Instrukcja obsługi Emerson MS3100


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emerson MS3100 (29 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/29
HOME AUDIO SYSTEM
with 3 CD CHANGER
and DIGITAL AM/FM RECEIVER
MS3100
OWNER'S MANUAL
Visit our web site at www.emersonradio.com
1
For future reference, record the serial number in the space provided.
Model No: MS3100
Serial Number:
BEFORE WE BEGIN
Thank you..................
for purchasing this Emerson audio product. The Emerson brand is your assurance of
quality, performance and value.
Our engineers have included many useful and convenient features in this product.
Please be sure to read this Owner's Manual completely to make sure you are getting
the maximum benefit from each feature.
This product was manufactured using the highest quality components and standards
of workmanship. It was tested by Emerson inspectors and found to be in perfect working
order before it left our factory. However, there is always the chance that some problem
may occur because of rough handling during shipment to the retail store or to the final
consumer.
If, after reading this Manual, you experience any problems with the operation of this
product, please refer to the instructions for obtaining service at the end of this Manual.
Emerson and Emerson retailers are committed to your satisfaction. Once again, thanks
for purchasing this Emerson audio product.
DANGEROUS VOLTAGE
Uni D oltage that may be of su icient magnitudensulated angerous V ff
to constitute a risk of electric shock to persons is present within this
product's enclosure.
ATTENTION
The Owner's Manual contains important operating and maintenance
instructions.
For your safety, it is necessary to refer to the manual.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION
RI SK O F ELECTRIC SHOCK
DO N OT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
2
Operate controls and switches as
described in the manual.
Before turning on the power, make
certain that the connecting cords and
power cord are properly installed.
When moving the set, be sure to first
disconnect the power cord and remove
cords connected to other equipment.
Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty areas,
placessubject to constant vibration and/
or humid or moist areas.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a class B
digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
CLASS 1 LASER PRODUCT
This product contains a low power Laser Device.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
IMPORTANT NOTES


Specyfikacje produktu

Marka: Emerson
Kategoria: Niesklasyfikowane
Model: MS3100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Emerson MS3100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Emerson

Emerson

Emerson CK2023 Instrukcja

5 Października 2024
Emerson

Emerson CKS1401 Instrukcja

5 Października 2024
Emerson

Emerson MWG1191SB Instrukcja

5 Października 2024
Emerson

Emerson WBS12 Instrukcja

3 Października 2024
Emerson

Emerson CR175B Instrukcja

28 Września 2024
Emerson

Emerson FK609 Instrukcja

28 Września 2024
Emerson

Emerson PD5802 Instrukcja

28 Września 2024
Emerson

Emerson CKS3526 Instrukcja

28 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024