Instrukcja obsługi Denon DN-280

Denon odbiornik DN-280

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Denon DN-280 (28 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/28
User Guide English (2–6)
Guía del usuario Español (7–11)
Guide d’utilisation Français (12–16)
Guida per l’uso Italiano (17–21)
Benutzerhandbuch Deutsch (22–26)
Appendix English (27)
2
User Guide ( )English
Introduction
Thank you for purchasing the DN-280. At Denon Professional, performance and reliability mean as
much to us as they do to you. Thats why we design our equipment with only one thing in mind—to
make your performance the best it can be.
Box Contents
DN-280
IEC Power Cable
Rack Mount Ears & Screws
Rubber Feet
Euroblock Connector
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit denonpro.com.
For additional product support, visit denonpro.com/support.
3
Features
Front Panel
1
2
3
4
5
6
7
8
1. Power Switch: Press this switch to power DN-280 on or off. Make sure the Master knob is all
the way down before powering on. The power LED will turn on when DN-280 is powered on.
2. Master: Turn this knob to control the volume level of the audio signal sent to
DN-280’s Speaker Output.
3. Signal/Clip/Protection LEDs: These lights show the signal status of the Channel Input:
Signal LED (SIG): The Signal LED will be lit green when the signal coming from the Channel
Input is at an optimal volume level.
Clip LED (CLIP): When the Clip LED is lit red, the Channel Input’s signal is peaking” (higher
than 0 dB). To prevent the “clipping” (distortion) that can result from a loud input signal, turn the
Master knob counter-clockwise or reduce the volume on the device plugged into the Channel
Input.
Protection LED (PROT): If the Protection LED turns red, DN-280 is in heat protection mode
and will not output sound. To restore sound output, reduce DN-280’s temperature by making
sure there is good ventilation and/or decreasing the volume.
4. Speaker Bass: Turn this knob to control the level of the low (bass) frequencies sent from DN-
280’s Speaker Output.
5. Speaker Treble: Turn this knob to control the level of the high (treble) frequencies sent from DN-
280’s Speaker Output.
6. Aux Input: Connect an audio device to this input using a standard 1/8” (3.5 mm) stereo/TRS
cable.
Note: The Aux Input and rear panel Channel Input cannot be used at the same time. The
Channel Input will be disabled when a device is plugged into the Aux Input.
7. Mic Gain: Turn this knob to control the volume level of the Mic/Line Input.
8. Mic/Line Input: Connect a microphone or line-level device to this input using a standard XLR or
1/4” (6.35 mm) TRS cable. Turn the Mic Gain knob to control the volume level of this input.
Note: This input includes a ducking feature, which automatically reduces the gain of the Aux
Input and Channel Input by 20 dB when the microphone is in use at the same time (such as
when paging). After 2.5 seconds without input from the microphone, the Aux Input and Channel
Input gain will return to their set levels.


Specyfikacje produktu

Marka: Denon
Kategoria: odbiornik
Model: DN-280

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Denon DN-280, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Denon

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Denon

Denon AVR-991 Instrukcja

10 Października 2024
Denon

Denon AVR-4810 Instrukcja

10 Października 2024
Denon

Denon PMA-3000NE Instrukcja

8 Października 2024
Denon

Denon AVR-X2300W Instrukcja

7 Października 2024
Denon

Denon AVR-1700 Instrukcja

2 Października 2024
Denon

Denon DRA-900H Instrukcja

27 Września 2024
Denon

Denon AVR-S670H Instrukcja

27 Września 2024
Denon

Denon AVR-X3600H Instrukcja

23 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik