Instrukcja obsługi Dürkopp Adler 367


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dürkopp Adler 367 (52 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/52
367
Spezialnähmaschine
Serviceanleitung
Service Instructions
Instructions de service
Instrucciones de servicio
Instruções de serviço
Istruzioni per il servizio
Postfach 17 03 51, D-33703 Bielefeld Potsdamer Strasse 190, D-33719 Bielefeld
Telefon +49 (0) 5 21/ 9 25-00 Telefax +49 (0) 5 21/ 9 25 24 35 www.duerkopp-adler.com
Ausg./Edition: 07/2006 Printed in Federal Republic of Germany Teile-/Part-No.: 0791 367641
D
GB
F
E
P
I
General safety instructions
The non-observance of the following safety instructions can cause
bodily injuries or damages to the machine.
1. The machine must only be commissioned in full knowledge of the
instruction book and operated by persons with appropriate
training.
2. Before putting into service also read the safety rules and
instructions of the motor supplier.
3. The machine must be used only for the purpose intended. Use of
the machine without the safety devices is not permitted. Observe
all the relevant safety regulations.
4. When gauge parts are exchanged (e.g. needle, presser foot,
needle plate, feed dog and bobbin) when threading, when the
workplace is left, and during service work, the machine must be
disconnected from the mains by switching off the master switch or
disconnecting the mains plug.
5. Daily servicing work must be carried out only by appropriately
trained persons.
6. Repairs, conversion and special maintenance work must only be
carried out by technicians or persons with appropriate training.
7. For service or repair work on pneumatic systems, disconnect the
machine from the compressed air supply system (max. 7-10 bar).
Before disconnecting, reduce the pressure of the maintenance
unit.
Exceptions to this are only adjustments and functions checks
made by appropriately trained technicians.
8. Work on the electrical equipment must be carried out only by
electricians or appropriately trained persons.
9. Work on parts and systems under electric current is not permitted,
except as specified in regulations DIN VDE 0105.
10. Conversion or changes to the machine must be authorized by us
and made only in adherence to all safety regulations.
11. For repairs, only replacement parts approved by us must be used.
12. Commissioning of the sewing head is prohibited until such time
as the entire sewing unit is found to comply with EC directives.


Specyfikacje produktu

Marka: Dürkopp Adler
Kategoria: maszyna do szycia
Model: 367

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dürkopp Adler 367, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje maszyna do szycia Dürkopp Adler

Instrukcje maszyna do szycia

Najnowsze instrukcje dla maszyna do szycia

Pfaff

Pfaff 463H Instrukcja

15 Stycznia 2025
Elna

Elna Lotus ZZ Instrukcja

14 Stycznia 2025
Juki

Juki MS-1190 Instrukcja

12 Stycznia 2025
Pfaff

Pfaff 295-1 Instrukcja

12 Stycznia 2025
Alfa

Alfa 1412 Instrukcja

11 Stycznia 2025