Instrukcja obsługi Dormakaba FF-L-2890B

Dormakaba nieskategoryzowany FF-L-2890B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dormakaba FF-L-2890B (17 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/17
[INCH- POUND]
FF-L-2890B
April 17, 2012
Superseding
FF-L-2890A
August 1, 2004
FEDERAL SPECIFICATION
LOCK EXTENSION (PEDESTRIAN DOOR LOCK ASSEMBLY PREASSEMBLED, S
PANIC ) AND AUXILIARY DEADBOLT
The General Services Administration has authorized the use of this federal specification by all
f ederal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specication covers lock extensions: pedestrian door ock preassembled l
(PDPL), pedestrian door lock assembl P ay panic, (PDLA ) and uxiliary deadbolts (ADB) for
use with changeable combination locks and strikes. Pedestrian door assemblies and auxiliary
deadbolts include designs that meet the applicable requirements of Americans with
Disabilities Act (ADA), Accessibility t he Architectural Barriers Act (ABA), Uniform Federal
Standards (UFAS), the International Building Code (IBC), the National Fire Protection
Association International Fire Code (IFC). (NFPA), and
1.1.1 Limited use. Lock extensions tested and qualied under this specication are to be sold
only to the Federal Government, Government contractors specically authorized to purchase
these lock extension s, or other organizations or persons specically authorized or required by
the government to use these lock extensi on s.
1.2 Intent. The intent of this specication is to provide door locking hardware that meets the
labeling requirements of the door auxiliary deadbolts and that provides lock assemblies and
security. shall have beenLock extensions submitted to a testing laboratory listed for fire door
application testing and issuing the mark “F” for listed re door stamped/etched on the latch
assembly under each of the categories. These lock extensions shall be listed for aftermarket
installation on existing fire door assemblies as the only locking device on the door.
1.3 Application. Pedestrian door preassembled locks used on (PDPL) are fire labeled and
non-labeled doors only locking device. Pedestrian door lock a p as the ssemblies anic
(PDLAP) are used in applic withations . Auxiliary door assembly occupancies deadbolts are
used as door auxiliary deadbolts (ADB) for security.
FSC 5340
-L-2890B FF
2
1.4 Classification. These lock extensions shall be of the following types and strike
congurations:
Type I – PDPL – A A156.2 Grade 1 F44 key access control – combination ANSI/BHM
preassembled lock
Type II – PDPL – ANSI/BHMA A156.2 Grade 1 F44 keyless access control – combination
preassembled lock
Type III – – ANSI/BHMA A156.3 Grade 1 Type I key access control – PDLAP rim lock exit
device
Type IV – – ANSI/BHMA A156.3 Grade 1 Type I keyless access control – PDLAP rim lock
exit device
Type V – – ANSI/BHMA A156.36 Grade 1 key access control – lock auxiliary deadbolt ADB
Type VI – – ANSI/BHMA A156.36 Grade 1 keyless access con – ADB trol lock auxiliary
deadbolt
Strike 1 – Single or double door in-swing mortise
Strike 2 – Single door out- swing
Strike 3 – Single or double door in- swing surface
Strike 9 – Double door out-swing surface
1.5 Classification descriptions.
Type I – PDPL ontrol -L-2740 with integrated mechanical access c capability, FF
electromechanical combination lock and ADA compliant one-function egress
mechanism. For use on standard egress doors, right and left hand
interchangeable, standard and reverse bevel capable.
Type II – PDPL -L-2740 with integrated electronic access control capability, FF
electromechanical combination lock and ADA compliant one-function egress
mechanism. For use on standard egress doors, right and left hand
interchangeable, standard and reverse bevel capable.
Type III – s control capability, FF-L-2740 PDLAP with integrated mechanical acces
or use on electromechanical combination lock and fire rated panic hardware. F
re exit doors, right and left hand interchangeable, standard and re verse bevel
capable.
Type IV – -L-2740 PDLAP with integrated electronic access control capability, FF
electromechanical combination lock and re rated panic hardware. For use on
re exit doors, right and left hand interchangeable, standard and reverse bevel
capable.
Type V – -L-2740 electromechanical combination lock and escape mechanism ADB with FF
For use on standard extension with a manually operated life safety device.
egress doors, right and left hand interchangeable, standard and reverse bev el
FF-L-2890B
3
capable.
Type VI – -L-2740 electromechanical combination lock and escape mechanism ADB with FF
extension with an automatic with keyed reset function. For life safety device
use on standard egress doors, right and left han rd and d interchangeable, standa
reverse bevel capable.
Compliance requirement for Types I through VI:
ANSI/BHMA A156.2, A156.3, & A156.36 – ADA/UFAS compliant
ANSI/BHMA A156.2, A156.3, & A156.36 – ADA/UFAS compliant with access control
interface
ANSI A1/BHMA A156.2, A156.3, & 56.36 – Compliant with A117.1 ANSI/BHMA
2. APPLICABLE DOCUMENTS
2.1 Government publications. The following documents, of the issues in eect on the date of
invitation for bids or request for proposals, form a part of this specication to the extent
specified herein.
Federal Specifications:
-L-2740 – Locks, Combination FF , Electromechanical
(Activities outside the Federal Government may obtain copies of federal
s s, standards, pecification and commercial item descriptions as specified in the General
Information section of Specications, Standards and the Index of Federal Commercial Item
Descriptions. The Index is for sale on a subscription basis by the Superintendent of
Documents, U. S. Government Printing Oce, Washington, DC 20402.)
(Single copies of this specification, and other federal specifications and commercial
item descriptions required by activities outside the Federal Government for bidding purposes
are available without charge from the General Services Administration, Federal Supply
Service Bureau, Specication Section, Suite 8100, 470 L’Enfant Plaza, SW, Washington, DC
20407.)
(Federal Government activities may obtain copies of federal standardization
documents and the Index of Federal Specifications, Standards and Commercial Item
Descriptions from established distribution points in their agencies or contact the DoD Lock
Program at: Comm. 1-800-290-7607, DSN 551-1212.)
Military Standards:
- -129 – Military Marking for Shipment and Storage MIL STD
- -810 – MIL STD Environmental Test Methods and Engineering Guidelines
- -889 – MIL STD Dissimilar Metals

Specyfikacje produktu

Marka: Dormakaba
Kategoria: nieskategoryzowany
Model: FF-L-2890B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dormakaba FF-L-2890B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Dormakaba

Dormakaba

Dormakaba Master Key Systems Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba CL700 Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba C500 Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba D800 Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba 9321 Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba 9320 Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba C100 Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba C200 Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba Keyscan Indala Instrukcja

31 Sierpnia 2024
Dormakaba

Dormakaba ED250 Instrukcja

31 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024