Instrukcja obsługi Electro Harmonix Attack Decay

Electro Harmonix Niesklasyfikowane Attack Decay

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix Attack Decay (24 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

ATTACK DECAY

Tape Reverse Simulator

The original Electro-Harmonix Attack Decay is a hard- -find gem among to

legendary guitar pedals. Originally called a Tape Reverse Simulator, it is known for

producing volume and reverse swells, backward tape sounds, artificially short

staccato notes and bowed instrument effects.

The new Electro-Harmonix Attack Decay reinterprets the vintage unit by keeping

the basic functionality but adding more modern features such as Poly mode and

presets. It can produce a single volume envelope like the original, with Poly or

engaged, put each note you play through separate volume envelopes. The built-

in Harmonix fuzz is now a fully controllable distortion with gain, tone and volume

controls. The effects loop allows the musician or sound designer to place the

volume envelope onto whatever signal is present at the Return jack. An

Expression/CV/Clock input and three user presets give the user total control over

their Attack Decay.

WARNING: Your Attack Decay comes equipped with an Electro-Harmonix 9.6DC-200BI

power supply. The Attack Decay requires at 9VDC with a center negative plug. 140mA

Use of the wrong adapter or a plug with the wrong polarity may damage your Attack

Decay and void the warranty. Do not exceed 10 VDC on the power plug. Power supplies .5

rated for less than will cause the Attack Decay to act unreliably. 140mA

- FEATURES -

 Volume envelope swells and quick stabs with adjustable Attack and Decay

times: 4ms to 8s.

 Mono mode: a single volume envelope for the full signal present at the INPUT

or RETURN jacks, the envelope resets when you pluck a new note.

 Poly mode: gives each note you play its own envelope, as seen on the EHX

HOG2.

 Built-in, fully adjustable, Harmonix fuzz enhances the volume envelope effect

and produces bowed instrument sounds.

 Built-in effects loop allows for your own pedals to be inserted fore the be

volume envelopes.

 Expression pedal or CV control over every knob on the Attack Decay.

 Continuous Envelopes turns Attack Decay into a retriggable Tremolo.

 Save and recall up to three presets.

 High quality analog buffered bypass.

 Comes supplied with EHX 96DC-200 power supply.

T C ABLE OF ONTENTS

Notes and Specifications 3

Quick Start Guide 3

Controls and LEDs 5

Connections 8

Mono and Poly Modes 9

Expression Pedal Use and Setup 10

Preset Setup and Use 11

Using the Send and Return FX Loop 13

Restoring Factory Settings 14

Secondary Modes and Options 15

Attack Decay Tips & Tricks 20

Secondary Mode Reference Table 22

Warranty Information and Compliance 24

Attack Decay Manual Version 1.2

N S OTES AND PECIFICATIONS

 Audio input impedance at INPUT jack: 1M 

 Audio o put impedance OUTPUT jack 500 ut at : 

 Audio output impedance at SEND jack: 500 

 Audio input impedance of the RETURN jack: 2M

 Current draw: 140 mA

 Maximum input signal level: +4.0dBu

 Maximum gain: approximately +13dB

Q S G UICK TART UIDE

PLUGGING IN THE ATTACK DECAY

1. Connect the supplied EHX9.6DC AC Adapter into the 9V jack at the

top of the Attack Decay. Plug the AC Adapter into an AC outlet.

2. Connect your guitar or other instrument into the INPUT jack using a

standard 1/4” instrument cable. Connect the OUTPUT jack to your

amp with another standard 1/4 ” instrument cable.

CREATING A VOLUME SWELL EFFECT

1. Ensure none of the PRESET or POLY buttons at the top left of the

Attack Decay are lit. If any button is lit, press once to turn it off. it

2. Ensure that H LED, located above the left footswitch, is turned off.

This turns on and off the Attack Decay’s internal fuzz. If the H LED is

lit, press the left footswitch once to turn it off.

3. Turn the BLEND knob to maximum. This ensures that only the volume

envelope effect is heard and no dry signal is mixed- . in

4. Set the DECAY knob to maximum Set ATTACK to about 10 . . o’clock

5. 50% Start with the VOL knob at . Adjust after playing if needed.

6. Start with the SENS knob set to 50%. Turn SENS if the envelope up

does not trigger with each note; lower SENS if it triggers too often.

7. Now engage POLY mode by pressing the POLY button. You might need

to turn up the ATTACK knob as well.

USING THE HARMONIX FUZZ EFFECT

1. Follow the instructions above to get the desired envelope effect.

2. Deactivate POLY mode if POLY is currently lit.

3. Set the H.VOL knob to 9 o’clock as this fuzz can get loud!

4. Press and release the left footswitch to activate the Harmonix effect.

5. Adjust the sound of the Harmonix fuzz with the three small knobs in

the upper right corner. The HARMONIX knob sets gain/saturation,

TONE adjusts brightness, and H.VOL is the fuzz volume control. ’s

Specyfikacje produktu

Marka:	Electro Harmonix
Kategoria:	Niesklasyfikowane
Model:	Attack Decay

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix Attack Decay, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Electro Harmonix

Electro Harmonix Cock Fight Instrukcja

7 Października 2024

Electro Harmonix Cock Fight Plus Instrukcja

7 Października 2024

Electro Harmonix Holy Grail Max Instrukcja

7 Października 2024

Electro Harmonix Spruce Goose Instrukcja

5 Października 2024

Electro Harmonix Germanium 4 Big Muff Pi Instrukcja

5 Października 2024

Electro Harmonix LPB-3 Instrukcja

5 Października 2024

Electro Harmonix Deluxe Memory Man 550-TT Instrukcja

5 Października 2024

Electro Harmonix 2X12 Speaker Cabinet Instrukcja

3 Października 2024

Electro Harmonix Rerun Instrukcja

3 Października 2024

Electro Harmonix 15Watt Instrukcja

30 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024