Instrukcja obsługi Digital Watchdog MegaPix CaaS DWC-MB44WIAC2

Digital Watchdog Kamera monitorująca MegaPix CaaS DWC-MB44WIAC2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Digital Watchdog MegaPix CaaS DWC-MB44WIAC2 (2 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM 8:00PM EST, Monday through Friday
digital-watchdog.com
Attention: This document is intended to serve as a quick reference for initial set-up.
See the DW Spectrum® IPVMS full manual for more information on features and functionality.
Camera as a Server
SETTING UP A DW SPECTRUM® CAAS™ SERVER
STEP 1: Launch the DW Spectrum® IPVMS client on a computer running on the same network as the DW Spectrum® CaaS™
server. Please note that the client and all the ®DW Spectrum CaaS™ servers you are connecting to must be on the
same network. It is not recommended to try to merge ®DW Spectrum CaaS™ servers from dierent networks.
STEP 2: If the CaaS™ server is not showing in the tile, click on the “Connect to Another Server...” button at the bottom of the
screen.
STEP 3: Enter the DW Spectrum® CaaS™ server’s IP address, port (default is 7001), username and password (default are
admin | admin12345). You may test the connection to make sure you have entered the proper information, or click OK
to log into the DW Spectrum® CaaS™ server.
A. FINDING YOUR DW SPECTRUM® CAAS™ CAMERA/SERVER
NOTE: Before setting up your DW Spectrum® CaaS™ server for recording via the DW Spectrum® client software, write down
the camera/server’s IP address for identification and configuration.
To locate your camera/servers IP address:
1. Launch the DW IP Finder software on a computer located on the same network as the camera/server.
2. Click on the ‘Search’ button. The software will scan your network for all supported cameras and display the
results in the table. Allow up to 5 seconds for the IP Finder to find the camera on the network.
3. Locate your camera/server on the results list and write down its IP address.
NOTE: DW Spectru CaaS™ servers run Edge version and come with 1 DW Spectrum® Edge license.
STEP 2: Go to Recordings tab.
STEP 3: Click to turn on
recording.
STEP 4: Configure schedule settings for quality,
FPS and recording type.
STEP 5: Click and drag mouse over the recording
schedule to apply the settings to multiple
days and hours.
* Click on All to apply to the all schedules.
STEP 6: A red dot will appear next to the camera in the
resource tree when recording is started.
www.digital-watchdog.com
sales@dwcc.tv
Rev Date: 02/20
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Tel: +1 (866) 446-3595
Fax: (813) 888-9262
B. CONFIGURE RECORDING
STEP 1: Right-click on the ®DW Spectrum CaaS™ server from the
resource tree to set up recording, then click “Camera
Settings.
NOTE: For recording estimation and times, see DW’s IP
calculator. Go to www.digital-watchdog.com >
Support > Calculators
NOTE: NAS storage options are available for external
storage. Refer to the Blackjack® NAS QSG for
additional information on how to configure the
Blackjack® NAS storage with the DW Spectrum®
CaaS™ server.
NOTE: You can install up to 30 DW Spectrum® CaaS
servers on the same system/network. (DW
Spectrum 4.0 or higher).
Quick Start Guide

Specyfikacje produktu

Marka: Digital Watchdog
Kategoria: Kamera monitorująca
Model: MegaPix CaaS DWC-MB44WIAC2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Digital Watchdog MegaPix CaaS DWC-MB44WIAC2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kamera monitorująca Digital Watchdog

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca