Instrukcja obsługi Electro Harmonix Deluxe Memory Man 550-TT

Electro Harmonix Niesklasyfikowane Deluxe Memory Man 550-TT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix Deluxe Memory Man 550-TT (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
1
DELUXE MEMORY MAN - 550 TT
TAP TEMPO ANALOG DELAY with FX LOOP,
MODULATION and EXPRESSION PEDAL
CONTROL
Congratulations on your purchase of the Electro-Harmonix Deluxe
Memory Man 550- (DMM550). The DMM550 is designed with high TT
quality, new old-stock bucket brigade ICs for an analog delay sound
equal to the original Deluxe Memory Man. In addition to Tap Tempo
control of the delay time, the DMM550 also includes delay time
modulation, an effects loop in the feedback path of the delay block, an
input gain control, tap tempo divide and optional expression pedal
control over five parameters: Delay Time, Feedback, Modulation Depth,
Rate and Blend. The DMM550 is true bypass.
-CONTROLS and INDICATORS -
KNOBS
DELAY Knob –Sets the delay time from mS to 630 mS. As you turn the 30
DELAY knob clockwise, the delay time will increase. It is normal for the noise
floor to rise as the delay time increases. At the longest delay settings it is normal
to hear ring modulation. If you tap in the delay time, the DELAY knob’s setting
will be ignored until you move it again. If you turn the DELAY knob after tapping
in a delay time, the DELAY knob’s setting will supersede the last tap tempo that
was entered. Turning the DELAY knob, while listening to your echoes, will bend
the pitch of your notes. The DELAY knob can also be used to set the maximum
WARNING: Your Deluxe Memory Man - comes equipped with an 550 TT
Electro-Harmonix 9.6DC-200BI power supply (same as used by Boss® &
Ibanez®: 9.6 Volts DC 200mA). The Deluxe Memory Man - requires 550 TT
200mA at 9VDC with a center negative plug. The D does not take MM550
batteries. Using the wrong adapter may damage your unit and void the
warranty.
2
delay time for expression pedal control. the TAP DIVIDE button functions N.B.:
have no effect on the DELAY knob; pressing this TAP DIVIDE button wh the ile
DELAY knob controls the delay time will not change the delay time.
FEEDBACK Knob Controls the amount of signal that is circulated from the –
output of the delay block to its input. Turning the FEEDBACK knob clockwise
increases the number of echoes. Setting the FEEDBACK control to its maximum
clockwise position will cause the DMM550 to run-away, or self-oscillate.
Alternatively setting the FEEDBACK knob to its minimum position will yield just
one echo or repeat for each of your notes The FEEDBACK knob is also used to .
set the maximum amount of feedback for expression pedal control.
DEPTH Knob –Sets the amount of modulation that is applied to the delay time.
As you turn the DEPTH knob clockwise, the amount of modulation increases.
Turn the DEPTH down to the full Counter-Clockwise (CCW) position to turn
modulation off. The DEPTH knob is also used to set the maximum amount of
modulation for expression pedal control.
RATE Knob – The RATE knob sets the rate or speed of modulation. As you turn
the RATE knob clockwise the modulation rate increases. The DEPTH knob must
be set above the full CCW position to hear the RATE knob change the modulation
speed. Additionally, the RATE knob sets the maximum rate of modulation for
expression pedal control.
GAIN Knob – Sets the input gain for the DMM550. As you turn the GAIN knob
clockwise, the input gain will increase. The total gain range is - dB to +20 dB. 13
The gain block is the first stage that the input signal goes through in the circuit.
Both the dry and wet signals mixed by the BLEND knob go through the gain
block.
BLEND Knob –The BLEND knob is a wet/dry control allowing you to vary the
mix between direct and delayed signals at the OUTPUT jack of the DMM550. Set
the BLEND knob to the full clockwise position for an output that is 100% wet. Set
the Blend knob to full counter-clockwise for an output that is 100% dry. Setting
BLEND anywhere in between will mix the wet and dry signals together.
Additionally the BLEND knob sets the maximum wet/dry mix for expression pedal
control.
SWITCHES & LEDs
BYPASS Footswitch and STATUS LED – The BYPASS FSW is used to toggle
the DMM550 between effect mode and true bypass mode. The red STATUS LED
will light up when in effect mode and turn off in bypass.
EXP. MODE Button and LEDs – The EXP. Mode button cycles through the six
available expression modes: BLEND, RATE, DEPTH, FEEDBACK, DELAY and OFF.
Each time you press the EXP. MODE button the DMM550 will advance to the next
expression mode LED. An expression pedal must be plugged into the EXP. PEDAL
jack to make use of these modes. A lit LED for one of the modes indicates the
3
expression pedal will control that parameter. For example, if the RATE LED is lit,
the expression pedal controls the modulation rate, from slowest (expression
pedal = toe up), to the RATE knob’s current setting (expression pedal = toe
down). When no EXP. MODE LEDs are illuminated the expression pedal is
disabled while it remains plugged into the DMM550. The setting for the EXP.
MODE is saved and recalled when power cycling.
TAP Footswitch – The TAP FSW is used to tap in the delay time. Stomp on the
TAP FSW two times and the delay time will jump to the time between taps (if all
the TAP DIVIDE LEDs are off). If you tap more than twice, it will average the tap
tempo for all taps, it will stop averaging if there is more than 2 seconds between
two consecutive taps. The DMM550 will always take into account the TAP DIVIDE
setting when determining the delay time from the tap tempo. For example, if
your tap time is 1 second and TAP DIVIDE is set to eighth notes, the actual delay
time will be 0.5 seconds. The maximum delay time, when tapped in, is 1.5
seconds; though at this delay time the effect will sound quite lo-fi. The
DMM550 will save and recall the tap tempo when power cycling. In addition, if
an expression pedal is controlling the delay time, the Tap Tempo and TAP
DIVIDE setting will determine the maximum delay time of the expression pedal.
N.B.: The delay time for the DMM550 is always set by the last method used. If
you tap in a delay time, the DELAY knob’s setting is ignored. After tapping in a
delay time, if you turn the delay knob, the tap time will be forgotten and
replaced by the current position of the DELAY knob.
TAP FSW HOLD TO PRESET FEEDBACK –If you press and hold the TAP
FSW, the DMM550 will slowly ramp up to a high FEEDBACK setting. After
releasing the held TAP FSW, the feedback amount ramps back down to the
current FEEDBACK knob setting. The high feedback setting that the DMM550
ramps up to is set at the factory but may be adjusted when you are holding
down the TAP FSW, if held for more than 1 second. If you do not like the setting
chosen at the factory, simply turn the FEEDBACK knob to your preferred setting,
while the TAP FSW is held down. It may take a few tries before nailing the
perfect setting. Release the TAP FSW to save the feedback hold setting. The
DMM550 will remember the TAP FSW HOLD setting after power cycling.
If you want to restore the original factory setting for the FEEDBACK HOLD, press
and hold the EXP. MODE button while applying power to the DMM550. When you
see all 5 expression mode LEDs light up, the factory setting has been restored,
you can now release the EXP. MODE button.
BEAT LED –The green BEAT LED either blinks at the current delay time setting
(if delay time is set by the DELAY knob) or the tempo that you tapped in. Cycling
through the TAP DIVIDE settings will not change the BEAT LED blink rate. If you
are modulating the delay time, the change in delay time due to modulation will
be reflected in the BEAT LED.

Specyfikacje produktu

Marka: Electro Harmonix
Kategoria: Niesklasyfikowane
Model: Deluxe Memory Man 550-TT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix Deluxe Memory Man 550-TT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Electro Harmonix

Electro Harmonix

Electro Harmonix Cock Fight Instrukcja

7 Października 2024
Electro Harmonix

Electro Harmonix Cock Fight Plus Instrukcja

7 Października 2024
Electro Harmonix

Electro Harmonix Holy Grail Max Instrukcja

7 Października 2024
Electro Harmonix

Electro Harmonix Spruce Goose Instrukcja

5 Października 2024
Electro Harmonix

Electro Harmonix Germanium 4 Big Muff Pi Instrukcja

5 Października 2024
Electro Harmonix

Electro Harmonix LPB-3 Instrukcja

5 Października 2024
Electro Harmonix

Electro Harmonix Deluxe Memory Man 550-TT Instrukcja

5 Października 2024
Electro Harmonix

Electro Harmonix 2X12 Speaker Cabinet Instrukcja

3 Października 2024
Electro Harmonix

Electro Harmonix Rerun Instrukcja

3 Października 2024
Electro Harmonix

Electro Harmonix 15Watt Instrukcja

30 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024