Instrukcja obsługi Drayton HTS3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Drayton HTS3 (2 stron) w kategorii Thermostaat. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
06490287001 A
ATAG
What is a cylinder thermostat?
A cylinder thermostat switches on and off the heat supply from the boiler
to the hot-water cylinder. It works by sensing the temperature of the water
inside the cylinder, switching on the water heating when the temperature
falls below the thermostat setting, and switching it off once this set
temperature has been reached.
Turning a cylinder thermostat to a higher setting will not make the water
heat up any faster. How quickly the water heats up depends on the
design of the heating system, for example, the size of boiler and the heat
exchanger inside the cylinder.
The water heating will not work if a time switch or programmer has
switched it off. And the cylinder thermostat will not always switch the
boiler off, because the boiler sometimes needs to heat the radiators.
Cylinder thermostats are usually fitted between one quarter and one third
of the way up the cylinder. The cylinder thermostat will have a temperature
scale marked on it, and it should be set at between 60C and 65C, then left
to do its job. This temperature is high enough to kill off harmful bacteria in
the water, but raising the temperature of the stored hot water any higher
will result in wasted energy and increase the risk of scalding.
If you have a boiler control thermostat, it should always be set to a
higher temperature than that of the cylinder thermostat. In most boilers,
a single boiler thermostat controls the temperature of water sent to both
the cylinder and radiators, although in some there are two separate
ATAG
ATAG
ATAG
ATAGATAG
Technology Ltd
Technology Ltd
Technology Ltd
Technology Ltd Technology Ltd
80 Churchill Square Business Centre
Kings Hill
West Malling
Kent
M 19 4YUE

Specyfikacje produktu

Marka: Drayton
Kategoria: Thermostaat
Model: HTS3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Drayton HTS3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Thermostaat Drayton

Drayton

Drayton Digistat RF902 Instrukcja

8 Października 2024
Drayton

Drayton Digistat RF901 Instrukcja

8 Października 2024
Drayton

Drayton PTS1 Instrukcja

8 Października 2024
Drayton

Drayton Easy 2 Instrukcja

8 Października 2024
Drayton

Drayton Digistat+1RF Instrukcja

8 Października 2024
Drayton

Drayton Digistat+C RF Instrukcja

8 Października 2024
Drayton

Drayton HTS3 Instrukcja

8 Października 2024
Drayton

Drayton Digistat 2290B Instrukcja

8 Października 2024
Drayton

Drayton Digistat 22902 Instrukcja

8 Października 2024

Instrukcje Thermostaat

Najnowsze instrukcje dla Thermostaat

Oreg

Oreg AT90E Instrukcja

9 Października 2024
Oreg

Oreg AT60E Instrukcja

9 Października 2024
Heatit

Heatit PRO Instrukcja

9 Października 2024
Heatit

Heatit MULTIREG6 Instrukcja

9 Października 2024
Avidsen

Avidsen HomeFlow W Instrukcja

9 Października 2024
ORNO

ORNO OR-SH-17701 Instrukcja

8 Października 2024
ORNO

ORNO OR-SH-17702 Instrukcja

8 Października 2024
STI

STI -9102 Instrukcja

8 Października 2024
STI

STI -9110 Instrukcja

8 Października 2024
Remeha

Remeha iSense RF Instrukcja

7 Października 2024