Instrukcja obsługi Electro Harmonix Knockout


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix Knockout (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
KNOCKOUT
Attack Equalizer
Congratulations on your purchase of the Electro-Harmonix KNOCKOUT
ATTACK EQUALIZER! The Knockout is one of the most specific and
powerful tonal adjustment systems that you will ever use. What does that
mean exactly? The KNOCKOUT consists of one Low-Pass filter, one High-
Pass filter and a direct dry signal… each with its own knob. When combined
they yield a very specific and focused tonal sculpture. Extreme and very
specific adjustments are not only simple to set up but also yield a very rich
and defined tone that cannot be obtained from an amplifier or much more
complex equalizing systems. The curves of the filters were specifically
selected for their musical value. They may be used independently to
reinforce a specific area but their real value can be heard when all three are
used together. Get ready for the professional sound that you have been
waiting for.
- CONTROLS -
LOW Knob The LOW knob is a volume control for the low or bass
frequencies. The further you turn the LOW knob clockwise, the louder the
low frequencies will be. The LOW knob controls the output volume from the
Knockout’s 7-Pole Low-Pass Filter. The low pass filter has a fixed cutoff
frequency of 85 Hz. The LOW knob is responsible for contouring the bottom
end in relation to the total sound.
DRY Knob The DRY knob is a volume control for the signal present at the
Input Jack. The output volume of the dry signal will increase as this knob is
rotated clockwise. Use the DRY knob in conjunction with the LOW and HIGH
knobs to create your tone.
HIGH Knob The HIGH Knob is a volume control for the high or treble
frequencies. The further you turn the HIGH knob clockwise, the louder the
treble frequencies will be. The HIGH knob controls the output volume from
the Knockout’s 6-Pole High-Pass Filter. The high pass filter has a fixed cutoff
frequency of 6.5kHz. The HIGH knob is responsible for contouring the high
end to the total sound.
STATUS LED This LED indicates the current state of the unit. When the
LED is lit up, the box is in effect mode. When the LED is off, the box is in
TRUE BYPASS mode.
INPUT Jack This ¼” jack is the audio input to the KNOCKOUT. The input
impedance presented at the Input Jack is 390 k .
OUTPUT Jack This ¼” jack is the output signal that is sent to your
amplifier, another pedal or to your recording setup.
- OPERATION NOTES -
The KNOCKOUT was designed to work with any Instrument level signal from
any instrument or voice. The simplicity of the setup is brilliant. It is basically
a balancing act, which revolves around the Dry signal. Both the LOW and the
High knobs deal with radical amounts of gain. The Dry signal is like the
mediator between both filters. Each element is critical to the overall sound. It
pays to experiment in you search for the right setup for each situation. You
will come across many interesting textures that you may want to write down
and store for recall.
Remember that there is a value in each pot. The and DRY, LOW HIGH
elements may each be used independently or in any combination. With the
KNOCKOUT, a little adjustment goes a long way.
Power, from the internal 9-volt battery or external battery eliminator, is
activated by plugging into the input. The input cable should be removed
when the unit is not in use to avoid running down the battery.
The optional 9V power supply from Electro-Harmonix is US96DC-200BI
(same as used by Boss ™ & Ibanez™). 9.6 volts/DC 200ma. The barrel
connector on the front of the Knockout is for the 9-volt battery eliminator
capable of delivering a minimum of 50 mA of current at 9VDC. The inner ring
of the 9-volt battery eliminator must be negative, the outer ring positive. The
unit’s battery may be left in or taken out when the eliminator is in use.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete
and return the enclosed warranty card within 10 days of purchase. Electro-
Harmonix will repair or replace, at its discretion, a product that fails to operate
due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product
from an authorized Electro-Harmonix retailer. Repaired or replaced units will then
be warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period,
please contact the appropriate office listed below. Customers outside the regions
listed below, please contact EHX Customer Service for information on warranty
repairs at info@ehx.com or +1- -937-8300. USA and Canadian customers: 718
please obtain a (RA#) from EHX Customer Return Authorization Number
Service before returning your product. Include with your returned unit: a written
description of the problem as well as your name, address, telephone number, e-
mail address, and RA#; and a copy of your receipt clearly showing the purchase
date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718- - 937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even
greater rights depending upon the laws of the jurisdiction within which the
product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com


Specyfikacje produktu

Marka: Electro Harmonix
Kategoria: Niesklasyfikowane
Model: Knockout

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix Knockout, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Electro Harmonix

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024