Instrukcja obsługi Emos EMT757-F

Emos nieskategoryzowany EMT757-F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emos EMT757-F (12 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
1
E
E
E
EM
M
M
MT
T
T
T7
7
7
757
57
57
57-
-
-
-F
F
F
F
EMT757-F
GB DIGITAL SWITCHING SOCKET
CZ DIGITÁLNÍ SPÍNACÍ ZÁSUVKA
SK DIGITÁLNA SPÍNACIA ZÁSUVKA
PL CYFROWY PROGRAMATOR CZASOWY
www.emos.cz
2
Digital switching socket, type EMT757–F
A. Functions
1. The Programmable Digital Timer (hereinafter refer as “Timer”) can preset speci c on/o time of your home electrical appliances. It is ideal for energy saving and home security.
2. The countdown function can switch on/o your appliance on your pre–set time and random functions allows you to switch on and o the appliance in irregular time, it is not only ideal
for home automation, also prevent burglary during your absence.
3. The LCD displays program setting status and real time.
4. With maximum 140 on/o programs per week .
GB
B. Speci cations
Current: 230V~, 50Hz, 8.7A
Max. Power: 2000W
IP Rating: IP20
Working Temperature: 0 to 55°C
Time Setting Interval: 1 Minute
C. Diagram & Descriptions
No. Description Functions
1 LCD Display Shows time and program setting.
2 CLOCK button Return to real time display when in program setting
press together with SET Button to set real time and week
press together with – Button to change to Summer Time
3 CD button Press the button to start/stop countdown program when it is in AUTO
status
4 RND button Press the button to start/stop random program when it is in AUTO
status
5 On/O button Change the setting mode to ON, AUTO or OFF. When press the button
each time, the horizontal line in the LCD moves to ON AUTO OFF
which were silk printed on the Timer
6 SET button To set time and week and to con rm setting
7 + button Press the button to increase the time, week or program group
8 – button Press the button to reduce the time, week or program group
9 S – silk screen Press CLOCK Button and – Button at the same time to change to
printing Summer Time. Time display adds one hour automatically and “S” are
shown on the LCD.
10 Reset button Press once to reset all your preset programs
11 Socket & Plug Connect your appliance to the socket and plug the timer to the wall
AC socket to get power
D. Time Display
There are two di erent kinds of time displays:
1. 12–hour display: the digital number is from 11:59 to 12:00 with AM or PM shown on the LCD
2. 24–hour display: the digital number is from 00:00 to 23:59, no AM or PM is shown on the LCD
3. To change from 12–hour display to 24–hour display, or vice versa, press CLOCK Button
and hold it till the LCD display changes. Press CLOCK Button again to return to original
display.
E. Week & Time Setting
1. Week Setting
1.1 Press and hold the SET Button until the week display  ashes, which indicates setting is
ready
1.2 Press + Button to increase the day, or – Button to reduce the day, the sequence of the
display is shown as follows: Mo Su Tu We Th Fr Sa
1.3 Press +/ – Button once will increase or reduce the day by sequence slowly. To press and
hold the button, the week display moves quickly. Release the button until your desired
day of the week shown on the display. Press SET Button to con rm your setting.
2. Time Setting
2.1 After setting the day of the week, hour display  ashes to indicate setting time can be
started
2.2 Press +Button to increase number of hour, or – Button to reduce hour.
2.3 Press +/ – Button once will increase or reduce each hour slowly. To press and hold
the button, the hour display moves quickly. Release the button until your desired hour
shown on the display. Press SET Button to con rm your setting.
2.4 “Minute” display then ashes to indicate setting minute is ready. Repeat the same
procedures in setting hour as in #2.2 and #2.3 to set minutes.
3. Summer Time Setting
3.1. Press CLOCK Button and – Button at the same time to change to summer time, time
display automatically adds one hour and “S” is shown on the LCD.
3.2. By pressing Clock Button and – Button again to cancel the summer time setting.
Noted: LCD must be in real time display to star t week and time setting. If LCD is in program setting
display, press CLOCK Button once to return to real time display.
F. Program Setting
1. When the LCD is in real time display, press + Button once to change to program setting
display, “1ON” will be shown on the lower left corner of the LCD:
1.1 “1” indicates the program group’s number (program group is from 1 to 14)
1.2 “ON” indicates power on time.
1.3 “OFF” indicates power o time
2. To chose the program group and on/o status, press + Button to increase the group
number, sequence as follows:
1ON 1OFF …… 20ON 20OFF real time display d ON/OFF (for countdown)
3. To reduce the program group number, press –Button, LCD displays in the following
sequence:
d ON/OFF (for countdown) 20OFF 20ON …… 1OFF 1ON real time display
4. After choosing the program group, then can set the week and time. Press SET Button until
the week display  ashes, press + Button each time, the LCD will display the following
in sequence:
3
4.1 MO TU WE TH FR SA SU
4.2 MO TU TH WE FR SA SU
4.3 MO WE FR
4.4 TU TH SA
4.5 SA SU
4.6 MO TU WE
4.7 TH FR SA
4.8 MO TU WE TH FR and
4.9 MO TU WE TH FR SA
5. By pressing the – Button, the week display will be shown in the opposite direction as
above sequence.
6. Press +/ – Button once will increase or reduce the week display slowly. To press and
hold the button, the display moves quickly. Release the button until your desired week
pattern shown on the display. Press SET Button to con rm, week display stops  ashing.
7. After set the day of the week, the hour display  ashes, repeat procedures mentioned in
Part E 2 – Time Setting to set time.
8. To set other program group’s on/o time, repeat procedures mentioned from #2 to #7.
Noted:
(a). To change a preset program, repeat procedures #2 to #7 as mentioned in Part F and input the
new data to replace the old setting
(b). After program setting, press CLOCK Button to return to clock display at once, or it will be
returned automatically after 15 seconds without pressing any other buttons.
G. Countdown Setting
1. When the LCD is in real time display, press – Button once to change to countdown
setting display, “d ON (or OFF)” will be shown on the lower left corner of the LCD
1.1 “d”: indicates the program is in countdown mode
1.2 “ON”: counting down the power on time
1.3 “OFF”: counting down the power o time
2. Press SET Button until the on/o display ashes, setting the countdown power on/o
status is ready.
3. Press +/ – Button to chose countdown on/o program and press SET Button to con rm
4. Hour display ashes after setting the on/o status, then press +/ – Button to increase
or reduce hour and press SET Button to con rm.
5. Minute display then  ashes, press – Button to increase or reduce minute and press +/
SET Button to con rm
6. Second display  ashes, press +/ – Button to increase or reduce the hour display and
press SET Button to con rm. Setting inter val is from 99:59:59 to 1 second.
7. Connect the Timer to the AC socket and set the Timer to AUTO status in order to start /
stop the countdown functions.
8. Press CD Button once to start the countdown function, “d ON (or OFF)” ashes in the
lower corner of the LCD to indicate countdown is in progress. Press CD Button again to
stop the countdown function.
Noted:
(a). When countdown is in progress, LCD is in real time display, press – Button once to view
the countdown details.
(b) To change a preset program, repeat the above procedures #2 to #6 in Part G - Countdown
Setting and input the new data to replace the old setting
(b). After program setting, press CLOCK Button to return to clock display at once, or it will be
returned automatically after 15 seconds without pressing any other buttons.
H. Random Setting
1. Random function turns on and o the appliance irregularly:
1.1 Minimum time for power o : 26 minutes
1.2 Maximum time for power o : 42 minutes
1.3 Minimum time for power on: 10 minutes
1.4 Maximum time for power on: 26 minutes
2. Connect the Timer to the AC socket and set the program to AUTO status in order to start/
stop the random function.
3. Press RND Button once, “r OFF” is ashing in the lower corner of the LCD, random function
is activated. Power is o for 26 to 42 minutes. The mode will change to “r ON”, where
power turns on from 10 to 26 minutes. Then back to “r OFF” again.
4. Press RND Button again can stop the random function, “r OFF”or “r ON” disappears from
the LCD.
I. Override/Resume Preset Program
Press ON/OFF Button each time can override/resume the preset program, LCD changes the
display in the following sequence:
1. ON: override the preset program and appliance remains on at all time
2. AUTO: resume the preset program, appliance will be turned on and o
automatically according to the preset time
3. OFF: override the preset program and appliance remains o at all time
Noted:
(a). The preset countdown or random functions only activates when the Timer is in AUTO status.
(b). When countdown function is activated, random and auto on/o program setting will
not active.
(c). When random function is activated, countdown and auto on/off program setting will
not active.
J. Connections
1. Preset your desired On/o programs on the Timer as mentioned above.
2. Switch o your electrical appliance
3. Connect your appliance’s power cord to the Timer’s socket, then connect the Timer to
the AC socket to get power
4. Switch on your appliance.
5. Appliance will then be turned on/o according to your preset programs unless manual
override pressed.
K. Safety Precaution
• The appliance is designed only for use in a dry interior environment. Protect it from rain,
snow and other extreme conditions. Using of the appliance in the outdoors is forbidden!
• Do not overload the appliance to avoid damage.
• The appliance may be connected and used only in the electricity network 230 V AC (~)/
50 Hz, with grounding according to the valid electricity regulations.
• The extension line may connect only to electrical appliances, which are powered and
connected to the voltage of 230 V AC (~)/ 50 Hz.
• Pay attention to the data on the type label of the electrical appliances connected to the
equipment. The maximum power input of all the connected appliances must not exceed
2000 W (max. current 8,7 A). Maximum induction load is 1A.
• Any other use of this appliance, than the one de ned above, can damage the product
and is connected with the risk of short–circuit, electric shock etc. The appliance must
not be modi ed or tampered with! Follow the safety warnings.
• We do not provide any warranty for damages or injuries caused by improper handling of
the appliance or by negligence to the safety warnings in the manual. In such situations,
the warranty is invalidated.
• The grounding safety conduit the appliance must not be broken – otherwise people
may be in the risk of death.
• The recommended operating temperatures are –10°C to + 40 °C.
• The appliance must not be operated in hazardous environment such as ammable gases,
vapours and dust.
• Do not tamper with the appliance installation and do not take it apart! In case of damage
or malfunction of the appliance, contact the seller.
• When cleaning the appliance and its LCD, use only a sof t dry cloth. Do not use any
detergents and do not dip the appliance into water!
• The appliance must not be operated by children and by persons, whose physical,
sensory or mental incapability or lack of experience prevents them from safe use of the
appliance, unless they are under a supervision of a person overseeing their safety. The
charger must be kept out of the reach of children. Children must be watched not to play
with this equipment.
Do not throw electrical appliances into unsorted communal waste. Use sorted
waste collection points instead.
For the latest info about waste collecting points, contact your local authorities.
If there are any electrical
appliances on waste dumps, the hazardous substances may leak into underground
water and may get into
the food chain and harm your health.

Specyfikacje produktu

Marka: Emos
Kategoria: nieskategoryzowany
Model: EMT757-F

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Emos EMT757-F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Emos

Emos

Emos ZD1452 Instrukcja

22 Maja 2024
Emos

Emos P5523 Instrukcja

18 Maja 2024
Emos

Emos DCGW01 Instrukcja

16 Maja 2024
Emos

Emos ZD2124 Instrukcja

14 Maja 2024
Emos

Emos DCGW10 Instrukcja

11 Maja 2024
Emos

Emos ZN1111 Instrukcja

11 Maja 2024
Emos

Emos ZD1154 Instrukcja

11 Maja 2024
Emos

Emos DCWW32 Instrukcja

10 Maja 2024
Emos

Emos EMT757-F Instrukcja

6 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024