Instrukcja obsługi Electro Harmonix HOLIER GRAIL

Electro Harmonix Niesklasyfikowane HOLIER GRAIL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix HOLIER GRAIL (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

HOLIER GRAIL

Reverb + Golden Gate

- DESCRIPTION -

The Holier Grail is Digital Reverb in a compact guitar pedal. It contains eight

different reverb presets: SPRING, HALL, ROOM and FLERB each at a

LONG and SHORT reverb length. In addition to reverb, there is a GATE that

ends the reverb tail early for an unnatural yet often pleasing reverb sound.

- CONTROLS -

TYPE Switch – Selects the type of reverb sound that the Holier Grail will

produce: SPRING, , . HALL FLERB or ROOM

LENGTH Switch – Selects between a LONG or SHORT reverb length for

the four types of reverb listed above. A LONG reverb length is attributed to

making a bigger sound such as a large hall, room or reverb tank. A SHORT

reverb length will yield a smaller sound, for example a small room, hall or

reverb tank.

BLEND Knob – Is a Wet/Dry control for the reverb signal. As you turn the

BLEND knob clockwise you will hear more reverb and less of your

instrument. The Holier Grail is designed so that as you turn the BLEND knob

from its minimum position to the 12 o’clock position you will hear a subtle

amount of reverb added to the output. As you turn the BLEND knob from 12

o’clock to its maximum position the amount of reverb you hear will increase

dramatically. It is designed this way so musicians can hone in on just the

right amount of subtle reverb added to their instrument’s signal.

GATE Switch – The GATE switch determines how the gate circuit will effect

the audio path. The three positions are OFF, REVERB ONLY and REVERB

+ DIRECT. When the GATE switch is in the OFF position, the gate is

completely bypassed and the gate has no effect on the audio path. In the

REVERB ONLY position, the output of the reverb generator will be fed into

the gate before it goes to the knob. The output of the gate will then BLEND

go to the wet side of the BLEND knob to mix with the dry signal. In the

REVERB + DIRECT position, the signal after the BLEND knob goes into

the gate so that both the wet and dry signals are gated. The output of the

gate is then sent to the MAIN OUTPUT of the Holier Grail. In this last

position, it is possible to gate only the dry signal by turning the BLEND knob

to its counter-clockwise (minimum) position.

GATE THRESHOLD Knob – This knob determines when the gate should

actually be opened or closed. When the GATE THRESHOLD knob is in the

counter-clockwise (minimum) position, the threshold is set to high: it will

take a very loud signal to open the gate. When the GATE THRESHOLD

knob is in the clockwise (maximum) position, the threshold is set to low: the

gate will only need a small signal to open up.

GATE REVERSE Switch – This slide switch enables you to reverse the

normal operation of the gate. When the GATE REVERSE switch is off (left

position), the gate will act normally: the gate is open when the signal is

above the gate threshold and the gate is closed when the signal is below the

threshold. When the GATE REVERSE switch is on (right position), the gate

will act opposite to how it normally works: the gate is closed when the signal

is above the gate threshold and the gate is open when the signal is below

the threshold. This feature can be used to obtain reverb only when the

signal is weak, a delayed reverb tail or to create swelling effects where the

musician fades in their instrument and the gate closes when the instrument

reaches its maximum loudness.

GATE SPEED Switch – This slide switch changes the speed at which the

gate opens or closes. When the GATE SPEED switch is in the FAST

position (right position), the gate opens and closes immediately after the

audio signal has exceeded or fallen below the threshold setting. When the

switch is in the SLOW position (left position), the gate opens and closes

more gradually.

GATE LED – This LED gives you a visual indication of the state that the gate

is in at all times, even if the gate is off. When the gate is closed, the GATE

LED is red. When the gate is open, the GATE LED is green. If the gate is in

the act of opening or closing, it is possible that the LED will not be lit at all.

This usually happens when the GATE SPEED is set to SLOW.

STATUS LED – This LED, located in the top-left corner of the Holier Grail,

indicates if the unit is in effect mode or bypass mode. When the LED is lit

up, the box is in effect mode, when the LED is off the box is in TRUE BYPASS

mode.

INPUT Jack – This ¼” jack is the audio input to the Holier Grail.

MAIN OUTPUT Jack – This ¼” jack is the main audio output. When the

Holier Grail is in Effect mode, the MAIN OUTPUT jack will output the signal

after the BLEND knob; this is a mix of the reverb signal and the dry signal.

When the unit is in jack is TRUE BYPASS mode, the MAIN OUTPUT

connected directly to the INPUT jack.

REVERB ONLY OUTPUT Jack – This ¼” jack sends out just the reverb

signal. The REVERB ONLY OUTPUT jack is connected directly to output of

the reverb generator. When the Holier Grail is in effect mode, this jack

sends out the reverb signal and is not effected by the BLEND knob or any of

the gate functions. When the unit is in bypass mode, this jack is muted; it

does not output a signal.

- OPERATION NOTES -

Getting the most from the Gate:

The gate is a volume-sensitive effect so it works particularly well on

instruments that do not exhibit constant volume changes such as keyboards,

drums and samplers or pre-recorded audio in a studio. Traditional guitarists

may have a hard time obtaining predictable results from the gate without

changing their playing style. The reason for this is because gates, in general,

have a small threshold range where they work well. Often users of gates will

find themselves twiddling the threshold knob to obtain the ideal timing for

when the gate opens and closes. Since most guitarists require two hands to

play, they will not have a free hand to twiddle the threshold knob with.

Knowing this, a guitarist that wants to make full use of the gate should be

able to if they put the time and effort in to learn how the gate works and

what works best with their style of playing. In addition, putting a

compressor before the Holier Grail may help yield more predictable results

when using the gate.

If a super fast gate closure is required, try putting the gate into reverse

mode and the speed on fast. This will allow just the beginning of the

instrument’s attack to pass through the gate before it has a chance to close.

This works particularly well on drum machines.

One common problem that may occur when using the Holier Grail: you plug

it in, the LEDs go on, you play a note but you hear no sound. In most cases

this will happen because the gate is in a mode other than OFF. Whenever

something may seem wrong with your Holier Grail and the LEDs are lit, the

first thing you should always do is turn the gate off.

Specyfikacje produktu

Marka:	Electro Harmonix
Kategoria:	Niesklasyfikowane
Model:	HOLIER GRAIL

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix HOLIER GRAIL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Electro Harmonix

Electro Harmonix Cock Fight Instrukcja

7 Października 2024

Electro Harmonix Cock Fight Plus Instrukcja

7 Października 2024

Electro Harmonix Holy Grail Max Instrukcja

7 Października 2024

Electro Harmonix Spruce Goose Instrukcja

5 Października 2024

Electro Harmonix Germanium 4 Big Muff Pi Instrukcja

5 Października 2024

Electro Harmonix LPB-3 Instrukcja

5 Października 2024

Electro Harmonix Deluxe Memory Man 550-TT Instrukcja

5 Października 2024

Electro Harmonix 2X12 Speaker Cabinet Instrukcja

3 Października 2024

Electro Harmonix Rerun Instrukcja

3 Października 2024

Electro Harmonix 15Watt Instrukcja

30 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024