Instrukcja obsługi Einhell RT-PL 82

Einhell strugarka RT-PL 82

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Einhell RT-PL 82 (4 stron) w kategorii strugarka. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Safety instructions

Planer

Please read and keep in a safe place.

Si_Hi_ _GB_SPK7:_ 01.06.2010 8:54 Uhr Seite 1Planer

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded)

power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges

and refrigerators. There is an increased risk of

electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

3. Persona safetyl

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool. Carrying

power tools with your finger on the switch or

energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving

parts.

g) If devices are provided for the connection of

dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

Si_Hi_ _GB_SPK7:_ 01.06.2010 8:54 Uhr Seite 2Planer

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool?s operation. If

damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations different from those

intended could result in a hazardous situation.

5. Service

a) Have your power tool serviced by a qualified

repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Planer safety warnings

a) Wear ear protectors when planing .

Exposure to noise can cause hearing loss.

NOTE The above warning applies only to planers

and may be omitted for other than .tools planers

b) Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

c) Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

Wait for the cutter to stop before setting the tool down.

An exposed cutter may engage the surface leading to

possible loss of control and serious injury.

Si_Hi_ _GB_SPK7:_ 01.06.2010 8:54 Uhr Seite 3Pl

6. Recommendation

We recommend that the tool always be supplied

via a residual current device with a rated

residual current of 30 mA or less.

Specyfikacje produktu

Marka:	Einhell
Kategoria:	strugarka
Model:	RT-PL 82
Kolor produktu:	Stal nierdzewna
Źródło zasilania:	Prąd przemienny
Wbudowany wyświetlacz:	Nie
Filtr wody:	Nie
Położenie urządzenia:	Wolnostojący
Napięcie wejściowe AC:	Tak V
Wysokość produktu:	1875 mm
Szerokość produktu:	600 mm
Głębokość produktu:	655 mm
Waga produktu:	3600 g
Poziom hałasu:	44 dB
Obciążenie:	- W
Klasa efektywności energetycznej (stara):	A+
Zawias drzwiczek:	Prawy
Waga wraz z opakowaniem:	4000 g
Roczne zużycie energii:	282 kWh
Pojemność netto:	283 l
Pojemność lodówki netto:	210 l
Pojemność brutto:	300 l
Światło wewnątrz lodówki:	Tak
Pojemność lodówki brutto:	212 l
Pozycja zamrażarki:	Umieszczony w części dolnej
Pojemność zamrażarki netto:	73 l
Czas przechowywania podczas awarii zasilania:	- h
Ocena w gwiazdkach:	4*
Pojemność zamrażarki brutto:	88 l
Funcja szybkiego zamrażania:	Tak
Moc pobierana:	850 W
Tryb klimatu:	SN-T
No Frost (lodówka):	Tak
No Frost (zamrażarka):	Tak
System nie zamrażania:	Tak
Miękki uchwyt:	Tak
Typ drzwiczek:	Podwójny
Wbudowana zamrażarka:	Tak
Prędkość biegu jałowego:	15000 RPM
Prowadnica równoległa:	Tak
Port do odsysania pyłu:	Tak
Worek na kurz załączony:	Tak
Materiał płyty:	Aluminium
Głębokość wręgowania:	18 mm
Maksymalna szerokość strugania:	82 mm
Maksymalna grubość czipu:	3 mm