Instrukcja obsługi Emerson ER104001


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emerson ER104001 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
PORTABLE ICE MAKER
OWNER’S MANUAL
ER104001
Visit our web site at www.emersonradio.com
UNAUTHORIZED MODIFICATIONS TO THIS DEVICE COULD VOID MANUFACTURER’S WARRANTY
IMPORTANT SAFETY INSTRUCTIONS
Emerson Radio Corp. has taken great care to make sure your unit was in perfect working order when it left our
factory.
This unit has been designed to give you many years of enjoyment and trouble-free operation. Read this manual
before operating this unit to become familiar with its features. In the event you require technical assistance,
please contact the Emerson Radio Customer Service hotline at 1-800-898-9020. Retain this manual for future
reference.
Please follow the precautions below for your new ice maker:
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by-a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
4. This appliance should be set on a steady and flat surface.
5. This ice maker must be properly installed and located in accordance with the installation instructions before
it is used.
6. Unplug the ice maker before cleaning and/or making repairs.
7. We strongly recommend that any servicing be performed by a qualified individual.
8. Do not leave ice maker in extreme cold or warm temperatures.
9. Do not place ice maker near heat sources or open flames.
10. Do not place ice maker where it will be exposed to direct sunlight.
11. Clean the ice maker with a soft, damp cloth. Remove stains with a mild soap. Do not clean the unit with
industrial grade solvents or abrasive chemicals.
12. Do not place heavy items on top of the ice maker.
13. Never install the ice maker where there is a lot of moisture and water can splash.
14. Exercise caution and use reasonable supervision when appliance is used near children.
15. Do not tip over.
16. Do not operate with side or back panels removed.
17. If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to room temperature
before plugging it in.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
- 1 -
INSTALLATION
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric
shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly installed and
grounded.
WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified
electrician or service person if the grounding instructions are not completely understood or if
doubt exists as to whether the appliance is properly grounded.
If it is necessary to use an extension cord, use only a three-wire extension cord that has a
three-blade grounding plug and a three-slot receptacle that will accept the plug on the
appliance. The marked rating of the extension cord should be equal to or greater than the
electrical rating of the appliance
1. Ventilation: Do not block air vents. It is necessary to have adequate ventilation space around the ice maker
in order to sustain proper performance, dissipation of heat, maintain efficiency and keep power consumption
low. There should be a 5 inch minimum clearance maintained at the rear and sides of the unit and 8 inches
on top of the unit.
2. Cleaning: It is highly recommended to t ughly clean the ice maker before first use as shown on page 5. horo
3. Wait One Hour: When first time plugging in, wait one hour for refrigerant fluid to settle before turning on the
unit.
4. Power supply:
Check your local power source. This ice maker requires a 110-120VAC, 60Hz power supply.
Use a receptacle that will accept the ground prong. The power cord of this appliance is equipped with
3-prong (grounding) plug which mates with a standard 3–prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this appliance.
A. Longer cord sets or extension cords are available and may be used if care is exercised in their use.
B. If a long cord or extension cord is used, (1) the marked electrical rating of the cord set or extension cord
should be at least as great as the electrical rating of the appliance. (2) the extension cord must be a
grounding-type 3-wire cord, and (3) the longer cord should be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by children or tripped over unintentionally
NOTES:
The ice maker should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating plate
If you have only a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
Never unplug you ice maker by pulling on the power cord. Always grip plug firmly and pull straight out
from the outlet.
- 2 -
LOCATION OF CONTROLS
1. Ice basket
2. Ice shovel
3. Window
4. Power socket
5. Air outlet
6. Control Panel Indicators
AAdd Water Indicator
B“ ”Ice Full Indicator
C Large Ice Indicator
D Small Ice Indicator
E Cube size select
F On/Off
7. Drain Cap
Standby mode
("L" indicator blinks)
When this unit is connected to an AC power supply but it
is turned OFF, the “L” indicator will blink every 2 seconds.
When the unit is turned on by pressing the ON/OFF button, the
“L” indicator will be constant ON.
- 3 -
OPERATION
IMPORTANT:
1) The ice making cycle lasts 7 to 13 minutes, depending on the size of the ice cube
selection, warmer water and/or room temperature will increase the ice making time. Use
cool water to shorten the ice making time.
2) Only fresh, clean water should be used for making ice. Liquids such as fruit juice, milk and
soda will damage the machine. For best results, the use of distilled wat er is
recommended.
3) Change the water in the water tank every 24
hours to ensure a reasonable hygienic
environment within your ice maker. If unit is not in
use, drain all water in the tank.
1
3
2
4
- 4 -
Lift open the cover, remove the ice basket and
pour water into the tank NOT EXCEEDING THE
WATER FULL MARK.
Reinsert the ice basket and close the cover. Plug
in the unit and Large ice size indicator will blink.
Press the ON/OFF button to begin the ice making
process and the ice size indicator will illuminate.
The default ice cube size is Large. Press the
Select button repeatedly until the LED indicator for
the desired ice size illuminates.
If the room temperature is lower than 60oF, it is
recommended to select Small to avoid ice sticking
together.
If there is water shortage while the ice maker is
on, the unit will stop working automatically and the
Add Water indicator will illuminate. Fill the water
tank with water not exceeding the water full mark
and restart the unit by pressing ON/OF.
The ice maker automatically stops working when
the ice basket is full in which case the Ice Full
indicator will illuminate.


Specyfikacje produktu

Marka: Emerson
Kategoria: Niesklasyfikowane
Model: ER104001

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Emerson ER104001, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Emerson

Emerson

Emerson CK2023 Instrukcja

5 Października 2024
Emerson

Emerson CKS1401 Instrukcja

5 Października 2024
Emerson

Emerson MWG1191SB Instrukcja

5 Października 2024
Emerson

Emerson WBS12 Instrukcja

3 Października 2024
Emerson

Emerson CR175B Instrukcja

28 Września 2024
Emerson

Emerson FK609 Instrukcja

28 Września 2024
Emerson

Emerson PD5802 Instrukcja

28 Września 2024
Emerson

Emerson CKS3526 Instrukcja

28 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024