Instrukcja obsługi Dell S2216M

Dell monitor S2216M

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dell S2216M (45 stron) w kategorii monitor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/45
Model No.: S2216M/S2316M
Regulatory model: S2216Mc/S2316Mc
User’s Guide
Dell S2216M/S2316M
Notes, Cautions, and Warnings
A NOTE indicates important information that helps you make better NOTE:
use of your computer.
A CAUTION indicates potential damage to hardware or loss of CAUTION:
data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury or death.
_________________________
Information in this document is subject to change without notice.
© 2015 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission
of Dell Inc. is strictly forbidden.
Trademarks used in this text: and the logo are trademarks of Dell Inc.; Dell DELL Microsoft
and are either trademarks or registered trademarks of Microsoft. Corporation in Windows
the United States and/or other countries, is a registered trademark of Intel Corporation Intel
in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc.
ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an
ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR
guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary
interest in trademarks and trade names other than its own.
2015 - 07 Rev. A00
Contents | 3
Contents
About Your Monitor 5 ................................................................
Package Contents 5 ......................................................................................
Product Features ........................................................................................6
Identifying Parts and Controls ................................................................. 7
Plug and Play Capability ..........................................................................10
LCD Monitor Quality and Pixel Policy .................................................. 10
Maintenance Guidelines .........................................................................10
Setting Up the Monitor 11 .........................................................
Connecting the Stand 11 .............................................................................
Connecting Your Monitor ......................................................................12
Organizing Cables ....................................................................................13
Removing the Monitor Stand .................................................................13
Operating your Monitor 14 .......................................................
Power On the Monitor 14 ............................................................................
Using the Front Panel Controls ............................................................. 14
Using the On-Screen Display (OSD) Menu .........................................16
4 | Contents
Setting the Maximum Resolution 28 ..........................................................
Using the Tilt .............................................................................................29
Troubleshooting 30 ....................................................................
Self-Test 30 ....................................................................................................
Built-in Diagnostics .................................................................................. 31
Common Problems .................................................................................32
Product-Specific Problems ....................................................................34
Appendix ....................................................................................................35
FCC Notices (U.S. Only) and Other Regulatory Information ..........35
Contact Dell ..............................................................................................35
Setting Up Your Monitor .........................................................................36
Monitor Specifications 38 .........................................................
About Your Monitor | 5
About Your Monitor
Package Contents
Your monitor ships with the components shown below. Ensure that you have
received all the components and if something is missing.Contact Dell
Some items may be optional and may not ship with your monitor. Some NOTE:
features or media may not be available in certain countries.
To set up with any other stand, please refer to the respective stand setup NOTE:
guide for setup instructions.
Monitor
Stand riser
Stand base
Power Adapter
Power cable (varies by
countries)
6 | About Your Monitor
VGA Cable
DellTM UltraS harp U27 15H Mo nito r
Drivers and
Documentation Media
Quick Setup Guide
Safety and Regulatory
Information
Product Features
The flat panel display has an active matrix, Thin-Film Transistor Dell S2216M_S2316M
(TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor features include:
S2216M: 54.61 cm (21.5 inch) viewable area display (measured diagonally). 1920
x 1080 resolution, plus full-screen support for lower resolutions.
S2316M: 58.42 cm (23 inch) viewable area display (measured diagonally). 1920 x
1080 resolution, plus full-screen support for lower resolutions.
Wide viewing angle to allow viewing from a sitting or standing position, or while
moving from side-to-side.
Plug and play capability if supported by your system.
On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
Software and documentation media includes an Information File (INF), Image
Color Matching File (ICM), and product documentation.
Dell Display Manager Software included (in the CD shipped with the monitor).
Energy Saver feature for Energy Star compliance.
Security - lock slot.
Capability to switch from wide aspect to standard aspect ratio while maintaining
the image quality.
EPEAT Silver Rating.
TCO-Certified Displays.
BFR/PVC- Reduced.
High Dynamic Contrast Ratio (8,000,000:1).
0.3 W standby power when in the sleep mode.
Energy Gauge shows the energy level being consumed by the monitor in real
time.
About Your Monitor | 7
Identifying Parts and Controls
Front View
Front panel controls
2
1
Label Description
1Function buttons (For more information, see )Operating your Monitor
2Power On/Off button (with LED indicator)
For displays with glossy bezels the user should consider the placement of NOTE:
the display as the bezel may cause disturbing reflections from surrounding light
and bright surfaces.
8 | About Your Monitor
Back View
4
5
1
2
3
Back View with monitor standBack View without monitor stand
Label Description Use
1Stand release button Releases stand from monitor.
2Security - lock slot Secures monitor with security lock
(security lock not included).
3Barcode serial number label Refer to this label if you need to
contact Dell for technical support.
4Cable management slot Uses to organize cables by placing
them through the slot.
5Regulatory label Lists the regulatory approvals.
About Your Monitor | 9
Side View
Bottom View
2 31
Bottom view without monitor stand
Label Description Use
1Power-adapter port To connect the monitor power cable using a
12V DC adapter for transition.
2DVI(HDCP) port To connect your computer to the monitor us-
ing a DVI cable.
3VGA port To connect your computer to the monitor using
a VGA cable.
10 | About Your Monitor
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor
automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so the system can configure
itself and optimize the monitor settings. Most monitor installations are automatic,
you can select different settings if desired. For more information about changing the
monitor settings, see .Operating your Monitor
LCD Monitor Quality and Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more
pixels to become fixed in an unchanging state which are hard to see and do not affect
the display quality or usability. For more information on Dell Monitor Quality and Pixel
Policy, see Dell Support site at: .www.dell.com/support/monitors
Maintenance Guidelines
Cleaning Your Monitor
WARNING: Before cleaning the monitor, unplug the monitor power cable from
the electrical outlet.
CAUTION: Read and follow the Safety Instructions before cleaning the monitor.
For best practices, follow the instructions in the list below while unpacking, cleaning
or handling your monitor:
To clean your anti-static screen, lightly dampen a soft, clean cloth with water.
If possible, use a special screen-cleaning tissue or solution suitable for the anti-
static coating. Do not use benzene, thinner, ammonia, abrasive cleaners or
compressed air.
Use a lightly-dampened, warm cloth to clean the monitor. Avoid using
detergent of any kind as some detergents leave a milky film on the monitor.
If you notice white powder when you unpack your monitor, wipe it off with a
cloth.
Handle your monitor with care as a darker-colored monitor may get scratched
and show white scuff marks more than a lighter-colored monitor.
To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and turn Off your monitor when not in use.
Setting Up the Monitor | 11
Setting Up the Monitor
Connecting the Stand
The stand is detached when the monitor is shipped from the factory.NOTE:
The following steps is applicable for a monitor with a stand.NOTE:
2
3
To attach the monitor stand:
1. Remove the cover and place the monitor on it.
2. Fit the two tabs on the upper part of the stand to the groove on the back of the
monitor.
3. Press the stand till it snaps into place.
12 | Setting Up the Monitor
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions.
Do not connect all cables to the computer at the same time.NOTE:
To connect your monitor to the computer:
1. Turn Off your computer and disconnect the power cable.
2. Connect either the white (digital DVI) or the blue (analog VGA) display connector
cable to the corresponding video port on the back of your computer. Do not use
both cables on the same at the same time. Use both the cables only when they
are connected to two different computers with appropriate video systems.
Connecting the VGA cable
Connecting the DVI cable Optional Purchase( )
Setting Up the Monitor | 13
Organizing Cables
After you connect all necessary cables to your monitor and computer, organize all
cables as shown above.
NOTE: After the cables are connected, they will have to be disconnected again
to route them through the hole.
Removing the Monitor Stand
NOTE: To prevent scratches on the LCD screen while removing the stand,
ensure that the monitor is placed on a soft and clean surface.
NOTE: The following steps is applicable for a monitor with a stand.
2
3
22
3
2
2
move the stand:To re
1. Place the monitor on a soft cloth or cushion.
2. Use a long and thin screwdriver to push the release latch.
3. Once the latch is released, remove the base away from monitor.
14 | Operating your Monitor
Operating your Monitor
Power On the Monitor
Press the button to turn On the monitor.
Using the Front Panel Controls
Use the control buttons on the front of the monitor to adjust the image being
displayed.
5
123 4
The following table describes the front panel buttons:
Front Panel Button Description
1
Shortcut key/Preset Modes
Use this button to choose from a list of preset
modes.
2
Shortcut key/Brightness/
Contrast
Use this button to directly access the Brightness/
Contrast menu.
3
Menu
Use the MENU button to launch the On-Screen
Display (OSD) and select the OSD Menu. See
Accessing the OSD menu.
4
Exit
Use this button to go back to the main menu or
exit the OSD main menu.
Operating your Monitor | 15
5
Power On/Off button (with
LED indicator)
Use the button to turn the monitor Power On
and .Off
Solid white light indicates the monitor is On and
fully functional. Blinking white light indicates the
power save mode.
OSD controls
Use the buttons on the front of the monitor to adjust the image settings.
1 42 3
Front Panel Button Description
1
Up
Use the Up button to increase values or move up.
2
Down
Use the button to adjust (decrease ranges) Down
items in the OSD menu.
3
OK
Use the button to confirm your selection.OK
4
Back
Use the button to go back to the previous menu.Back
16 | Operating your Monitor
Using the On-Screen Display (OSD) Menu
Accessing the OSD menu
NOTE: If you change the settings and then either proceed to another menu or
exit the OSD menu, the monitor automatically saves those changes. The changes
are also saved if you change the settings and then wait for the OSD menu to
disappear.
1. Press the button to display the OSD main menu.
Main Menu for analog (VGA) input
Brightness st/ Contra
Au Adto just
Input Source
Color
Display
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
X16M eDell S2 Energy Us
75% 75%
2. Press the and buttons to move between the setting options. As you move
from one icon to another, the option name is highlighted. See the following
table for a complete list of all the options available for the monitor.
3. Press the button once to activate the highlighted option.
4. Press and button to select the desired parameter.
5. Press and then use the and buttons, according to the indicators on
the menu, to make your changes.
6. Select the button to return to the main menu.
18 | Operating your Monitor
Auto Adjust Use this key to activate automatic setup and adjust menu.
Brightness / Contrast
Input Source
Color
Display
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Dell S2X16M Energy Use
Press to adjust the screen automatically.
Auto Adjust
The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjustment in Progress...
Auto Adjustment allows the monitor to self-adjust to the
incoming video signal. After using Auto Adjustment, you
can further tune your monitor by using the Pixel Clock
(Coarse) and Phase (Fine) controls under Display Settings.
NOTE: Auto Adjust does not occur if you press the
button while there are no active video input signals or
attached cables.
This option is only available when you are using the
analog (VGA) connector.


Specyfikacje produktu

Marka: Dell
Kategoria: monitor
Model: S2216M

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dell S2216M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor Dell

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer VG281K Instrukcja

15 Stycznia 2025
Acer

Acer V223W Instrukcja

15 Stycznia 2025
Orion

Orion R4N55RNF Instrukcja

15 Stycznia 2025
Orion

Orion 23REDPH Instrukcja

15 Stycznia 2025
Orion

Orion R4N46UNF Instrukcja

15 Stycznia 2025
Orion

Orion 21REDPH Instrukcja

15 Stycznia 2025
BenQ

BenQ G2750HM Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM27JF-VDR Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM24JF-VDR Instrukcja

14 Stycznia 2025