Instrukcja obsługi Dürkopp Adler 550-12-12
Dürkopp Adler
Naaimachine
550-12-12
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dürkopp Adler 550-12-12 (14 stron) w kategorii Naaimachine. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/14
Contents Page:
Preface and General Safety Notes
Part 1: Operating Instructions Cl. 550-12-12
1. Product Description
1.1 Short Description and Proper Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3 Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Operation
2.1 Threading the Needle Thread (Upper Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Threading the Hook Thread (Lower Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Thread Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Upper Thread Quantity for Sure Stitch Formation . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.5 Optional Equipment reinforcing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5.2 Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5.3 Operating Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.5.4 Loading the reinforcement tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.5 Adjustments on the tape unwinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.6 Replacing the presser foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3. Maintenance
3.1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2 Lubricating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Home
1.3 Technical Specification
Machine head: Class 935 - 940 - 6
Needle system: 934 SIN
Needle thickness: Nm 90
Threads: As needle and hook thread spun monofilament
sewing yarns
Stitch type: 401 double chain stitch
Number of stitches: 3200 / min (recommended number of stitches
ex works)
Stitch length: 2.5 mm for rear feed dog (fixed setting)
Transport length for forward feed dog and
transport foot adjustable up to 6 mm
Stitch condensation: 1.5 mm
Operating pressure: 6 bar
Air consumption: approx. 0.5 NL per work cycle
Nominal voltage: 1 x 220 - 240 V, 50 / 60 Hz
Dimensions: (H x W x D) 1600 x 1530 x 951 mm
2. Operation
2.1 Threading the Needle Thread (Upper thread)
Caution Risk of Injury !
Turn main switch off.
Thread the upper thread only with the machine switched off.
–Place the thread spool 1 on the thread stand.
–Guide the thread as shown through the holes and tension discs in
the thread guide plate.
–Guide the thread in order through guide plate 3, thread guide 4,
thread tension 8, thread guide 6 and thread drawing plate 7.
–Guide the thread through thread guide 13 and thread drawing lever
12.
–Guide the thread through pre-tension 9, thread guide 10 and
needle eye. Cut off the excess thread end.
2.2 Threading the Hook Thread (Lower Thread)
Caution Risk of Injury !
Turn main switch off.
Thread the lower thread only with the machine switched off.
–Place the thread spool 2 on the thread stand.
–Guide the thread as shown through the holes and tension discs in
the thread guide plate.
–Guide the thread in order through the guide plate 3, thread guide
4, thread tension 5 and lower thread guide 19.
–Feed the thread through the slot (see arrow) in the thread gutter 18.
–Remove cover plate 11 and swing holder 14 up out of its catch.
Guide the thread through thread guides 15 and thread drawing
hook 16.
Swing holder 14 back and allow to catch.
–Pull the thread through the hook 17 with a tweezers and pull tight.
Insert cover plate 11 again.
6
Specyfikacje produktu
Marka: | Dürkopp Adler |
Kategoria: | Naaimachine |
Model: | 550-12-12 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Dürkopp Adler 550-12-12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Naaimachine Dürkopp Adler
19 Września 2024
9 Września 2024
8 Września 2024
6 Września 2024
6 Września 2024
1 Września 2024
31 Sierpnia 2024
30 Sierpnia 2024
28 Sierpnia 2024
25 Sierpnia 2024
Instrukcje Naaimachine
- Naaimachine AEG
- Naaimachine LERAN
- Naaimachine Livoo
- Naaimachine SilverCrest
- Naaimachine Toyota
- Naaimachine Singer
- Naaimachine Medion
- Naaimachine Brother
- Naaimachine Husqvarna
- Naaimachine Emerio
- Naaimachine Baby Lock
- Naaimachine Victoria
- Naaimachine Bernina
- Naaimachine Juki
- Naaimachine Necchi
- Naaimachine Kenmore
- Naaimachine Huskystar
- Naaimachine Veritas
- Naaimachine Pfaff
- Naaimachine Tesco
- Naaimachine Carina
- Naaimachine Alfa
- Naaimachine Janome
- Naaimachine Guzzanti
- Naaimachine Anker-Bernette
- Naaimachine Elna
- Naaimachine Jocca
- Naaimachine Bernette
- Naaimachine RCE
- Naaimachine Lifetec
- Naaimachine Union Special
- Naaimachine Vendomatic
- Naaimachine Lewenstein
- Naaimachine Silver
- Naaimachine Sinojo
- Naaimachine Gritzner
- Naaimachine W6
Najnowsze instrukcje dla Naaimachine
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024