Instrukcja obsługi Einhell GC-HH 9046

Einhell nożyce do żywopłotu GC-HH 9046

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Einhell GC-HH 9046 (30 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/30

Table of Contents

1. Important Safety Instructions 2

2. Overview 3

3. Feature Identication 4

4. Setup 5

4.1 Powering the USB Charger/Hub Unit 5

4.2 Door Locks 5

5. 32-Port USB Charger/Hub 6

5.1 USB Charger/Hub Features 6

5.2 Connecting Smartphones 6

to the USB Charger/Hub

5.3 Connecting a Computer to the 6

USB Charger/Hub

6. Wall Mounting 7

7. Desktop Placement 8

8. Specications 9

9. Storage, Service and Cleaning 10

10. Warranty and Product Registration 10

Español 11

Français

Русский

Deutsch 41

32-Port USB Charging Station

for Smartphones

Models: CSD32USB, CSDXB32USB, CSDXS32USB

(Series number: AG-0737)

Owner’s Manual

TrippLite.Eaton.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

1. Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described

in this manual. Failure to comply may invalidate the warranty and cause property damage or personal injury.

USB Charger/Hub Unit:

• Connect the unit to an outlet that is in accordance with your local building codes and adequately protected against excess current,

short-circuits and earthly faults.

• The electrical outlet supplying power to the equipment should be installed near the unit and be easily accessible.

• The AC plug on the power supply cord serves as the disconnect device.

• Connect the unit directly to a properly grounded AC power outlet.

• Do not modify the plug, and do not use an adapter that would eliminate the ground connection.

• If any of the following situations arise, schedule an appointment with a service technician to have your equipment inspected:

• The equipment has been exposed to moisture

• The equipment has been dropped and damaged

• The equipment shows obvious signs of breakage

• The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of

the life support equipment or to significantly affect its safety or effectiveness is not recommended.

Charging Station Cabinet:

• Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and

gasses, conductive contaminants, dust and direct sunlight.

• Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging

station’s external ventilation openings.

• For best performance, keep indoor temperature between 32°F and 86°F (0°C and 30°C).

• Do not remove any warnings, cautions or descriptive labels from the charging cart.

• The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack or mount it

unassisted. Use a mechanical device such as a forklift or pallet jack to move the charging station in the shipping container.

• Do not place containers of liquid or stack items on the cabinet.

• Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.

• Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original

packing materials may cause product damage that will void the warranty.

For Wall-Mount and Desktop Installations:

• The charging station must be installed by a qualified technician.

• Before mounting, first make sure that the wall surface can safely support the combined load of the charging station, equipment

stored and all attached hardware and components.

• The charging station can support equipment up to its maximum load capacity of 180 lb. (81.6 kg).

• Always use suitable mounting means when installing to cinder blocks, concrete, drywall or wood studs. Install securely to the wall

using proper hardware (not provided).

WARNING: The supporting surface must be able to safely support the combined load of the charging station, equipment stored and all

attached hardware and components (see 8. Specifications for more information on your model’s weight and dimensions).

2. Overview

Your charging station is an all-in-one solution for storing, charging and syncing for up to 32 smartphones. Your charging station can be

conveniently mounted to walls as well as used for stationary desktop installations. To prevent theft and device tampering, your

charging station enclosure comes equipped with locking steel doors. A padlock hasp accessory (optional) attaches to the doors to

provide an extra measure of protection.

Explanation of Symbols:

CAUTION: RISK OF DANGER

PROTECTIVE BONDING TERMINAL

AC VOLTAGE

WALL-MOUNT WARNINGS: The wall surface, wall studs and all user-supplied mounting hardware must be able to support the

combined weight of the cabinet and all equipment that will be installed in the cabinet. The cabinet can support equipment up to its

maximum load capacity of 180 lb. (81.6 kg).

Wall-mounting holes are spaced 16 in. (406 mm) apart horizontally to accomodate standard placement of wall studs. It is advised to

safety distribute the weight of the cabinet and all installed equipment.

Specyfikacje produktu

Marka:	Einhell
Kategoria:	nożyce do żywopłotu
Model:	GC-HH 9046

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Einhell GC-HH 9046, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nożyce do żywopłotu Einhell

Einhell Royal HEC 551 Instrukcja

9 Października 2024

Einhell HEC 440 Instrukcja

8 Października 2024

Einhell HEC 450 Instrukcja

8 Października 2024

Einhell GE-CH 1855 Li Instrukcja

8 Października 2024

Einhell Royal REH 680 Instrukcja

8 Października 2024

Einhell BG-EH 551 Instrukcja

7 Października 2024

Einhell AHS 24 Instrukcja

3 Października 2024

Einhell BG-EH 3551 T Instrukcja

29 Września 2024

Einhell Royal BHS 24 Instrukcja

18 Września 2024

Einhell Royal HES 550 Instrukcja

18 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar HT-5510 Instrukcja

13 Stycznia 2025

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025

Echo HC-1500 Instrukcja

7 Stycznia 2025

DeWalt DCHT821 Instrukcja

3 Stycznia 2025

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025

Hurricane HHS 580 Instrukcja

29 Grudnia 2024

Gardenline GLH 692 Instrukcja

29 Grudnia 2024

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024

Gardenline GLH 664 Instrukcja

29 Grudnia 2024