Instrukcja obsługi Emerson iC2196

Emerson Niesklasyfikowane iC2196

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emerson iC2196 (14 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
OWNER’S MANUAL
iC2196
Visit our web site at www.emersonradio.com
Made for all iPod® models including iPod® nano and iPod® mini
CD Stereo Dual Alarm Clock Radio
with Docking for iPod
ＣＲＤ－２１９６Ａ　ＩＢ　ＥＭＥＲ　００１　ＲＥＶ０　ＧＢ．ｐ６５ 2008-1-11, 15:481
CAUTION
Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments / accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
This appliance shall not be exposed to dripping or splashing water and no object filled with liquids
such as vases shall be placed on the apparatus.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
Do not overload wall outlet. Use only power source as indicated.
Use replacement parts as specified by the manufacturer.
The product may be mounted to a wall only if recommended by the manufacturer.
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks.
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTEN-
SION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK
H A Z A R D , D O N O T E X P O S E T H I S A P P L I A N C E T O R A I N O R M O I S T U R E .
The Caution Marking maybe located at the bottom enclosure of the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1 2
The lightning flash with arrowhead
symbol, within an equilater al
triangle is intended to alert the user
to the presence of uninsulated
‘danger ous voltage’ within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral tr iangle is intended
to alert the user to the presence
o f i m p o r t a n t o p e r a t i n g a n d
m a i n t e n a n c e ( s e r v i c i n g )
in s t r uc tio n s in t he lit e r at ur e
accompanying the a p p lia n ce.
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK), NO
USER SERVICEAB LE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
fyi… … … .For Your iPod®
Thank you for purchasing this Home Audio System with integrated iPod® Docking
Station by Emerson Research. This compact, but powerful system features a amplifier
to deliver sound performance that you would never expect from a system
this size.
There’s an integrated iPod® docking station right up front that will accommodate any
iPod® introduced as of January 2006. You can play any iPod® through the speakers of
this system, and charge the battery in your iPod®.
There’s a top mounted CD player that also handles CD-Rs, and CD-RWs. The built in
clock/timer allows you to wake to the radio, the CD player, and electronic buzzer,
or even your iPod®. And we’ve included a convenient Auxiliary input jack (LINE IN
jack) that allows you to connect and play other types of MP3 players through the
speakers of this system as well.
With so many great features in such a compact system it is important that you read
this Owner’s Manual completely to insure that you are getting the maximum benefit
from this unit. Please keep the manual handy for future reference until you are
completely familiar with all the functions and operations of this system.
We have taken great care to make sure that every feature of your system was working
properly when it left our factory. If you have any problems with the set-up or operation
of this system, please do not return it to the retail store.
Please call the Emerson Customer Service Hotline, toll free, at 1-800-898-9020. One
of our customer service representatives will try and resolve the problem for you. If
necessary you will be advised of the proper procedure to obtain a replacement unit.
Once again, thanks for selecting this Home Audio System from Emerson Research.
iPod® is a trademark of Apple Computer Inc., registered in the U.S. and other countries.
ＣＲＤ－２１９６Ａ　ＩＢ　ＥＭＥＲ　００１　ＲＥＶ０　ＧＢ．ｐ６５ 2008-1-11, 15:482
4
CLASS 1 LASER PRODUCT
This product contains a low power Laser Device.
IMPORTANT NOTES
3
Avoid installing this unit in places exposed
to direct sunlight or close to heat radiating
appliances such as electric heaters, on top
of other stereo equipment that radiates too
much heat, places lacking ventilation or
dusty areas, places subject to constant
vibration and/ or humid or moist areas.
Do not attempt to clean this unit with
chemical solvents as this might damage
the finish. Use a clean dry cloth.
Operate controls and switches as
described in the manual.
Before turning ‘On’ the power, make
certain that AC power cord is properly
installed.
Store your CDs in a cool area to avoid
damage from heat.
When moving the set, be sure to first
disconnect the AC power cord.
NOTE: This product complies with DHHS Rule 21 Subchapter J at date of manufacture.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
PREPARATION FOR USE
Unpacking and Set-up
Protect Your Furniture
This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving
when you operate the controls. These ‘feet’ are made from non-migrating rubber
material specially formulated to avoid leaving any marks or stains on your furniture.
However certain types of oil based furniture polishes, wood preservatives,or cleaning
sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on
the furniture. To prevent any damage to your furniture we strongly recommend that
you purchase small self-adhesive felt pads, available at hardware stores and home
improvement centers everywhere, and apply these pads to the bottom of the rubber
‘feet’ before you place the product on fine wooden furniture.
The display carton contains the main unit, five (5) different iPod® adapters, and one
(1) iPod® dust cover.Remove all of the components from the carton and make sure
that nothing is accidentally discarded with the packing materials.
We recommend that, if possible, you save the carton and packing materials in the
event that your unit ever needs to be returned for service. Using the original carton
and packing materials is the only way to protect your unit from damage in transit.
Remove all packing materials from the main unit and the accessories.
Remove any descriptive labels from the front or top panels of your unit. Do not
remove any labels from the back or bottom panels.
Remove any small strips of tape that may have been used to secure the CD door
and the secondary control cover door.
Open the CD door. Remove the dummy CD transit protection card from the CD
mechanism.
Remove the “paper dummy iPod®” from the docking area.
Unwind the AC power cord and extend it to its full length.
Place the main unit on a stable, level surface such as a table, stand, or shelf,
convenient to an AC outlet, out of direct sunlight, and away from sources of excess
heat, dust, moisture, vibration, and strong magnetic fields.
•
•
•
•
•
•
•
•
ＣＲＤ－２１９６Ａ　ＩＢ　ＥＭＥＲ　００１　ＲＥＶ０　ＧＢ．ｐ６５ 2008-1-11, 15:483

Specyfikacje produktu

Marka: Emerson
Kategoria: Niesklasyfikowane
Model: iC2196

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Emerson iC2196, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Emerson

Emerson

Emerson SmartSet CKSW5010 Instrukcja

7 Października 2024
Emerson

Emerson SmartSet CKS8888 Instrukcja

7 Października 2024
Emerson

Emerson CK2023 Instrukcja

5 Października 2024
Emerson

Emerson CKS1401 Instrukcja

5 Października 2024
Emerson

Emerson MWG1191SB Instrukcja

5 Października 2024
Emerson

Emerson WBS12 Instrukcja

3 Października 2024
Emerson

Emerson CR175B Instrukcja

28 Września 2024
Emerson

Emerson FK609 Instrukcja

28 Września 2024
Emerson

Emerson PD5802 Instrukcja

28 Września 2024
Emerson

Emerson CKS3526 Instrukcja

28 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024