Instrukcja obsługi Electro Harmonix 720 Stereo Looper

Electro Harmonix Niesklasyfikowane 720 Stereo Looper

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Electro Harmonix 720 Stereo Looper (12 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
1
720
Stereo Looper
Congratulations on your purchase of the 720 looper! Enjoy 720 total seconds of
high-quality, stereo recording time and the ability to store 10 different loops. The
720 looper is packed with features such as reverse and ½ speed effects,
playback fadeout, real-time progress display, and a convenient programmable
second footswitch.
WARNING: Your 720 comes equipped with an Electro-Harmonix 9.6DC-200 power supply
(same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The 720 requires at 9VDC 75mA
with a center negative plug. Using the wrong adapter or a plug with the wrong polarity may
damage your 720 and void the warranty.
– – FEATURES
- minutes of loop recording time 12
- 10 selectable independent Loops that remain in memory until you erase them ,
- High quality uncompressed audio: -bit A/D/A, 44.1k Sample Rate 24 Hz
- Undo-Redo function (also available via optional footswitch)
- Reverse and ½ speed effects at the touch of a button or a footswitch tap
- Footswitch selectable for Stop or Effects
- Handy playback progress mode with seek function
- Unlimited overdubbing
- Optional external footswitch control for selecting loops and Undo/Redo
- Adjustable fadeout (trails) time
- Programmable looping order: REC/PLAY/DUB or REC/DUB/PLAY
- AC adaptor included or may be battery powered
2
– – CONTROLS and INDICATORS
LEVEL Knob – Controls the output level of the L being played. Your dry oop
signal remains at unity signal level from input to output. The dry signal also
remains analog throughout the . 720
LOOP Footswitch e the LOOP footswitch to record, overdub, and playback –Us
loops. The LOOP footswitch can also be used to stop and undo-redo loops. See
the on page 5 to learn how to use this footswitch to QUICK START GUIDE
create loops.
STOP/FX Footswitch The STOP/FX footswitch can be set to either STOP –
mode or FX mode. Select either mode by pressing and holding the PUSH:
MODE STOP button for 2-seconds. When in mode, a DOT appears on the
display next to the STOP label. When in mode, the DOT is off.FX
REC LED – Indicates when a loop is being recorded or overdubbed.
PLAY LED – Indicates when a loop is being played or overdubbed.
MEM LED – Indicates loop audio i in memory for the current loop bank.s
LOOP Knob and PUSH: MODE Button The LOOP knob has no pointer –
because it is attached to a rotary encoder that can be continuously rotated in
either direction. This knob also has a PUSH: MODE button with two functions: 1)
to cycle through one of three available modes, and 2) once a mode is selected,
to adjust the value of that mode from 0-9. All modes and values are shown on
the digit display.
SELECTING/ ADJUSTING MODES The 3 selectable modes are toggled on and –
off by pressing the MODE button once. When mode-select is active, the digit
display will flash the currently selected mode. Turn the LOOP knob to cycle
through the three possible modes:
L = Loop Select
p = Loop Progress
F Fadeout Time =
When you arrive at the mode you would like to adjust, press the MODE button
once to select the mode. display will stop flashing aThe nd it will show the
selected mode value from 0-9. The selected mode can now be adjusted with the
LOOP knob from 0- 9.
3
REVERSE Button – Press the REVERSE button to play the loop in reverse. The
REVERSE button glows red when enabled. Reverse can be used at any time to
playback or overdub a loop.
½ SPEED Button Pressing the ½ SPEED button causes the pitch of the loop –
to go down one octave and the tempo is halved. If a loop is overdubbed during
half-speed mode, returning to normal speed playback causes the pitch of the
overdub to go up one octave and the tempo is doubled. The ½ SPEED button
glows red when enabled. ½ SPEED can be used at any time during playback or
while overdubbing a loop.
FX LED – Indicates when an effect is active. The FX LED automatically lights
when the REVERSE or ½ SPEED buttons are used and the STOP/FX footswitch is
programmed to operate in STOP mode. Alternatively, the FX LED will toggle
on/off each time the STOP/FX footswitch is pressed and programmed to operate
in FX mode.
MONO/L INPUT –¼” Left Instrument/Line Input Jack. Plug the output of your
instrument or another effects pedal into this jack. If you use just one input we
recommend you use the MONO/L input. The input impedance presented at this
jack is 1MΩ. The maximum allowable signal level into this jack is +6 dBu. The
input is unbalanced.
R INPUT – ¼” Right Input Jack. Plug the output of your instrument or another
effects pedal into this jack. Use this jack for stereo recording. The input
impedance presented at this jack is el 1MΩ. The maximum allowable signal lev
into this jack is +6 dBu; it is an unbalanced input.
MONO/L OUTPUT – ¼” Left Output Jack. The Left output signal is sent
through this jack. The dry signal present at the Left input will be output on the
MONO Output jack. The source impedance of the MONO Output is /L /L
approximately 33 0Ω.
Note: the MONO/L OUTPUT jack also functions as a power switch when
powered from a battery. Disconnect the cable to save battery power when the
720 is not in use.
R Output – ¼” Right Ou tput Jack. The Right output signal is sent through this
jack. The dry signal present at the Right input jack is output to the R Output
jack. The source impedance of the R Output is 33 0Ω.

Specyfikacje produktu

Marka: Electro Harmonix
Kategoria: Niesklasyfikowane
Model: 720 Stereo Looper

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Electro Harmonix 720 Stereo Looper, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Electro Harmonix

Electro Harmonix

Electro Harmonix Cock Fight Instrukcja

7 Października 2024
Electro Harmonix

Electro Harmonix Cock Fight Plus Instrukcja

7 Października 2024
Electro Harmonix

Electro Harmonix Holy Grail Max Instrukcja

7 Października 2024
Electro Harmonix

Electro Harmonix Spruce Goose Instrukcja

5 Października 2024
Electro Harmonix

Electro Harmonix Germanium 4 Big Muff Pi Instrukcja

5 Października 2024
Electro Harmonix

Electro Harmonix LPB-3 Instrukcja

5 Października 2024
Electro Harmonix

Electro Harmonix Deluxe Memory Man 550-TT Instrukcja

5 Października 2024
Electro Harmonix

Electro Harmonix 2X12 Speaker Cabinet Instrukcja

3 Października 2024
Electro Harmonix

Electro Harmonix Rerun Instrukcja

3 Października 2024
Electro Harmonix

Electro Harmonix 15Watt Instrukcja

30 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024