Instrukcja obsługi DJI Zenmuse P1

DJI Niesklasyfikowane Zenmuse P1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DJI Zenmuse P1 (28 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/28
2021.04
v1.2
User Manual
ZENMUSE P1
Searching for Keywords
Search for keywords such as “battery and “install” to find a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to
begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.
© 2021  DJI All Rights Reserved.
3
Using This Manual
Legends
Warning Important Hints and Tips Reference
Caution
1. When not in use, store the ZENMUSETM P1 in the storage case and replace the desiccant packet
as necessary to prevent fogging the lenses due to excessive ambient humidity. If the lenses fog up,
the water vapor will usually dissipate after powering on the device for a while. It is recommended to
store the P1 in an environment with a relative humidity of less than 40% and temperature of 20±5° C.
2. DO NOT place the product under direct sunlight, in areas with poor ventilation, or near a heat
source such as a heater.
3. DO NOT repeatedly power the product on or o. After powering o, wait at least 30 seconds before
powering back on. Otherwise, the product life will be aected.
4. Under stable laboratory conditions, the P1 achieves an IP4X protection rating by IEC60529
standards. The protection rating is not permanent, however, and may reduce over an extended
period.
5. Make sure there is no liquid on the surface or in the port of the gimbal.
6. Make sure the gimbal is securely installed on the aircraft and the SD card slot cover is closed
properly.
7. Make sure the surface of the gimbal is dry before opening the SD card slot cover.
8. DO NOT remove or insert the SD card when taking a photo or recording a video.
9. DO NOT touch the surface of the lens with your hand. Be careful to avoid scratching the surface of
the lens with sharp objects. Otherwise, the quality of images may be aected.
10. Clean the surface of the camera lens with a soft, dry, clean cloth. DO NOT use alkaline detergents.
11. DO NOT press the lens release button while attaching the lens. DO NOT repeatedly disassemble
and assemble the lens unless necessary.
12. DO NOT plug or unplug the lens after powering on.
13. DO NOT plug or unplug the P1 after powering on. Press the power button on the aircraft to power
o instead of removing the P1 directly from the aircraft.
14. Make sure to use a storage case when transporting the P1 as the gimbal is a precision instrument.


Specyfikacje produktu

Marka: DJI
Kategoria: Niesklasyfikowane
Model: Zenmuse P1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DJI Zenmuse P1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane DJI

DJI

DJI Avinox Drive System Instrukcja

9 Października 2024
DJI

DJI SDR Transmission Instrukcja

7 Października 2024
DJI

DJI RS 4 Instrukcja

5 Października 2024
DJI

DJI Dropsafe Instrukcja

30 Września 2024
DJI

DJI Osmo Pocket 3 Instrukcja

29 Września 2024
DJI

DJI Osmo Action 4 Instrukcja

26 Września 2024
DJI

DJI Zenmuse H20 Instrukcja

23 Września 2024
DJI

DJI Inspire 3 Instrukcja

11 Września 2024
DJI

DJI Zenmuse H4-3D Instrukcja

9 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane