Instrukcja obsługi DeWalt DW194


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DeWalt DW194 (17 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
DEWALT Industrial Tool Company, P.O. Box 158, 626 Hanover Pike, Hampstead, MD 21074 Printed in U.S.A. (JAN98-CD-1) Form No. 384957
DW194/DW194-220/DW195 Copyright © 1998
384957/Drill 5/2/02 1:05 PM Page 2
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTESADVERTENCIA:
DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW194, DW194-220, DW195
2-Speed Heavy Duty Drill
Perceuse à 2 vitesses de service intensif
Taladro con 2 velocidades para trabajo pesado
384957/Drill 5/2/02 1:05 PM Page 3
pull the plug from an outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock.
When operating a power tool outside, use an outdoor
extension cord markedW-Aor “W.” These cords are rated for
outdoor use and reduce the risk of electric shock. When using an
extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a drop
in line voltage resulting in loss of power and overheating. The
following table shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.
Minimum Gage for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
240V 0-50 51-100 101-200 201-300
Ampere Rating
More Not more AWG
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or medication. A moment
of inattention while operating power tools may result in serious
personal injury,
Dress properly. Do not wear loose clothing or jewelry. Contain
long hair. Keep your hair, clothing, and gloves away from
moving parts. Loose clothing, jewelry, or long hair can be caught
in moving parts.
Avoid accidental starting. Be sure switch is off before
plugging in. Carrying tools with your finger on the switch or
plugging in tools that have the switch on invites accidents.
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
General Safety Rules for All Tools
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Grounded tools must be plugged into an outlet properly
installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify the
plug in any way. Do not use any adapter plugs. Check with a
qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry
electricity away from the user.
Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
Don’t expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord to carry the tools or
384957/Drill 5/2/02 1:05 PM Page 4


Specyfikacje produktu

Marka: DeWalt
Kategoria: Wiertarka
Model: DW194

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DeWalt DW194, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wiertarka DeWalt

DeWalt

DeWalt dc987ka Instrukcja

15 Stycznia 2025
DeWalt

DeWalt DCB126 Instrukcja

5 Stycznia 2025
DeWalt

DeWalt DCD1624 Instrukcja

3 Stycznia 2025
DeWalt

DeWalt DW9106 Instrukcja

30 Grudnia 2025
DeWalt

DeWalt D25003 Instrukcja

23 Grudnia 2024
DeWalt

DeWalt DWD450 Instrukcja

14 Października 2024
DeWalt

DeWalt DCH033 Instrukcja

9 Października 2024
DeWalt

DeWalt DWD216G Instrukcja

8 Października 2024
DeWalt

DeWalt DCD445 Instrukcja

8 Października 2024
DeWalt

DeWalt DW235G Instrukcja

8 Października 2024

Instrukcje Wiertarka

Najnowsze instrukcje dla Wiertarka

Makita

Makita HR2631FTX4 Instrukcja

12 Stycznia 2025
Bavaria

Bavaria BCD 12/1 Instrukcja

11 Stycznia 2025
MSW

MSW -DDM255 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM152 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM205 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM230 Instrukcja

10 Stycznia 2025