Instrukcja obsługi Dell Latitude E6410

Dell laptop Latitude E6410

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dell Latitude E6410 (52 stron) w kategorii laptop. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/52
Dell™Latitude™E6410/E6410ATGServiceManual
Notes, Cautions, and Warnings
IfyoupurchasedaDell™nSeriescomputer,anyreferencesinthisdocumenttoMicrosoft®Windows®operating systems are not applicable.
Information in this document is subject to change without notice.
©2010DellInc.Allrightsreserved.
Reproduction of this material in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Latitude ON, and Latitude are trademarks of Dell Inc.; Intel, Pentium, Celeron, Intel SpeedStep, Intel TurboBoost, and Core are either
trademarks or registered trademarks of Intel Corporation; Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; Microsoft, Windows,
Windows Vista, and the Windows Vista start button are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries; Adobe, the
Adobe logo, and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries; ATI FirePro is a trademark of
Advanced Micro Devices, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
June2010Rev.A00
Working on Your Computer
Removing and Replacing Parts
Specifications
Diagnostics
System Setup


NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Back to Contents Page
System Setup
Dell™Latitude™E6410/E6410ATGServiceManual
Entering System Setup
Boot Menu
Navigation Keystrokes
System Setup Menu Options
Your computer offers the following BIOS and System Setup options:
l Access System Setup by pressing <F2>
l Bring up a one-time boot menu by pressing <F12>
l Access the Intel®AMT settings by pressing <Ctrl> + <P>
Entering System Setup
Press <F2> to enter System Setup and make changes to user-definable settings. If you have trouble entering System Setup using this key, press <F2> when
the keyboard lights first flash.
Boot Menu
Press <F12> when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for the computer. Diagnostics and Enter Setup
options are also included in this menu. The devices listed on the boot menu depend on the bootable devices installed in the computer. This menu is useful
when you are attempting to boot to a particular device or to bring up the diagnostics for the computer. Using the boot menu does not make any changes to
the boot order stored in the BIOS.
Navigation Keystrokes
Use the following keystrokes to navigate System Setup screens.
System Setup Menu Options
The following tables describe the menu options for the System Setup program.
Action
Keystroke(s)
Exit BIOS
<Esc> or click Exit
Apply a setting
click Apply
Reset defaults
click Load Defaults
Expand and collapse field
<Enter>
Option
Description
System Information
This section lists the primary hardware features of your computer. There are no configurable options in this section.
l System Information
l Memory Information
l Processor Information
l Device Information
Battery Information
Displays the status of the battery and the type of AC adapter connected to the computer.
Boot Sequence
Specify the order in which the computer attempts to find an operating system.
l Diskette drive
l Internal HDD (IRRT)
l USB Storage Device
l CD/DVD/CD- RW Drive
l Onboard NIC
l Cardbus NIC
Also allows you to choose the Boot list Option. The options are: Legacy and UEFI
Date/Time
Displays current date and time settings.
NOTE: System Configuration contains options and settings related to integrated system devices. Depending on your computer and installed devices, the
items listed in this section may or may not appear.
Option
Description
Integrated NIC
Allows you to configure the integrated network controller. The options are: Disabled, Enabled, and Enabled w/PXE
Default Setting: Enabled w/PXE
Allows you to configure the parallel port on the docking station. The options are: Disabled, , AT PS2, and ECP
Parallel Port
Default Setting: ECP
Serial Port
Allows you to configure the integrated serial port. The options are: Disabled, , , COM1 COM2 COM3, and COM4
Default Setting: COM1
SATA Operation
Allows you to configure the internal SATA hard drive controller. The options are: Disabled, , ATA AHCI, and RAID On
Default Setting: RAID On
Miscellaneous Devices
Allows you to enable or disable the following devices:
l Internal Modem
l Module Bay
l ExpressCard or PC Card
l Media Card, PC Card and 1394
l External USB Port
l Microphone
l eSATA Ports
l Hard Drive Free Fall Protection
l Camera and Microphone
Default setting: All enabled.
LatitudeON™Reader
Allows you to configure the operating mode of the Latitude ON Reader. The options are: Disabled and Enabled
Default Setting: Enabled
Keyboard Illumination
Allows you to configure the keyboard illumination feature. The options are: Disabled, Auto ALS and Input, and Auto Input
Only
Default Settings: Disabled
Option
Description
Ambient Light Sensor
To enable the Ambient Light Sensor, select the Ambient Light Sensor check box.
Default Settings: Disabled
LCD Brightness
Allowsyoutosetthedisplaybrightnessdependinguponthepowersource(On Battery and On AC).
Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password. When set, the admin password enables several
security features including:
l Restricts changes to the settings in Setup
l Restricts the boot devices listed in the <F12> Boot Menu to those enabled in the "Boot Sequence" field
l Prohibits changes to the owner and asset tags
l Substitutes for the system and hard drive password
NOTE: You must set the admin password before you set the system or hard drive password.
NOTE: Successful password changes take effect immediately.
NOTE: Deleting the admin password automatically deletes the system password as well.
Default Setting: Not Set
System Password
Allows you to set, change, or delete the system password. When set, your computer requests you to enter the system
password every time your computer turns on or restarts.
NOTE: Successful password changes take effect immediately.
Default Setting: Not Set
Internal HDD Password
This field lets you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes take
place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is protected even
when installed in another system.
Default Setting: Not Set
Password Bypass
Allows you to bypass the system and internal hard drive password prompts when your computer restarts or resumes from
standby.
You can set Password Bypass to Disabled and Reboot Bypass.
NOTE: You cannot bypass the system or hard drive password when you turn on your computer that has been shut down.
Default Setting: Disabled
Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set.
Default Setting: Allow Non-Admin Password Changes checked
Strong Password
Allows you to enable of disable option to enforce strong passwords. If enabled, all passwords set on the computer must
contain at least one uppercase character, one lowercase character and be at least 8 characters long. Enabling this feature
automatically changes the default minimum password length to 8 characters.
Default Setting: Disabled
Allows you to enable or disable the Trusted Platform Module (TPM) on the computer.
NOTE: Disabling this option does not change any settings you may have made to the TPM, or delete any information or keys
you may have stored there.


Specyfikacje produktu

Marka: Dell
Kategoria: laptop
Model: Latitude E6410

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dell Latitude E6410, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje laptop Dell

Instrukcje laptop

Najnowsze instrukcje dla laptop

MSI

MSI GL75 Leopard Instrukcja

13 Stycznia 2025
MSI

MSI CR720 Instrukcja

12 Stycznia 2025
HP

HP G62-a10EO Instrukcja

12 Stycznia 2025
Alienware

Alienware x14 R2 Instrukcja

12 Stycznia 2025
Asus

Asus X101 Instrukcja

12 Stycznia 2025
ECS

ECS H41IA1 Instrukcja

11 Stycznia 2025
HP

HP G62-a57SG Instrukcja

11 Stycznia 2025