Instrukcja obsługi Dormakaba ES84

Dormakaba nieskategoryzowany ES84

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dormakaba ES84 (6 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

USA: DORMA DRIVE, DRAWER AC, REAMSTOWN, PA 17567 PHONE: (800) 523-8483 (717) 336-3881 FAX: (717) 336-2106

EMAIL: archdw@dorma-usa.com dorma-usa.com WEBSITE:

1. Determine the vertical centerline of the door lock face and

the horizontal centerline of the latch.

IMPORTANT: When determining the horizontal centerline

observe the following:

FOR MORTISE LOCKS: Align the angled ramps of the lip

bracket with the deadlock trigger of the mortise latch.

FOR CYLINDRICAL LOCKS: Align the center of the latch with

the center of the strike opening.**

2. Transfer both the horizontal and vertical centerlines to the

doorframe.**

3. Prepare the doorframe for cutting as shown in the

appropriate drawing.

4. If required, install the ‘no weld’ mounting tabs per page 4.

5. Attach the strike faceplate to the lip bracket with the self-

tapping screws provided. (It may be desirable to leave

these screws slightly loose to facilitate insertion into the

doorframe.

6. Connect the incoming wiring from the power supply (see

wiring instructions).

7. Install the door strike in the doorframe using the screws

provided.

Instructions

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/4 1.250 31.75

B 4-7/8 4.875 123.83

C 3-3/8 3.375 85.73

D 1-3/16 1.188 30.16

E 3/8 .375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 0.156 3.97

K 4-1/8 4.125 104.78

M 12-24 — —

Vertical Centerline

of Door**

Aluminum Frames 1-3/16”D

Modular ES86 FSV ES86 FSV LKM or or

ES86 U assembled with 86S4 faceplate

Aluminum Frames 1-1/16”D

Modular ES84 FSV ES84 FSV LKM or or

ES84 U assembled with 86S4 faceplate

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/4 1.250 31.75

B 4-7/8 4.875 123.83

C 3-3/8 3.375 85.73

D 1-3/32 1.094 27.78

E 3/8 .375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 0.156 3.97

K 4-1/8 4.125 104.78

M 12-24 — —

Vertical Centerline

of Door**

NOTE: Specifications subject to change without notice.

* Dimension F is measured from face of mounting tab to face of frame.

** Dimension X on the drawing is determined by the vertical centerline of the door. If the latch incorporates a deadlocking pin additional steps will be

necessary to ensure proper operation of the deadlocking pin. Measure the thickness of the deadlocking pin and add this thickness to Dimension X to

relocate the vertical centerline an appropriate distance on the frame.

ISES84/86

08281220

PCN14085

R09/15TG

The ES84/86 electric strikes include two profiles:

• TheES84(LowProfile)versionfeaturesa1-1/16”Dbody,accepts1/2”or5/8”latchprojection,andisdesignedfornarrowstile

(i.e., aluminum) frames.

• TheES86(StandardProfile)versionfeaturesa1-3/16”Dbodythataccepts3/4”latchprojection.

NOTE: Universal packaging (faceplate ‘U’) includes faceplate sizes 86S4, 86S4S, and 86S7.

Electric Strikes

I N S T A L L A T I O N

E S 8 4 / 8 6 S E r i E S

Aluminum & Wood Frames, 1-3/16” D

Modular ES86 FSV ES86 FSV LKM or assembled

with 86S6 faceplate

A 1-1/4 1.250 31.75

B 6-7/8 6.875 174.63

C 3-3/8 3.375 85.73

D 1-3/16 1.188 30.16

E 3/8 0.375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 .156 3.97

K 6-1/8 6.125 155.58

M 12-24† — —

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

Vertical Centerline

of Door**

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/8 1.125 28.58

B 5-7/8 5.875 149.23

C 3-3/8 3.375 85.73

D 1-3/16 1.188 30.16

E 1/4 0.250 6.35

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 .156 3.97

K 5-3/8 5.375 136.53

M 12-24

†

— —

Vertical Centerline

of Door**

Aluminum & Wood Frames, 1-1/16” D

Modular ES84 FSV ES84 FSV LKM or assembled

with 86S5 faceplate

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/8 1.125 28.58

B 5-7/8 5.875 149.23

C 3-3/8 3.375 85.73

D 1-3/32 1.094 27.78

E 1/4 0.250 6.35

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 .156 3.97

K 5-3/8 5.375 136.53

M 12-24† — —

Vertical Centerline

of Door**

Aluminum & Wood Frames, 1-1/16” D

Modular ES84 FSV ES84 FSV LKM or assembled

with 86S6 faceplate

A 1-1/4 1.250 31.75

B 6-7/8 6.875 174.63

C 3-3/8 3.375 85.73

D 1-3/32 1.094 27.78

E 3/8 0.375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 .156 3.97

K 6-1/8 6.125 155.58

M 12-24† — —

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

Vertical Centerline

of Door**

NOTE: Specifications subject to change without notice.

* Dimension F is measured from face of mounting tab to face of frame.

** Dimension X on the drawing is determined by the vertical centerline of the door. If the latch incorporates a deadlocking pin additional steps will be

necessary to ensure proper operation of the deadlocking pin. Measure the thickness of the deadlocking pin and add this thickness to Dimension X to

relocate the vertical centerline an appropriate distance on the frame.

† For wood frame door installations, substitute #12 wood screws for dimension M.

Aluminum & Wood Frames, 1-3/16” D

Modular ES86 FSV ES86 FSV LKM or assembled

with 86S5 faceplate

ES84/86 Series Installation Instructions (Continued)

Hollow Metal Frames, 1-3/16” D

Modular ES86 FSV ES86 FSV LKM or or

ES86 U assembled with 86S4S faceplate

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/4 1.250 31.75

B 4-7/8 4.875 123.83

C 3-3/8 3.375 85.73

D 1-3/16 1.188 30.16

E 3/8 .375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

K 4-1/8 4.125 104.78

M 12-24 — —

Vertical Centerline

of Door**

Hollow Metal Frames, 1-1/16” D

Modular ES84 FSV ES84 FSV LKM or or

ES84 U assembled with 86S4S faceplate

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/4 1.250 31.75

B 4-7/8 4.875 123.83

C 3-3/8 3.375 85.73

D 1-3/32 1.094 27.78

E 3/8 .375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

K 4-1/8 4.125 104.78

M 12-24 — —

Vertical Centerline

of Door**

Aluminum & Wood Frames, 1-3/16” D

Modular ES86 FSV ES86 FSV LKM or or

ES86 U 86S7 assembled with faceplate

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-7/16 1.438 36.51

B 7-15/16 7.938 201.61

C 3-3/8 3.375 85.73

D 1-3/16 1.188 30.16

E 1/4 0.250 6.35

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 .156 3.97

K 7-7/16 7.438 188.91

M 12-24† — —

Vertical Centerline

of Door**

Aluminum & Wood Frames, 1-1/16” D

Modular ES84 FSV ES84 FSV LKM or or

ES84 U assembled with 86S7 faceplate

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-7/16 1.438 36.51

B 7-15/16 7.938 201.61

C 3-3/8 3.375 85.73

D 1-3/32 1.094 27.78

E 1/4 0.250 6.35

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 .156 3.97

K 7-7/16 7.438 188.91

M 12-24† — —

Vertical Centerline

of Door**

NOTE: Specifications subject to change without notice.

* Dimension F is measured from face of mounting tab to face of frame.

** Dimension X on the drawing is determined by the vertical centerline of the door. If the latch incorporates a deadlocking pin additional steps will be