Instrukcja obsługi Electro Harmonix Deluxe Memory Man 1100-TT

Electro Harmonix Niesklasyfikowane Deluxe Memory Man 1100-TT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix Deluxe Memory Man 1100-TT (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

DELUXE MEMORY MAN - 1100 TT

TAP TEMPO ANALOG DELAY with FX LOOP,

MODULATION and EXPRESSION PEDAL

CONTROL

Congratulations on your purchase of the Electro-Harmonix Deluxe

Memory Man 1100- (1100- ). The 1100- is designed with high TT TT TT

quality bucket brigade ICs for an analog delay sound equal to the

original Deluxe Memory Man. In addition to Tap Tempo control of the

delay time, the 1100- also includes delay time modulation, an effects TT

loop in the feedback path of the delay block, an input gain control, tap

tempo divide and optional expression pedal control over five parameters:

Delay Time, Feedback, Modulation Depth Rate and Blend. The 1100- , TT

is true bypass.

-CONTROLS and INDICATORS -

KNOBS

DELAY Knob –Sets the delay time from ms to m As you turn the 52 1100 s.

DELAY knob clockwise, the delay time will increase. If you tap in the delay time,

the DELAY knob’s setting will be ignored until you move it again. If you turn the

DELAY knob after tapping in a delay time, the DELAY knob’s setting will

supersede the last tap tempo that was entered. Turning the DELAY knob, while

listening to your echoes, will bend the pitch of your notes. The DELAY knob can

also be used to set the maximum delay time for expression pedal control. N.B.:

the TAP DIVIDE button functions have no effect on the DELAY knob; pressing

TAP DIVIDE when the DELAY knob controls the delay time does not change the

delay time.

WARNING: Your Deluxe Memory Man - comes equipped with an 1100 TT

Electro-Harmonix 9.6DC-200BI power supply (same as used by Boss® &

Ibanez®: 9.6 Volts DC 200mA). The Deluxe Memory Man w/ Tap Tempo

requires 200mA at 9VDC with a center negative plug. The 1100- does not TT

take batteries. Using the wrong adapter may damage your unit and void the

warranty.

FEEDBACK Knob Controls the amount of signal that is circulated from the –

output of the delay block to its input. Turning the FEEDBACK knob clockwise

increases the number of echoes. Setting the FEEDBACK control to its maximum

clockwise position will cause the - to run-away, or self-oscillate. 1100 TT

Alternatively setting the FEEDBACK knob to its minimum position will yield just

one echo or repeat for each of your notes The FEEDBACK knob is also used to .

set the maximum amount of feedback for expression pedal control.

DEPTH Knob –Sets the amount of modulation that is applied to the delay time.

As you turn the DEPTH knob clockwise, the amount of modulation increases.

Turn the DEPTH down to the full Counter-Clockwise (CCW) setting to turn

modulation off. The DEPTH knob is also used to set the maximum amount of

modulation for expression pedal control.

RATE Knob – The RATE knob’s main function is to set the rate or speed of

modulation. As you turn the RATE knob clockwise the modulation rate will

increase. The DEPTH knob must be set above the full CCW position to hear the

RATE knob change modulation speed. Additionally the RATE knob sets the

maximum rate of modulation for expression pedal control.

GAIN Knob – Sets the input gain for the - . As you turn the GAIN knob 1100 TT

clockwise, the input gain increases The total gain range is - dB to +20dB. The . 13

gain block is the first stage that the input signal goes through in the circuit. Both

the dry and wet signals mixed by the BLEND knob go through the gain block.

BLEND Knob –The BLEND knob is a wet/dry control allowing you to vary the

mix between direct and delayed signals at the OUTPUT jack of the - . Set 1100 TT

the BLEND knob to the full clockwise position for an output that is 100% wet. Set

BLEND to full counter-clockwise for an output that is 100% dry. Setting BLEND

anywhere in between will mix the wet and dry signals together. Additionally the

BLEND knob sets the maximum wet/dry mix for expression pedal control.

SWITCHES & LEDs

BYPASS Footswitch and STATUS LED – The BYPASS FSW is used to toggle

the - between effect mode and true bypass mode. The red STATUS LED 1100 TT

will light up when in effect mode and turn off in bypass.

EXP. MODE Button and LEDs – The EXP. Mode button cycles through the six

available expression modes: BLEND, RATE, DEPTH, FEEDBACK, DELAY and OFF.

Each time you press the EXP. MODE button the - will advance to the next 1100 TT

expression mode LED. An expression pedal must be plugged into the EXP. PEDAL

jack to make use of these modes. A lit LED for one of the modes indicates the

expression pedal will control that parameter. For example, if the RATE LED is lit,

the expression pedal controls the modulation rate, from slowest (expression

pedal = toe up), to the RATE knob’s current setting (expression pedal = toe

down). When no EXP. MODE LEDs are illuminated the expression pedal is

disabled while it remains plugged into the - . The setting for the EXP. 1100 TT

MODE is saved and recalled when power cycling.

TAP Footswitch – The TAP FSW is used to tap in the delay time. Stomp on the

TAP FSW two times and the delay time will jump to the time between taps (if all

the TAP DIVIDE LEDs are off). If you tap more than twice, it will average the tap

tempo for all taps, it will stop averaging if there is more than 2 seconds between

two consecutive taps. The - will always take into account the TAP DIVIDE 1100 TT

setting when determining the delay time from the tap tempo. For example, if

your tap time is 1 second and TAP DIVIDE is set to eighth notes, the actual delay

time will be 0.5 seconds. The maximum delay time, when tapped in, is 1.5

seconds; though at this delay time the effect will sound quite lo-fi. The

1100- will save and recall the tap tempo when power cycling. In addition, if an TT

expression pedal is controlling the delay time, the Tap Tempo and TAP DIVIDE

setting will determine the maximum delay time of the expression pedal.

N.B.: The delay time for the 1100- is always set by the last method used. If TT

you tap in a delay time, the DELAY knob’s setting is ignored. After tapping in a

delay time, if you turn the delay knob, the tap time will be forgotten and

replaced by the current position of the DELAY knob.

TAP FSW HOLD TO PRESET FEEDBACK –If you press and hold the TAP

FSW, the - will slowly ramp up to a high FEEDBACK setting. After 1100 TT

releasing the held TAP FSW, the feedback amount ramps back down to the

current FEEDBACK knob setting. The high feedback setting that the - 1100 TT

ramps up to is set at the factory but may be adjusted when you are holding

down the TAP FSW, if held for more than 1 second. If you do not like the setting

chosen at the factory, simply turn the FEEDBACK knob to your preferred setting,

while the TAP FSW is held down. It may take a few tries before nailing the

perfect setting. Release the TAP FSW to save the feedback hold setting. The

1100- will remember the TAP FSW HOLD setting after power cycling. TT

If you want to restore the original factory setting for the FEEDBACK HOLD, press

and hold the EXP. MODE button while applying power to the - . When you 1100 TT

see all 5 expression mode LEDs light up, the factory setting has been restored,

you can now release the EXP. MODE button.

BEAT LED –The green BEAT LED either blinks at the current delay time setting

(if delay time is set by the DELAY knob) or the tempo that you tapped in. Cycling

through the TAP DIVIDE settings will not change the BEAT LED blink rate. If you

are modulating the delay time, the change in delay time due to modulation will

be reflected in the BEAT LED.

TAP DIVIDE Button and LEDs – This button cycles through the six possible

settings for TAP DIVIDE. Each setting, except when all LEDS are off, will divide

the tap tempo to create shorter delay times in sync with your original tempo. It

works like so: The - always assumes that the musician taps in a quarter 1100 TT

note. That quarter note can then be divided down to five other types of notes:

dotted eighth note, quarter note triplet, eighth note, eighth note triplet and

sixteenth note. The sixth mode is quarter note or OFF, where the tap tempo is

not divided down and the delay time is set to your actual tap time. No LEDs are

lit when Tap Divide is set to quarter note/OFF. Below is a chart displaying the six

modes, their divide ratios and an example of the delay time for each mode:

Specyfikacje produktu

Marka:	Electro Harmonix
Kategoria:	Niesklasyfikowane
Model:	Deluxe Memory Man 1100-TT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix Deluxe Memory Man 1100-TT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Electro Harmonix

Electro Harmonix Cock Fight Instrukcja

7 Października 2024

Electro Harmonix Cock Fight Plus Instrukcja

7 Października 2024

Electro Harmonix Holy Grail Max Instrukcja

7 Października 2024

Electro Harmonix Spruce Goose Instrukcja

5 Października 2024

Electro Harmonix Germanium 4 Big Muff Pi Instrukcja

5 Października 2024

Electro Harmonix LPB-3 Instrukcja

5 Października 2024

Electro Harmonix Deluxe Memory Man 550-TT Instrukcja

5 Października 2024

Electro Harmonix 2X12 Speaker Cabinet Instrukcja

3 Października 2024

Electro Harmonix Rerun Instrukcja

3 Października 2024

Electro Harmonix 15Watt Instrukcja

30 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024