Instrukcja obsługi Electro Harmonix MEL9


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix MEL9 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
MEL9
Tape Replay Machine
Congratulations on purchasing the Electro-Harmonix MEL9 Tape Replay Machine.
Now any electric guitar player can have access to nine magically quirky, dark and
unique Mellotron® sounds. No more extra devices such as special and
cumbersome -pin MIDI pickup In addition to electric guitar, you can trigger 13 s!
the MEL9 with any instrument that produces an electrical output, such as a
keyboard or a bass, down to 55 Hz or A1.
The polyphonic MEL9 has superior tracking; you can create single notes or
chords with ease. The MEL9 will follow guitar bends, dive bombs, slurs, and any
other guitar expression/performance techniques you can throw at it!
WARNING: Your MEL9 comes equipped with an Electro-Harmonix 9.6DC-200BI power
supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The MEL9 requires
100mA at 9VDC with a center negative plug. Using the wrong adapter or a plug with the
wrong polarity may damage your MEL9 and void the warranty.
GETTING STARTED
Connect the supplied power adapter to the 9V power jack. Plug your instrument
into the INPUT jack; connect your amp to the EFFECT OUTPUT jack. Set the DRY
knob to minimum (fully counterclockwise) and set the other top row knobs to 12
o’clock. Select a preset (“ORCHESTRA” is a good starting point) and step on the
footswitch to turn on the LED. Play your instrument and adjust controls to your
liking.
Mellotron is a registered trademark of David Kean, M. Resch AB and
Markus Resch.
CONTROLS
DRY VOL KNOB
The DRY VOL knob controls the volume of the untreated instrument level the on
EFFECT OUTPUT jack.
EFFECT VOL KNOB
The EFFECT VOL knob controls the overall volume of the selected preset at the
EFFECT OUTPUT jack.
ATTACK KNOB
Use the ATTACK knob to set the volume swell speed, or the speed at which the
effect begins to be heard. Turn the ATTACK knob down (fully counterclockwise)
for a fast attack with minimum swell. Turn the knob up to increase the amount
of swell and to have the notes fade in more gradually.
NOTE: When using the BRASS preset, the ATTACK knob adjusts the speed of a
filter sweep. This adjustment controls how quickly the BRASS sound gets bright.
SUSTAIN KNOB
The SUSTAIN knob controls the amount of time a sound continues to play after
you stop playing. When the SUSTAIN knob is turned down (fully counter-
clockwise), the fadeout time is at its minimum setting. Turn the knob up to
increase the fadeout time.
NOTE: When using the BRASS preset, the SUSTAIN knob adjusts the amount of
“lip buzz”―characteristic of brass instruments such as trumpet―heard at the
onset of new notes. “Lip buzz” is a subtle addition to the BRASS preset, and at
times you may have difficulty hearing the impact on the sound produced by
adjusting the SUSTAIN knob.
PRESET KNOB
Turn the white numbered knob to select a preset sound.
DRY OUTPUT JACK
The DRY OUTPUT jack outputs the signal present at the INPUT jack through a
buffer circuit. In either EFFECT or BYPASS mode, the dry signal is always present
at the DRY OUTPUT jack.
EFFECT TPUT JACK OU
The EFFECT OUTPUT jack sends the mix set by the DRY and EFFECT volume
controls.
BYPASS FOOTSWITCH
Press the BYPASS footswitch to toggle the MEL9 OUTPUT jack between buffered
BYPASS and E mode. The status LED lights when you are in EFFECT mode. FFECT
PRESET DESCRIPTIONS
1. ORCHESTRA This sound represents a full orchestra including an octave
below the normal guitar and produces a gigantic, full sound.
2. CELLO This sound of a solo cello includes the cello s natural vibrato.
3. STRINGS Presenting the sound of a small four-piece string section,
including natural vibrato.
4. FLUTES This preset presents the classic solo flute sound heard on many
recording s.
5. CLARINET This sound of a solo clarinet sounds great both as a solo (played
monophonically) instrument and when playing chords.
6. SAXOPHONE This funky vintage British solo saxophone sound perfect is
for playing Beatles-like rock lines. It blends great with an overdriven guitar.
7. BRASS This preset is a trumpet-like sound, and when playing chords it
produces a great brass section sound. As noted earlier, the ATTACK and
SUSTAIN knobs work differently for this preset than for other presets. The
ATTACK knob controls a filter sweep for brass synthesizer sounds and the
SUSTAIN knob adds the . “lip buzz” characteristic of trumpet/brass sounds
8. LOW CHOIR This sound is a full low-voiced choir made up of many voices.
9. HIGH CHO IR This sound is a higher-voiced choir made up of many voices.
NOTES AND SPECIFICATIONS
Buffered bypass
  Input impedance: 1M
  Output impedance (for both output jacks): 500
Current draw: 100mA


Specyfikacje produktu

Marka: Electro Harmonix
Kategoria: Niesklasyfikowane
Model: MEL9

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix MEL9, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Electro Harmonix

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024