service life, the entire light tting
must be replaced.
The light tting does not come with a terminal box. Installation may require the assistance of a qualied person.
Caution, risk of electric shock.
CZ | LED pouliční osvětle
LED pouliční osvětlení je určeno k montáži na sloup ve vnějším prostředí.
Krytí: IP65 – pro venkovní prostředí
MONTÁŽ:
1. Před instalací se ujistěte, že je vypnuto napájení (viz obr. 1).
2. Nastavte svítidlo do požadované polohy a utáhněte šroub upevňovacího držáku. Propojte síťový kabel se vstupním kabe-
lem lampy přes vodotěsnou rozvodnou krabici (viz obr. 2) (je třeba použít rozvodnou krabici s krytím IP65 nebo vyšším,
zajistěte dotažení vodotěsného šroubu).
3. Nastavte úhel lampy a nainstalujte ji do správné polohy (viz obr. 3). Připevněte upevňovací držák ke sloupu osvětlení
pomocí vhodných šroubů (viz obr. 4, 5).
4. Zapněte napájení (viz obr. 6).
Pokyny pro údržbu:
Před zahájením údržby svítidlo vypněte a vyčkejte, než se ochladí.
Pro čištění používejte vlhký jemný hadřík.
Nikdy svítidlo neponořujte do vody nebo jiné tekutiny.
Během údržby dodržujte obecná pravidla pro bezpečnost práce a buďte zvláště opatrní.
UPOZORNĚNÍ
Jsou-li vnější ohebný kabel nebo šňůra tohoto svítidla poškozené, musejí je pro zabránění nebezpečí nahradit výhradně
výrobce nebo jeho servisní technik nebo osoba se stejnou kvalikací.
Světelný zdroj v tomto svítidle svyměnit pouze výrobce nebo jeho smluvní servisní technik nebo podobně kvalikovaná
osoba.

Specyfikacje produktu

Marka: Emos
Kategoria: monitor
Model: ZO0303

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Emos ZO0303, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Emos

Emos

Emos ZO0304 Instrukcja

29 Września 2024
Emos

Emos ZS3360S Instrukcja

29 Września 2024
Emos

Emos ZO0504 Instrukcja

29 Września 2024
Emos

Emos ZO0303 Instrukcja

29 Września 2024
Emos

Emos ZS2242 Instrukcja

7 Września 2024
Emos

Emos ZS2652 Instrukcja

29 Sierpnia 2024
Emos

Emos ZS3332 Instrukcja

28 Sierpnia 2024
Emos

Emos ZS2941 Instrukcja

27 Sierpnia 2024
Emos

Emos ZS1300A Instrukcja

27 Sierpnia 2024
Emos

Emos ZS2611 Instrukcja

28 Maja 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Joy-It

Joy-It RB-LCD10-2 Instrukcja

29 Września 2024
LG

LG 27HQ710S Instrukcja

29 Września 2024
LG

LG 24MR400 Instrukcja

29 Września 2024
Samsung

Samsung S23C570H Instrukcja

29 Września 2024
AOC

AOC 27E3H2 Instrukcja

29 Września 2024
AOC

AOC 24E3H2 Instrukcja

29 Września 2024
Innocn

Innocn 15A1F Instrukcja

29 Września 2024
AOC

AOC CU34G2XE Instrukcja

29 Września 2024