Instrukcja obsługi Definitive Technology Disappearing DI 5.5LCR

Definitive Technology głośnik Disappearing DI 5.5LCR

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Definitive Technology Disappearing DI 5.5LCR (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

Unpacking Your Disappearing In-Wall Speakers

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed

damage most likely occur ed in handling after it left our plant and should be rr eported

at once to your Definitive dealer or the deliver company that delivered your loudy -

speaker. Please unpack your system carefully. Save all cartons and packing materials

in case you move or need to ship your system. Recor the serial number found on d

the back of the speakers and on the carton in this manual and save it for future

reference should your speaker need service. For your best protection, register your DI

Series products on-line at http://www.definitivetech.com/Registration/.

Definitive Technology

DI LCR

OWNER’S MANUAL

Thank You

Thank you for choosing Definitive Technology Disappearing In-Wall Loudspeakers.

The DI Series products offer extraordinary sound quality from speakers that are

barely visible when installed in a wall or ceiling. Our engineers spent many

years developing this product. In order to ensure that you experience the finest

performance possible, we encourage you to take a moment to fully read this

owner’s manual and familiarize yourself with the proper installation and set-up

procedures for your DI Series speaker.

5.5LCR

15-5/16" (38.9cm)

7-3/8" (18.7cm)

14-3/8" (36.4cm)

6-7/16" (16.4cm)

3-5/8" (9.3cm)

3-1/8" (7.27cm)

2@5-1/4" (13.3cm)

1@1"(25mm)

8 lbs (3.6Kg)

28Hz - 30kHz

89dB

4-8 Ohms

10 -250 WPC

Grille Length

Grille Width

Cutout Width

Cutout Length

Total Depth *

Mounting Depth In-Wall **

Woofer

Tweeter

Product Weight

Frequency Response

Sensitivity

Impedance

Recommended Amp Power

* From back of mounting flange to deepest part of product

** Total depth when product installed in 1/2" thick material (12.7 mm)

Specifications

6.5LCR

17-1/8" (43.5cm)

8-5/16" (21.0cm)

16-3/16" (41.0cm)

7-5/16" (18.6cm)

3-5/8" (9.3cm)

3-1/8" (7.27cm)

2@6-1/2" (16.5cm)

1@1"(25mm)

8.5 lbs (3.9Kg)

26Hz - 30kHz

90dB

4-8 Ohms

10 - 275 WPC

6.5LCR

5.5LCR

Painting DI LCR Speakers

Your DI Series speakers may be painted to match the color of the wall

or ceiling in which they are installed. Failure to follow the following

painting instructions may result in seriously degraded sound quality.

It is your responsibility to make sure your painting contractor sees and

follows these instructions.

1. DO NOT PAINT THE GRILLE WITH A BRUSH OR ROLLER —

they will clog the fine mesh of the grille and cloth scrim and result

in poor sound quality.

2. Remove the grille from the speaker and place it on a drop cloth,

newspaper or plastic sheet.

3. The grille MUST be spray painted with one of the following:

• Spray paint that closely matches the desired finish/color

• A custom spray bomb color matched to your paint finish

• Indoor latex paint using a spray gun (paint must be diluted

to the paint manufacturer’s specifications)

4. Do not remove the backing cloth (scrim).

5. Paint should be applied in a series of thin coats sprayed at

approximately 60 degr from the grille surface, allowing each ees

coat to fully cur applying additional coats.e before

6. To ensure that the paint distribution is evenly applied, each coat

should be applied from at least 4 dif ent directions to the grille. fer

(N, S, E & W) This will ensure an even coverage on the grille.

7. Once the grille has been painted and the paint has fully cured, you

may use a brush or small roller to touch-up the outer edge of the

grille frame — being VER eful not to get any additional paint Y car

on the grille mesh surface.

Placement Options

Definitive Technology DI Series Loudspeakers give you nearly endless

placement options. But remember that placement choice for your in-wall

speakers bears careful consideration, as installation requires that you cut a

hole in your wall or ceiling. It is best to keep the speakers at least 2 feet

(60 cm) from side walls [Figure 1]. When using DI Series models in home

theater applications follow the guidelines illustrated in Figures 2 and 3.

Orient the left and right speakers so that the tweeters are on the outside

edge as shown in Figur 2. Definitive DI Series In-Wall Loudspeakers have e

aimable tweeters that allow you to focus their sound toward or away from

your listening area depending on the application (see page 6).

Definitive Technology

1 – 12 inches

(2.5 – 31cm)

1 – 3 inches

( 25 – 75mm)

Figure 3

Figure 2

Figure 1

DI LCR

OWNER’S MANUAL

Installation

Installation Cautions

Installation of Disappearing Series Loudspeakers requires skills in using

tools such as a drill, screwdriver, saws and power tools. Installation also

entails running wires through walls. You should have a thorough under-

standing of local building and fire codes and a familiarity with the area

behind the wall or ceiling into which you plan to install your speakers.

When cutting holes in and running wires through walls/ceilings, you

run the risk of cutting electrical wires or water pipes, thereby causing

safety hazards and property damage. If you are in any doubt that you

possess the necessary skills or tools, contact your Definitive Technology

dealer, general contractor or a professional installer.

Required Tools

• Pencil for marking the location of installation.

• Bubble level

• Keyhole saw, utility knife or material- appropriate incising implement

for cutting drywall or other wall material.

• Phillips head screwdriver.

• Power drill with appropriate bit (optional, for starting wall cut).

Installation Procedure

You must first install speaker wires that meet appropriate building and fire

codes befor installing the speakers. Use at least 18 gauge wir or heavier toe e

ensure optimum sound quality.

• eMake sur the material into which you plan to mount the speakers

(plaster, drywall, paneling, stone, etc.) can support the weight of the

speakers (see specification page for the weight of your model).

• Make sure the locations you select do not conceal studs, electrical wiring

or plumbing. Prior to installation, hold the speaker with grille on in your

chosen location to make sur it safely clears obstacles such as studs, e

corners, beams, lighting fixtures and door/window frames. Your cutout

must be at least 2" (50 mm) from adjoining walls or ceiling, internal studs

or plumbing.

• NOTE: The DI 5.5LCR will fit between studs when used horizontally but

only if it is perfectly centered between the studs. Plan the placement of

your on-wall TV and speakers ver carefully before cutting holes. The DIy

6.5LCR will not fit between standard-spaced wall studs when used in a

horizontal orientation. If you wish to use a DI 6.5 as a horizontal centerLCR

channel speaker or if you cannot center a DI 5.5 between studs, consultLCR

a professional installer.

• Using the supplied template, trace the installation location with a

pencil. You can do this by holding the template in your preferred

location and tracing around it. Use a bubble level to square and level

the template [Figure 4].

• Carefully cut the hole with the appropriate cutting tool for your wall

or ceiling material. Start the hole by drilling a hole on the inside of the

tracing (with the drill bit just inside the line). Use this hole to insert the

saw or knife and begin cutting [Figure 5].

• eOnce you have cut the hole, pull the speaker wir out of the hole and

connect the speaker. Strip 1/2" inch (12 mm) of insulation from each of

the two conductors of the wire to expose the bare metal and twist each

of the conductors into a single unfrayed strand. Note that one of the

terminals on the rear of each speaker is marked red (+) and the other

black (-). Make certain that you connect the wir from the red terminale

(+) of your amplifier or receiver to the red terminal (+) on your speaker

and the wire from the black terminal (-) of your amplifier or receiver to

the black terminal (-) on your speaker. Most wire has some indicator

(such as color-coding, ribbing or writing) on one of the two conductors

to help you maintain consistency [Figure 6].

Figure 4

Figure 5

Template

Specyfikacje produktu

Marka:	Definitive Technology
Kategoria:	głośnik
Model:	Disappearing DI 5.5LCR

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Definitive Technology Disappearing DI 5.5LCR, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik Definitive Technology

Definitive Technology Dymension DW-45 MAX Instrukcja

8 Października 2024

Definitive Technology Dymension DW-65 MAX Instrukcja

8 Października 2024

Definitive Technology Dymension DW-65 PRO Instrukcja

8 Października 2024

Definitive Technology Dymension DC-80 MAX SUR Instrukcja

8 Października 2024

Definitive Technology Mythos LCR-75 Instrukcja

7 Października 2024

Definitive Technology Mythos LCR-85 Instrukcja

7 Października 2024

Definitive Technology Mythos LCR-65 Instrukcja

5 Października 2024

Definitive Technology Mythos ST Instrukcja

3 Października 2024

Definitive Technology ProCinema 1000 Instrukcja

22 Września 2024

Definitive Technology BPVX Instrukcja

21 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel Rockster Air Instrukcja

15 Października 2024

Alpine PSS-22WRA Instrukcja

15 Października 2024

Bauhn APPS-0724 Instrukcja

15 Października 2024

Aiwa SP-A100 Instrukcja

15 Października 2024

Harman Kardon Citation One Instrukcja

14 Października 2024

Alpine 30MC Instrukcja

14 Października 2024

Magnat Needle 9000 ALU Instrukcja

14 Października 2024

Pioneer SP-T22A-LR Instrukcja

14 Października 2024

Sharp PS-932 Instrukcja

14 Października 2024

Pyle PDWR64BTW Instrukcja

13 Października 2024