Instrukcja obsługi Definitive Technology BP9080x

Definitive Technology głośnik BP9080x

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Definitive Technology BP9080x (128 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/128
Owner’s Manual
BP9080x, BP9060, BP9040, BP9020
2
DEFINITIVE TECHNOLOGY
WHAT OBSESSION SOUNDS LIKE™
Thank you for choosing the Definitive Technology BP9000 loudspeaker system.
The BP9000 range offers the most cutting-edge audio technologies, including
Forward-Focused Bipolar array technology, integrated powered subwoofers,
Intelligent Bass Control™ and Dolby Atmos® and DTS: X™ compatibility. This
extraordinary speaker is truly state-of-the-art in both music and home theater
sound reproduction. We expect you will enjoy the full-range sonic signature of
Definitive Technology.
Our engineers have spent many years developing this product. In order to ensure
that you experience the finest performance possible, we encourage you to take a
moment to fully read this owner’s manual and familiarize yourself with the proper
installation and set-up procedures for your BP9000 speakers.
4
SAFETY PRECAUTIONS
CAUTION! To reduce the risk of electric shock and fire, do not remove
the cover or back plate of this device. There are no user serviceable
parts inside. Please refer all servicing to licensed service technicians.
Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside of
a triangle is intended to alert the user to uninsulated “dangerous
voltage” within the device’s enclosure. The international symbol of
an exclamation point inside of a triangle is intended to alert the user
to the presence of important operating, maintenance and servicing
information in the manual accompanying the device.
CAUTION! To prevent electrical shock, match wide blade of
plug to wide slot, fully insert. Attention: Pour eviter les chocs
electriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this
equipment to rain or moisture.
1. —All safety and operating instructions should READ INSTRUCTIONS
be read before operating the device.
2. RETAIN INSTRUCTIONS—The safety and operating instructions
should be retained for future reference.
3. —All warnings on the device and in the operating HEED WARNINGS
instructions should be adhered to.
4. —All operating and safety instructions FOLLOW INSTRUCTIONS
should be followed.
5. WATER & MOISTURE—The device should never be used in, on or
near water for risk of fatal shock.
6. VENTILATION—The device should always be located in such a way
that it maintains proper ventilation. It should never be placed in
a built-in installation or anywhere that may impede the flow of air
through its heat sink.
7. HEAT—Never locate the device near heat sources such as radiators,
floor registers, stoves or other heat-generating devices.
8. POWER SUPPLY—The device should only be connected to a power
supply of the type described in the operating instructions or as
marked on the device.
9. —Power cables should be routed so POWER CORD PROTECTION
they are not likely to be stepped on or crushed by items placed on
them or against them. Special attention should be paid to areas
where the plug enters a socket or fused strip and where the cord
exits the device.
10. —The device should be cleaned in accordance CLEANING
with manufacturer’s instructions. We recommend using a lint roller
or household duster for the grille cloth.
11. —The device should be unplugged PERIODS OF NON-USE
when not being used for extended periods of time.
12. —Care should be taken that no foreign DANGEROUS ENTRY
objects or liquids fall or are spilled inside the device.
13. —The device should be DAMAGE REQUIRING SERVICE
serviced by licensed technicians when:
• The plug or power supply cord has been damaged.
• Objects have fallen on or liquid has spilled inside the device.
• The device has been exposed to moisture.
• The device does not appear to be operating properly or exhibits
a marked change in performance.
• The device has been dropped or the cabinet becomes damaged.
14. —The device should always be serviced by licensed SERVICE
technicians. Only replacement parts specified by the manufacturer
should be used. The use of unauthorized substitutions may result in
fire, shock, or other hazards.
CAUTION: IMPORTANT SAFETY INSTRUCTIONS
WARNING: DO NOT OPERATE SPEAKER WITHOUT STABILIZER
BASE INSTALLED
Power Supply
1. The fuse and power disconnect device are located on the back of
the speaker.
2. The disconnect device is the power cord, detachable at either the
speaker or the wall.
3. The power cord must be disconnected from the speaker before
servicing.
This symbol on our electrical products or their packaging indicates that
it is forbidden in Europe to discard the product in question as domestic
waste. In order to ensure that you dispose of the products correctly,
please dispose of the products according to local laws and regulations
on the disposal of electrical and electronic equipment. In doing so
you are contributing to the retention of natural resources and to the
promotion of environmental protection by the treatment and disposal
of electronic waste.
5
We're delighted that you're part of our
Definitive Technology family.
Please take a few minutes to register your product* so we have a
complete record of your purchase. Doing so helps us serve you the
best we can now and in the future. It also lets us contact you for any service or
warranty alerts (if required).
Register here: http://www.definitivetechnology.com/registration
No internet? Call Customer Service
M-F 9:30 a.m. - 6 p.m. US ET
at (800) 228-7148 (US & Canada), 01 (410) 363-7148 (all other countries)
Note: the data we gather during online registration is never sold or distributed to third parties.
*Serial number can be found at the back of the manual
6
Unpacking Your BP9000 Speakers
Please unpack your system carefully. We recommend saving all cartons and packing materials in case you move or
need to ship your system. It is important to save this booklet, as it contains the serial number for your product. You
can also find the serial number on the back of your BP9000 speaker. Each loudspeaker leaves our factory in perfect
condition. Any visible or concealed damage most likely occurred in handling after it left our factory. If you discover
any shipping damage, please report this to your Definitive Technology dealer or the company that delivered your
loudspeakers.
Accessories Included in Your
BP9000 Accessory Kit:
1. Aluminum stabilizer base: Qty (1) all models
2. Phillips head screws: Qty (4) all models
3. Screw locks for spikes/glides: Qty (4)
4. Hard floor glides (for solid floor surfaces
like hardwood or cement): Qty (4) all models
5. Carpet spikes (for carpet floors):
Qty (4) all models
6. Power cord: Qty (1) all US models;
Qty (2) all EU and UK models
*Definitive Technology is not responsible for damage to floors caused by misuse of the provided accessories.
3 54
1 2
FIGURE 1 | Base Installation
7
Positioning the Speakers in Your Room
Your BP9000 speakers are very flexible in terms of positioning and placement. To optimize their performance,
please follow these simple guidelines. Although the following recommendations will usually yield the best results,
all rooms and listening setups are different, so do not be afraid to experiment with the speaker placement.
Whatever sounds best to you is likely correct.
We recommend setting up the speakers and
listening position in an equilateral triangle as
illustrated in . You will also get good results Figure 2
if the listeners are a bit farther away. For example,
if line and are each 10' long then line could A C B
be between 7' and 10' wide. The BP9000 speakers
offer bipolar sound, meaning they will reflect sound
off the back and side walls to create an incredibly
broad and engaging soundstage no matter where
you sit. As such, we recommend placing your
BP9000 speakers at least 4” away from your back
wall to maximize this feature. Toeing the speakers
in slightly, if possible, toward your viewing area
will also provide a stronger center image. Once
you’ve found the right location, feel free to contact
Definitive Technology or your place of purchase for
additional guidance on speaker positioning.
≥
6"
(30CM)
≥
4"
(10CM)
A
B
C
≥
6"
(30CM)
FIGURE 2 | Positioning BP9000 as Left/Right
8
Connecting Your Loudspeakers
FIGURE 3 – Wiring and Polarity
STRIP 1/4" (6MM) WIRE
(SPEAKER) (HEIGHT)
1. IDENTIFY MARKINGS ON WIRE AND ASSIGN +/–
2. APPLY BANANA PLUGS OR SPADES AT THIS POINT IF APPLICABLE
1. UNSCREW BOTTOM SET OF BINDING POST
AND CONNECT WIRE
2. TIGHTEN UNTIL SECURE
ENSURE THAT THE SPEAKER IS ALWAYS
CONNECTED TO THE RECEIVER OR AMPLIFIER +
TO + AND – TO –
9
Connection Options: Speaker-Level Only or
Speaker-Level + LFE w/ "Y" Connector
Use the manual speaker setup functions in your receiver or processor to set speaker configuration, speaker distance
and channel balance. Consult your receiver/processor manual to learn how to access and use the setup menus. We
recommend that you use the settings called for in Figure 4/5.
Note: We recommend that you do not use your receiver’s auto setup functions as they can be ineffective in setting
up and adjusting speakers with integrated powered subwoofers.
Connection Option 1: Speaker-Level Only (recommended)
Option 1 offers an
incredibly precise, full-
range sound. The internal
cross-over network
distributes all frequencies
to their intended drivers,
and the integrated
powered subwoofer works
harmoniously with the mid-
range array.
Directions:
• Connect speaker wire
from receiver/amplifier to
speaker level input on the
back of the speaker
• Adjust receiver/processor
settings to: Speaker
(Large); Subwoofer (No)
FIGURE 4 – Speaker Level Only Connection Diagram
Important: Setting subwoofer to no simply means NO additional subwoofer is needed.
10
Connection Option 2: Speaker-Level + LFE with “Y” Connector
FIGURE 5 – Speaker-Level + LFE with "Y" Connection Diagram
For those who demand greater customization, Option 2 gives you the ability to control the amount of low frequencies
(those below the crossover point set in your receiver/processor) sent to the subwoofer. Should you prefer Option 2,
we highly recommend setting the crossover point in your receiver/processor to 80Hz or below to avoid disturbing the
delicate blending between the subwoofer and midrange. In addition, careful balance between the subwoofer output
level of your receiver and the bass control on the back of your speaker should be considered. We recommend starting
with the bass control at 12 o’clock. (as shown in Figure 5).
Directions:
• Connect speaker wire from receiver/amplifier to speaker level input
• Connect RCA Y-Cable from LFE or Sub-out of receiver/processor to LFE input on both Left and
Right BP9000 speakers
• Adjust receiver or processor settings to: Speaker (Small); Subwoofer (Yes)
For additional advanced
connection methods,
please visit the Definitive
Technology website or
give us a call.
"Y" CABLE NOT INCLUDED
11
Powering the Active Subwoofer
Your BP9000 speakers contain built-in powered subwoofers that must be plugged into an electrical socket. The
BP9000 has a signal detection feature that only turns the amplifier on when a signal is present. The LED on the back
will turn from Red to Blue when a signal is sensed. The "D." LED logo on the front will also turn on if enabled (see
Definitive Technology "D." LED Logo section for more information). After the cessation of a signal, it may take up
to 20 minutes for the amplifier to standby. Do not be concerned, the amplifiers draw little power when they are idle.
Intelligent Bass Control
™
Definitive Technology has long believed that the best loudspeaker is one that reproduces the full-range audio
signal as precisely as possible. Our sonic signature allows you to not just hear what is on the screen, but to feel it
as well. Intelligent Bass Control ™ is our latest advancement that gives you the ability to modulate deep bass up
or down in level while simultaneously maintaining optimal mid-range clarity regardless of where the bass control is
set. Simply rotate the dial on the back of the loudspeaker to your preferred bass setting and the speaker will do the
rest of the work. That’s it. We recommend starting at the mid-point and adjust to your preference from there.
For advanced instructions on Intelligent Bass Control ™ including integrating with room correction software (ex.
Audyssey), please visit our website or give us a call.
Dolby Atmos® and DTS:X® Compatibility
All BP9000 floor speakers offer Dolby Atmos or DTS:X compatibility. The BP9080x
integrates a height speaker module into the loudspeaker, whereas the BP9060, BP9040,
and BP9020 offer a hidden, dedicated connector port (fits A90 speaker module—
sold separately) that can be accessed by gently pushing down on the back of the
magnetically-sealed, acoustically-treated aluminum top panel. Regardless of your
setup, simply run additional speaker wire to the height channel binding posts on the
back of the loudspeaker from any Dolby Atmos or DTS:X compatible set-up.
A90 Placement diagram
13
9020 9040 9080 BP BP BP9060 BP x
SPECIFICATIONS
DIMENSIONS
(CABINET ONLY, NO BASE) 34.75" H x 6" W
x 13" D (88.3cm
H x 15.3 cm W x
33 cm D)
38.25" H x 6" W x
13" D (97.0 cm H
x 15.3 cm W x 33
cm D)
43.75" H x 6" W x
13" D (111.1cm H
x 15.3 cm W x 33
cm D)
50.5" H x 7" W x
16" D (128.7cm H
x 17.8 cm W x 40.6
cm D)
DIMENSIONS (WITH BASE) 35.5" H x 11" W
x 13" D (88.3cm
H x 27.9 cm W x
33 cm D)
39" H x 11" W
x 13" D (99.0cm
H x 27.9 cm W x
33 cm D)
44.5" H x 11" W
x 13" D (113.1cm
H x 15.3 cm W x
33 cm D)
51.5" H x 12" W
x 16" D (130.8cm
H x 30.5 cm W x
40.6 cm D)
PRODUCT WEIGHT 30 lbs. 36 lbs. 50 lbs. 62 lbs.
FRONT ARRAY DRIVER COMPLEMENT (2) 3.5" (8.9
cm) drivers,
(1) 1" (2.5 cm)
aluminum dome
tweeter
(2) 4.5" (11.4 cm)
drivers, (1) 1" (2.5
cm) aluminum
dome tweeter
(2) 4.5" (11.4 cm)
drivers, (1) 1" (2.5
cm) aluminum
dome tweeter
(2) 5.25" (13.3
cm) drivers, (1) 1"
(2.5 cm) aluminum
dome tweeter
REAR ARRAY DRIVER COMPLEMENT
(1) 3.5"
(8.9 cm) driver
(1) 4.5" (11.4 cm)
driver, (1) 1" (2.5
cm) aluminum
dome tweeter
(1) 4.5" (11.4 cm)
driver, (1) 1" (2.5
cm) aluminum
dome tweeter
(2) 5.25" (13.3
cm) drivers, (1) 1"
(2.5 cm) aluminum
dome tweeter
SUBWOOFER SYSTEM DRIVER COMPLEMENT
(1) 8" (20.3 cm)
woofer
(1) 8" (20.3 cm)
woofer, (2) 8" (20.3
cm) bass radiators
(1) 10" (25.4 cm)
woofer, (2) 10"
(25.4 cm) bass
radiators
(1) 12" (30.5 cm)
woofer, (2) 12"
(30.5 cm) bass
radiators
FREQUENCY RESPONSE 28Hz-40kHz 22Hz-40kHz 18Hz-40kHz 16Hz-40kHz
SENSITIVITY 92dBSPL 92dBSPL 92dBSPL 92dBSPL
IMPEDENCE 8 ohms 8 ohms 8 ohms 8 ohms
RECOMMENDED INPUT POWER 50-200W 50-300W 50-300W 50-300W
NOMINAL POWER ( ) 150W 300W 300W 455W1% THD, 5SEC.
EVELATION MODULE DRIVER COMPLEMENT
none none none
(1) 5.25" (13.3 cm)
drivers, (1)1"
(2.5 cm) aluminum
dome tweeters
14
Troubleshooting
If you experience any difficulties with your BP9000 speakers, try the suggestions below. If you still have problems, contact your Definitive
Technology Authorized Dealer for assistance.
1. Audible distortion when the speakers are playing at loud levels is caused by turning up your receiver or amplifier louder than the
receiver or the speakers are capable of playing. Most receivers and amplifiers put out their full-rated power well before the volume
control is turned all the way up, so the position of the volume control is a poor indicator of its power limit. If your speakers distort
when you play them loud, turn the volume down!
2. If you experience a lack of bass, it is likely that one speaker is out of phase (polarity) with the other and needs to be rewired with closer
attention to connecting positive to positive and negative to negative on both channels. Most speaker wire has some indicator (such
as color-coding, ribbing or writing) on one of the two conductors to help you maintain consistency. It is essential to connect both
speakers to the amplifier in the same way (in phase). You may also experience lack of bass if the bass volume knob is turned down or
not on.
3. Make sure all your system interconnects and power cords are solidly in place.
4. Should you hear hum or noise coming from your speakers, try plugging the speakers’ power cords into a different AC circuit.
5. The system has sophisticated internal protection circuitry. If for some reason the protection circuitry trips, turn off your system and
wait five minutes before trying the system again. If the speakers’ built-in amplifier should overheat, the system will turn off until the
amplifier cools down and resets.
6. Check to be sure that your power cord has not been damaged.
7. Check that no foreign objects or liquid has entered the speaker cabinet.
8. If you cannot get the subwoofer driver to turn on or if no sound comes out and you are sure the system is set up properly, please bring
the loudspeaker to your Definitive Technology Authorized Dealer for assistance; call first
Service
Service and warranty work on your Definitive loudspeakers will normally be performed by your local Definitive Technology
dealer. If, however, you wish to return the speaker to us, please contact us first, describing the problem and requesting
authorization as well as the location of the nearest factory service center. Please note that the address given in this booklet
is the address of our offices only. Under no circumstances should loudspeakers be shipped to our offices or returned without
contacting us first and obtaining return authorization.
Definitive Technology Offices
1 Viper Way, Vista, CA 92081
Phone: (800) 228-7148 (US & Canada), 01 (410) 363-7148 (all other countries)
15
Limited Warranty:
5-Years for Drivers and Cabinets, 3-Years for Electronic Components
DEI Sales Co., dba Definitive Technology (herein “Definitive”) warrants to the original retail purchaser only that this Definitive
loudspeaker product (the “Product”) will be free from defects in material and workmanship for a period of five (5) years covering
the drivers and cabinets, and three (3) years for the electronic components from the date of the original purchase from a Definitive
Authorized Dealer. If the Product is defective in material or workmanship, Definitive or its Authorized Dealer will, at its option, repair or
replace the warranted product at no additional charge, except as set forth below. All replaced parts and Product(s) become the property
of Definitive. Product that is repaired or replaced under this warranty will be returned to you, within a reasonable time, freight collect.
This warranty is non-transferrable and is automatically void if the original purchaser sells or otherwise transfers the Product to any
other party.
This Warranty does not include service or parts to repair damage caused by accident, misuse, abuse, negligence, inadequate packing or
shipping procedures, commercial use, voltage in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly
attributable to defects in material or workmanship. This warranty does not cover the elimination of externally generated static or noise,
or the correction of antenna problems or weak reception. This warranty does not cover labor costs or damage to the Product caused by
installation or removal of the Product. Definitive Technology makes no warranty with respect to its products purchased from dealers or
outlets other than Definitive Technology Authorized Dealer.
THE WARRANTY IS AUTOMATICALLY VOID IF:
1) The product has been damaged, altered in any way, mishandled during transportation, or tampered with.
2) The product is damaged due to accident, fire, flood, unreasonable use, misuse, abuse, customer applied cleaners, failure to observe
manufacturers warnings, neglect or related events.
3) Repair or modification of the Product has not been made or authorized by Definitive Technology.
4) The product has been improperly installed or used.
Product must be returned (insured and prepaid), together with the original dated proof of purchase to the Authorized Dealer from
whom the Product was purchased, or to the nearest Definitive factory service center. Product must be shipped in the original shipping
container or its equivalent. Definitive is not responsible or liable for loss or damage to Product in transit.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY THAT APPLIES TO YOUR PRODUCT. DEFINITIVE NEITHER ASSUMES NOR AUTHORIZES ANY
PERSON OR ENTITY TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH YOUR PRODUCT OR THIS WARRANTY. ALL OTHER
WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS, IMPLIED,WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSLY EXCLUDED AND DISCLAIMED TO THE MAXIMUM EXTENT ALLOWED BY LAW. ALL IMPLIED WARRANTIES ON PRODUCT ARE LIMITED TO
THE DURATION OF THIS EXPRESSED WARRANTY. DEFINITIVE HAS NO LIABILITY FOR ACTS OF THIRD PARTIES. DEFINITIVE’S LIABILITY, WHETHER BASED
ON CONTRACT, TORT, STRICT LIABILITY, OR ANY OTHER THEORY, SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT FOR WHICH A CLAIM
HAS BEEN MADE. UNDER NO CIRCUMSTANCE WILL DEFINITIVE BEAR ANY LIABILITY FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. THE
CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DEFINITIVE SHALL BE RESOLVED IN ACCORDANCE WITH
CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA. DEFINITIVE RESERVES THE RIGHT TO MODIFY THIS WARRANTY STATEMENT AT ANY TIME.
Some states do not allow the exclusion or limitation of consequential or incidental damages, or implied warranties, so the above
limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
©2016 DEI Sales Co. All rights reserved.
16
AVERTISSEMENTS DE SÉCURITÉ
CAUTION! AVERTISSEMENT! Pour réduire le risque de choc
électrique et de feu, n'enlevez pas le courvercle ou la plaque arrière de
cet appareil. Il n'y a pas de pièce utilisable par l'utilisateur à l'intéreur.
Veuillez consulter un technicien accrédité pour toute réparation. Avis:
Risque de choc électricque, ne pas ouvrir.
AVERTISSEMENT! Le symbole international d'un éclair à l'intérieur
d'un triangle est conçu pour alerter l'utilisateur d'une tension
dangereuse non isolée à l'intérieur du caisson de l'appareil. Le symbole
international d'un point d' exclamation à l'intérieur d'un triangle
est conçu pour aviser l'utilisateur de la présence d'une information
importante d'opération, de maintenance et de réparation dans le
manuel qui accompagne l'appareil.
AVERTISSEMENT! Pour éviter les risques de chocs électriques,
introduisez la lame la plus large de la fiche dans la fente la plus large
de la prise et poussez jusqu'au fond.
AVERTISSEMENT! Pour éviter les risques de chocs électriques,
n'exposez pas cet équipement à la pluie ou à l'humidité.
1. LISEZ LES INSTRUCTIONS — Toutes les instructions de sécurité et
d'opération doivent être lues avant d'utiliser l'appareil.
2. CONSERVEZ LES INSTRUCTIONS — Les instructions de sécurité et
d'opération doivent être conservées pour référence ultérieure.
3. TENEZ COMPTE DES AVERTISSEMENTS — Tous les avertissements
sur cet appareil et dans les instructions d'opération doivent être
suivis.
4. SUIVEZ LES INSTRUCTIONS — Toutes les instructions d'opération et
de sécurité doivent être suivies.
5. EAU ET HUMIDITÉ —TL'appareil ne doit jamais être utilisé dans ou
près de l'eau car il y a risque de choc fatal.
6. AÉRATION — L'appareil doit toujours être placé de manière à être
bien aéré. Il ne doit jamais être placé dans une installation intégrée
ou dans tout endroit qui peut entraver le flux d'air à travers son puits
thermique.
7. CHALEUR — Ne placez jamais l'appareil près de toute source de
chaleur telle des appareils de chauffage, des grilles de soufflage,
des poêles ou tout autre appareil produisant de la chaleur.
8. ALIMENTATION — L'appareil doit être connecté uniquement à une
alimentation du type décrit dans les instructions d'opération
ou tel qu'indiqué sur l'appareil.
9. PROTECTION DU CORDON D'ALIMENTATION — Les cordons
d'alimentation doivent être acheminés de manière à ne pas être
piétinés ou écrasés par des objets placés sur eux ou contre eux.
Une attention spéciale doit être apportée aux endroits où la fiche
entre dans une prise ou une bande dénudée et où le cordon sort
de l'appareil.
10.NETTOYAGE — Nous recommandons l’utilisation d’un rouleau
adhésif ou d’un plumeau pour nettoyer le tissu protecteur.
11.PÉRIODES DE NON UTILISATION — L’appareil devrait être
débranché lorsqu’il n’est pas utilisé pour une longue durée.
12.ENTRÉE DANGEREUSE — Portez attention à ce qu'aucun objet ou
liquide ne tombe ou soit renversé à l'intérieur de l'appareil.
13.DOMMAGE NÉCESSITANT UNE RÉPARATION —L'appareil doit
être réparé par un technicien agréé lorsque :
• La fiche ou le cordon d'alimentation a été endommagé.
• Des objets sont tombés ou un liquide a été renversé à l'intérieur de
l'appareil.
• L'appareil a été exposé à l'humidité.
• L'appareil ne semble pas fonctionner correctement ou a un
changement de performance.
• L'appareil a été échappé ou le caisson est endommagé.
14.RÉPARATION — L'appareil doit toujours être réparé par un techicien
agréé. Uniquement les pièces spécifiées par le fabricant doivent être
utilisées. L'utilisation de pièces de substitutions non
AVERTISSEMENT : INSTRUCTIONS DE SÉCURITÉ
IMPORTANTES
AVERTISSEMENT : NE PAS UTILISER LE HAUT-PARLEUR SANS
INSTALLER UNE BASE STABILISATRICE
Bloc d'alimentation
1. Le coupe-circuit à fusible et le dispositif d'interruption d'alimentation
sont situés à l'arrière du haut-parleur.
2. Le dispositif de déconnexion est le cordon d'alimentation,
détachable soit au haut-parleur, soit au mur.
3. Le cordon d'alimentation doit être déconnecté du haut-parleur avant
les réparations.
Ce symbole sur nos produits électriques ou leur emballage indique
qu'il est interdit en Europe de jeter le produit en question avec
les déchets domestiques. Afin de vous assurer d'éliminer les
produits correctement, veuillez le faire conformément aux lois et
réglementations locales relatives à l'élimination de l'équipement
électrique et électronique. En ce faisant, vous contribuez à la
conservation des ressources naturelles et à la promotion de la
protection de l'environnement par le traitement et l'élimination des
déchets électroniques.
17
Nous sommes heureux que vous fassiez partie de
notre famille Definitive Technology.
Veuillez prendre quelques minutes pour enregistrer votreproduit* afin que nous
ayons un dossier compet de votre achat. Ainsi, nous pourrons mieux vous servir
dans le futur. Cela nous permet également de vous contacter pour toute
question de réparation ou de garantie (si nécesaire)
Enregistrez le produit à: http://www.definitivetechnology.com/registration
Vous n'avez pas Internet? Téphonez au service à la clientèle
Lundi au vendredi 9:h30 à 18 h É.-U. HE au 800-228-7148 (É.-U. et Canada), 01-410-363-
7148 (et tous les autres pays)
Note: tles données que nous recueillons lors de l'enregistrement en ligne ne sont jamais vendues ou partagées à
des tierces parties.
*Le numéro de série se retrouve à l'endos du manuel
FR

Specyfikacje produktu

Marka: Definitive Technology
Kategoria: głośnik
Model: BP9080x

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Definitive Technology BP9080x, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Definitive Technology

Definitive Technology

Definitive Technology Dymension LS-400 Instrukcja

8 Stycznia 2025
Definitive Technology

Definitive Technology Dymension Outdoor LS- Instrukcja

8 Stycznia 2025
Definitive Technology

Definitive Technology Dymension LS-80 Instrukcja

8 Stycznia 2025
Definitive Technology

Definitive Technology Dymension Outdoor AW-550 Instrukcja

1 Stycznia 2025
Definitive Technology

Definitive Technology UIW 64/A Instrukcja

29 Grudnia 2024
Definitive Technology

Definitive Technology Dymension Outdoor BL-550 Instrukcja

7 Grudnia 2024
Definitive Technology

Definitive Technology Dymension Outdoor BL-650 Instrukcja

7 Grudnia 2024
Definitive Technology

Definitive Technology Dymension DW-45 MAX Instrukcja

8 Października 2024
Definitive Technology

Definitive Technology Dymension DW-65 MAX Instrukcja

8 Października 2024
Definitive Technology

Definitive Technology Dymension DW-65 PRO Instrukcja

8 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Induction Dynamics

Induction Dynamics C2 Instrukcja

25 Marca 2025
Streetz

Streetz CM717 Instrukcja

20 Marca 2025
Streetz

Streetz CM715 Instrukcja

20 Marca 2025
Streetz

Streetz CM716 Instrukcja

20 Marca 2025
SOUNDBOKS

SOUNDBOKS The Battery Instrukcja

20 Marca 2025
ETON

ETON HEX 165 Instrukcja

19 Marca 2025
ETON

ETON PRW 50 Instrukcja

19 Marca 2025
ETON

ETON PFX 10 Instrukcja

19 Marca 2025
ETON

ETON PRA 80 Instrukcja

19 Marca 2025
ETON

ETON PFX 16 Instrukcja

19 Marca 2025