Instrukcja obsługi Definitive Technology IW Sub 10/10

Definitive Technology głośnik IW Sub 10/10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Definitive Technology IW Sub 10/10 (14 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
GET READY TO ROCK YOUR HOUSE!
Congratulations on your purchase of the remarkable
Definitive Technology in-wall subwoofer IWSub 10/10
and its matching Definitive Technology SubAmp 600.
This extraordinary In-Wall Subwoofer incorporates
Definitive Technology’s exclusive and effective
SuperCube™technology for spectacular bass perfor-
mance, the kind of musically accurate low end that’s
never before been available in a compact, nearly invisible
in-wall subwoofer. The IWSub 10/10 is specifically
designed to be powered by the matching Definitive
Technology SubAmp 600, which features two discrete
high power amplifiers to provide optimal power when
driving one or two IWSubs in your installation, whether
it is for whole-house distributed audio or dedicated music
or home theater applications.
IWSub 10/10™
&SubAmp 600
Ultra High-Performance In-Wall Subwoofer
and Separate Amplifier Module
Owner’s Manual
CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back
plate of this device. There are no user serviceable parts inside. Please refer all servicing to
licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert
the user to uninsulated “dangerous voltage” within the device’s enclosure. The international
symbol of an exclamation point inside a triangle is intended to alert the user to the presence
of important operating, maintenance and servicing information in the manual accompanying
the device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain
or moisture.
1. Read Instructions—All safety and operating instructions should be read before operating the device.
2. Retain Instructions—The safety and operating instructions should be retained for future reference.
3. Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.
4. Follow Instructions—All operating and safety instructions should be followed.
5. Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.
6. Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.
7. Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended
by the manufacturer.
8. Ventilation—The device should always be located in such a way that it maintains proper ventilation. It
should never be placed in a built-in installation or anywhere that may impede the flow of air through its
heat sink.
9. Heat—Never locate the device near heat sources such as radiators, floor registers, stoves or other
heat-generating devices.
10. Power Supply—The device should only be connected to a power supply of the type described in the
operating instructions or as marked on the device.
11. Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or
crushed by items placed on them or against them. Special attention should be paid to areas where the
plug enters a socket or fused strip and where the cord exits the device.
12. Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.
13. Periods Of Non-Use—The device should be unplugged when not being used for extended periods.
14. Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside
the device.
15. Damage Requiring Service—The device should be serviced by licensed technicians when:
• The plug or power supply cord has been damaged.
• Objects have fallen or liquid spilled inside of the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits a marked change in performance.
• The device has been dropped or the cabinet becomes damaged.
16. Service—The device should always be serviced by licensed technicians. Only replacement parts
specified by the manufacturer should be used. The use of unauthorized substitutions may result in
fire, shock, or other hazards.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2
•Unpacking Your IWSub 10/10 and SubAmp 600
• Please inspect your new equipment carefully. Notify your Definitive
Technology dealer immediately if you notice any damage or missing items.
• Record the serial numbers of your new equipment (usually found on the
rear panels). Note this information in the appropriate place on your Warranty
Card. Mail in your Warranty Card within 10 days of purchase.
• Keep the cartons and packing material. They will do the best job of
protecting your speakers if they need to be transported.
Important Note Concerning In-Wall Installation
The IWSub 10/10 is designed to be installed inside the walls of your home
quickly and easily. Because of its superb sonic performance, its installation
location within your room is very flexible. But your room is not like anyone
else’s room, and because of its unique size and shape will have its own require-
ments for optimal sonic performance. We recommend that you consult with the
Custom Installation Specialist at your Definitive Technology dealer regarding
your special needs or if you are at all uncertain about the best and safest way
to install your subwoofer.
• Before starting construction or modification of your walls or ceilings, you
should familiarize yourself with any applicable local fire and building codes.
• Speaker wire must be run inside your wall as part of the installation process
of in-wall loudspeakers. Plan the connection before you start your loud-
speaker installation.
• Make sure the locations you select do not conceal studs, electrical wiring or
plumbing. Prior to installation, hold the speaker in your chosen location to
make sure it safely clears obstacles such as studs, corners, beams, lighting
fixtures and door/window frames. Your cutout must be at least 1" (25mm)
from adjoining walls or ceiling, internal studs or plumbing, and a minimum
of 5" above the floor or 1" above the top of the baseboard (whichever is
higher). Note that the frame around the inset loudspeaker extends 1" beyond
your cutout.
• It is highly recommended that you take advantage of the expertise
of a professional installation specialist.
3

Specyfikacje produktu

Marka: Definitive Technology
Kategoria: głośnik
Model: IW Sub 10/10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Definitive Technology IW Sub 10/10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Definitive Technology

Definitive Technology

Definitive Technology Dymension DW-45 MAX Instrukcja

8 Października 2024
Definitive Technology

Definitive Technology Dymension DW-65 MAX Instrukcja

8 Października 2024
Definitive Technology

Definitive Technology Dymension DW-65 PRO Instrukcja

8 Października 2024
Definitive Technology

Definitive Technology Dymension DC-80 MAX SUR Instrukcja

8 Października 2024
Definitive Technology

Definitive Technology Mythos LCR-75 Instrukcja

7 Października 2024
Definitive Technology

Definitive Technology Mythos LCR-85 Instrukcja

7 Października 2024
Definitive Technology

Definitive Technology Mythos LCR-65 Instrukcja

5 Października 2024
Definitive Technology

Definitive Technology Mythos ST Instrukcja

3 Października 2024
Definitive Technology

Definitive Technology ProCinema 1000 Instrukcja

22 Września 2024
Definitive Technology

Definitive Technology BPVX Instrukcja

21 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024