Instrukcja obsługi Dürkopp Adler 523
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dürkopp Adler 523 (12 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
Instructions for setting individual mechanisms
523
Minerva Boskovice, a.s., Sokolská 60, CZ - 680 17 Boskovice
Tel.: +420-516 453434, 453433, 494111 Fax: +420-516 452165 http://www.minerva-boskovice.com
Edition: 01/2004 Printed: Czech Republic
Contens - Instructions for setting individual:
1. General safety instructions .............................................................................................................................................. 1
2. Introduction ........................................................................................................................................................................ 1
3. Setting of the feeder height above the throat plate .................................................................................................... 2
4. Setting of the needle and feeder movement ................................................................................................................ 2
5. Mounting of the throat plate ............................................................................................................................................ 2
6. Setting of the elliptical path of the feeder ................................................................................................................... 2
7. Setting of the feeding length .......................................................................................................................................... 3
8. Presser foot replacement ................................................................................................................................................. 3
9. Presser foot lifting setting ............................................................................................................................................... 3
10. Setting of the needle bar height ..................................................................................................................................... 3
11. Adjustment of the hook timing ........................................................................................................................................ 4
12. Setting of the middle part of the hook holder .............................................................................................................. 4
13. Setting of the opening hook of the hook ....................................................................................................................... 5
14. Dismounting and mounting of the driving belt ............................................................................................................ 5
15. Setting the needle punch into the middle of the needle groove
in the throat plate in longitudinal direction ................................................................................................................. 6
16. Setting of the needle punch into the middle of the needle groove
in the throat plate in transversal direction ................................................................................................................... 6
17. Setting of the zigzag stitch mechanism for the right and left position .................................................................... 6
18. Setting of the zigzag stitch shifting ................................................................................................................................ 7
19. Setting of the controlling force of the zigzag stitch adjusting .................................................................................. 7
20. Setting the controlling force of the continuous adjusting of the zigzag stitch position ...................................... 7
21. Taking up of the teeth clearance in the zigzag stitch gearing ................................................................................... 7
22. Setting of the needle bar and of the hook shaft position ........................................................................................... 8
23. Time setting of the control cam of the thread cutter ................................................................................................... 8
24. Setting of the movable cutting knife lifting.................................................................................................................. 9
25. Setting of the upper thread tensioner releasing .......................................................................................................... 9
26. Setting of the adjusting spring function ....................................................................................................................... 9
27. Setting of the starting position of the movable thread cutter ................................................................................... 9
28. Setting of the stationary knife presure .......................................................................................................................... 9
29. Setting of the stop in the top position of the needle .................................................................................................. 1 0
30. Making an upper thread reserve ..................................................................................................................................... 1 0
31. Dismounting and mounting of the plate ........................................................................................................................ 1 0
32. Dismounting and mounting of the movable cutting knife .......................................................................................... 1 0
1
Instructions for setting individual mechanisms
1. General safety instructions
The non-observance of the following safety instructions can cause bodily injuries or damages to the machine.
1. The machine must only be commissioned of the instruction book and operated by persons with appropriate training.
2. Before putting into service also read the safety rules and instructions of the motor supplier.
3. The machine must be used only for the purpose intended. Use of the machine without the safety devices is not permitted. Observe
all the relevant safety regulations.
4. When gauge parts are exchanged (e.g. needle, top roller, needle plate, feed dog and bobbin) when treading, when the workplace is
left, and during service work, the machine must be disconnected from the mains by switching off the master switch or disconnecting
the mains plug.
5. Daily servicing work must be carried out only by appropriately trained persons.
6. Repairs, conversion and special maintenance work must only be carried out by technicians or persons with appropriate training.
7. For service or repair work on pneumatic systems the machine must be disconnected from the compressed air supply system.
Exceptions to this are only adjustments and functions checks made by appropriately trained technicians.
8. Work on the electrical equipment must be carried out only by electricians or appropriately trained persons.
9. Work on parts and systems under electric current is not permitted, except as specified in regulations DIN VDE 0105.
10. Conversion or changes to the machine must be authorized by us and made only in adherence to all safety regulations.
11. For repairs, only replacement parts approved by us must be used.
12. Commissioning of the sewing head is prohibited until such time as the entire sewing unit is found to comply with EC directives.
It is absolutely necessary to respect the safety instructions marked by these signs.
Danger of bodily injuries !
Please note also the general safety instructions.
IMPORTANT WARNING
In spite of all safety measures made on the machines, inappropriate actions of the operator may lead to dangerous situations. In industrial
sewing machines, attention should be paid to the following still remaining possible sources of injury:
1. Moving sewing needle
- risk of injury when sewing with raised pressure foot or top roller, because the finger guard is then positioned too high.
2. Moving thread take-up lever
- risk of injury when inadvertently or intentionally inserting the finger(s) between the thread take-up lever and its guard.
3. Moving pressure member
- risk of injury when holding sewn work in immediate vicinity of the pressure member and beginning to insert under the pressure
member a considerably thicker sewn work portion,
- risk of injury when sinking the pressure member.
4. When switched off, the clutch motor slows down by inertia but would be reactivated by an accidental treading down of the motor
treadle. To avoid such risk, it is advised to hold the handwheel by hand and slightly to depress the motor treadle.
2. Introduction
This part contains instruction for regulating the mechanisms of the sewing machine head.
For setting the machine, simple setting aids are used which are included in the accessory of the machine. Besides these aids, universal
measuring devices are used, such as slide calliper, feeler gauges and dynamometer for measuring the thread tension.
It is adviceable to order the locating fixture S791 947001 for setting:
- the feeder planeness and and height
- the hook timing
- the hook medium part holder
- presser foot lifting
Specyfikacje produktu
| Marka: | Dürkopp Adler |
| Kategoria: | maszyna do szycia |
| Model: | 523 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Dürkopp Adler 523, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do szycia Dürkopp Adler
13 Października 2024
11 Października 2024
6 Października 2024
29 Września 2024
28 Września 2024
25 Września 2024
23 Września 2024
22 Września 2024
20 Września 2024
20 Września 2024
Instrukcje maszyna do szycia
- maszyna do szycia AEG
- maszyna do szycia LERAN
- maszyna do szycia Livoo
- maszyna do szycia SilverCrest
- maszyna do szycia Easy Home
- maszyna do szycia Toyota
- maszyna do szycia Singer
- maszyna do szycia Medion
- maszyna do szycia Prixton
- maszyna do szycia Brother
- maszyna do szycia Husqvarna
- maszyna do szycia Primera
- maszyna do szycia Emerio
- maszyna do szycia Kayser
- maszyna do szycia Privileg
- maszyna do szycia Baby Lock
- maszyna do szycia Victoria
- maszyna do szycia Bernina
- maszyna do szycia Solac
- maszyna do szycia Juki
- maszyna do szycia Necchi
- maszyna do szycia Kenmore
- maszyna do szycia Huskystar
- maszyna do szycia Veritas
- maszyna do szycia Pfaff
- maszyna do szycia Łucznik
- maszyna do szycia Husqvarna-Viking
- maszyna do szycia Tesco
- maszyna do szycia EasyMaxx
- maszyna do szycia Carina
- maszyna do szycia Lervia
- maszyna do szycia Kunft
- maszyna do szycia Alfa
- maszyna do szycia Janome
- maszyna do szycia Guzzanti
- maszyna do szycia Minerva
- maszyna do szycia Anker-Bernette
- maszyna do szycia Sinbo
- maszyna do szycia Jata
- maszyna do szycia Elna
- maszyna do szycia Termozeta
- maszyna do szycia Jocca
- maszyna do szycia Bernette
- maszyna do szycia Yamato
- maszyna do szycia RCE
- maszyna do szycia Lifetec
- maszyna do szycia Union Special
- maszyna do szycia Vendomatic
- maszyna do szycia Home Electric
- maszyna do szycia Empisal
- maszyna do szycia Crofton
- maszyna do szycia Lewenstein
- maszyna do szycia Durabase
- maszyna do szycia Meister Craft
- maszyna do szycia Micromaxx
- maszyna do szycia Yamata
- maszyna do szycia Weasy
- maszyna do szycia Silver
- maszyna do szycia Prince
- maszyna do szycia Hofmann
- maszyna do szycia Kohler
- maszyna do szycia Sinojo
- maszyna do szycia Gritzner
- maszyna do szycia W6
- maszyna do szycia Zippy
- maszyna do szycia Feiyue
- maszyna do szycia Mediashop
- maszyna do szycia ER
- maszyna do szycia Novamatic
- maszyna do szycia Siemssen
- maszyna do szycia Mio Star
- maszyna do szycia SteamMax
Najnowsze instrukcje dla maszyna do szycia
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024