Instrukcja obsługi Definitive Technology BP9000


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Definitive Technology BP9000 (13 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/13
OWNER’S MANUAL
BP9000 Bipolar Surround Speakers:
SR9080BP, SR9040BP
Thank you for choosing the Definitive Technology BP9000 Bipolar Surround Speakers. These compact,
high-quality bipolar speakers are intended primarily for use as a rear or side speakers. In addition, they can
also be used as front “effects” speakers in multichannel DSP systems. The lifelike soundfield and flexible
placement make this speaker an excellent addition to any room.
Our engineers have spent many years in developing this product. In order to ensure that you experience
the finest performance possible, we encourage you to take a moment to fully read this owners manual and
familiarize yourself with the proper installation and setup procedures for your SR surround speakers.
owner’s manual
2
www.definitivetechnology.com
SR9080BP | SR9040BP
RECEIVER/
AM PLIFIER
1
2
For use as rear surround
speakers, position the speakers
approximately 6’ (2 m) high and
6’ (2 m) apart directly behind
the listening area.
For use as side surround
speakers, position the speakers
approximately 6’ (2 m) high
and directly beside or 1-2’
(30-60 cm) behind the
listening area.
Positioning Your BP9000
Surround Speakers
FIGURE 1 – REAR AND SIDE SURROUND PLACEMENT
VERY IMPORTANT:
Do not use your receiver’s auto setup function!!!
The bipolar nature of this speaker will often confuse
the receiver’s auto setup.
Dolby Digital and DTS multi-channel systems have critical channel
balance and speaker setup procedures which must be followed
if the system is to perform properly. Consult your receiver’s or
processor’s manual to learn how to access your system setup menus.
Set speaker setup to “small” and crossover to 80Hz for the
SR9080BP and 100Hz for the SR9040BP.
Troubleshooting
If you experience any difficulties with your BP Series loudspeakers,
try the suggestions below. If you still have problems, contact your
Definitive Technology Authorized Dealer for assistance.
1. Audible distortion when the speakers are playing at loud levels
is caused by driving (turning up) your receiver or amplifier louder
than it or the speakers are capable of playing. Most receivers and
amplifiers put out their full-rated power well before the volume
control is turned all the way up, so the position of the volume
control is a poor indicator of its power limit. If your speakers
distort when you play them loud, turn the volume down!
2. If you experience a lack of bass, it is likely that one speaker is out
of phase with the other and needs to be rewired paying closer
attention to connect positive to positive and negative to negative
on both channels. Most speaker wire has some indicator (such as
color-coding, ribbing or writing) on one of the two conductors
to help you maintain consistency. It is essential to connect both
speakers to the amplifier in the same way (in phase).
3. Make sure all your system interconnects are solidly in place.
4. Check that no foreign objects or liquid has entered the
speaker cabinet.
Connecting Your Loudspeakers
FIGURE 2 – WIRING AND POLARITY
+
-
Strip 1/4” (6mm) wire. Identify markings on wire and
assign +/-.
1. Unscrew binding post and
insert wire.
2. Tighten until wire is secure.
Ensure that the speaker is
always connected to the
receiver or amplifier + to +
and – to –.
FIGURE 3 – CONNECTING SPEAKER TO AMPLIFIER
Speaker Setup
Small,
SR9080BP Crossover at 80Hz
SR9040BP Crossover at 100Hz
Receiver/Amplifier
Speaker Outputs
L R CS RS LS
owner’s manual
3
www.definitivetechnology.com
SR9080BP | SR9040BP
Service
Service and warranty work on your Definitive product will normally
be performed by the Definitive Technology retailer or importer. If,
however, you wish to return the product to us, please contact us first,
describing the problem and requesting proper authorization. Please
note: Definitive phone and email technical support is offered only in
English.
Product Servicing
The address given in this booklet is the address of our offices. Under
no circumstances should loudspeakers be shipped to our offices or
returned without contacting us first and obtaining return authorization.
e-mail: info@DefinitiveTech.com
Technical Assistance
Contact Us Directly
Please contact the Definitive Technology Customer Service and
Technical Support Group at 1-800-223-5246. To best assist you we are
available 7 days a week, Monday – Friday from 9am to 9pm and on
Saturdays and Sundays from 10am to 6pm email: info@DefinitiveTech.
com
Warranty
Limited Warranty: 5 Years for Drivers and Cabinets, 3 Years
for Electronic Components
DEI Sales Co., dba Definitive Technology (herein “Definitive”) warrants to
the original retail purchaser only that this Definitive loudspeaker product (the
“Product”) will be free from defects in material and workmanship for a period
of five (5) years covering the drivers and cabinets, and three (3) years for the
electronic components from the date of the original purchase from a Definitive
Authorized Dealer. If the Product is defective in material or workmanship,
Definitive or its Authorized Dealer will, at its option, repair or replace the
warranted product at no additional charge, except as set forth below. All
replaced parts and Product(s) become the property of Definitive. Product
that is repaired or replaced under this warranty will be returned to you, within
a reasonable time, freight collect. This warranty is non-transferrable and is
automatically void if the original purchaser sells or otherwise transfers the
Product to any other party. This Warranty does not include service or parts to
repair damage caused by accident, misuse, abuse, negligence, inadequate
packing or shipping procedures, commercial use, voltage in excess of the rated
maximum of the unit, cosmetic appearance of cabinetry not directly attributable
to defects in material or workmanship. This warranty does not cover the
elimination of externally generated static or noise, or the correction of antenna
problems or weak reception. This warranty does not cover labor costs or damage
to the Product caused by installation or removal of the Product. Definitive
Technology makes no warranty with respect to its products purchased from
dealers or outlets other than Definitive Technology Authorized Dealer.
THE WARRANTY IS AUTOMATICALLY VOID IF:
1) The product has been damaged, altered in any way, mishandled during transportation, or
tampered with.
2) The product is damaged due to accident, fire, flood, unreasonable use, misuse, abuse,
customer applied cleaners, failure to observe manufacturers warnings, neglect or related
events.
3) Repair or modification of the Product has not been made or authorized by
Definitive Technology.
4) The product has been improperly installed or used. Product must be returned (insured
and prepaid), together with the original dated proof of purchase to the Authorized Dealer
from whom the Product was purchased, or to the nearest Definitive factory service center.
Product must be shipped in the original shipping container or its equivalent. Definitive is
not responsible or liable for loss or damage to Product in transit.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY THAT APPLIES TO YOUR
PRODUCT. DEFINITIVE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY
TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH
YOUR PRODUCT OR THIS WARRANTY. ALL OTHER WARRANTIES, INCLUDING BUT NOT
LIMITEDTO EXPRESS, IMPLIED,WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE,ARE EXPRESSLY EXCLUDEDAND DISCLAIMED TO THE MAXIMUM
EXTENTALLOWED BY LAW. ALL IMPLIED WARRANTIES ON PRODUCT ARE LIMITED TO
THE DURATION OF THIS EXPRESSED WARRANTY. DEFINITIVE HAS NO LIABILITY FOR
ACTS OF THIRD PARTIES. DEFINITIVE’S LIABILITY, WHETHER BASED ON CONTRACT, TORT,
STRICT LIABILITY, ORANY OTHER THEORY, SHALL NOT EXCEEDTHE PURCHASE PRICE
OF THE PRODUCT FOR WHICH A CLAIM HAS BEEN MADE. UNDER NO CIRCUMSTANCE
WILL DEFINITIVE BEARANY LIABILITY FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES. THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN
THE CONSUMER AND DEFINITIVE SHALL BE RESOLVED INACCORDANCE WITH
CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA. DEFINITIVE RESERVES THE
RIGHT TO MODIFY THIS WARRANTY STATEMENT AT ANYTIME. Some states do not allow
the exclusion or limitation of consequential or incidental damages, or implied warranties, so
the above limitations may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. ©2009 DEI Sales Co. All rights
reserved.
SR9080BP SR9040BP
PERFORMANCE SPECIFICATIONS
OVERALL FREQUENCY RESPONSE 40 Hz – 30 kHz 50 Hz – 30 kHz
SENSITIVITY 92 dB 92 dB
NOMINAL IMPEDANCE 8 ohms 8 ohms
RECOMMENDED ASSOCIATED
AMPLIFIER POWER 20 – 200w 20 – 150w
DIMENSIONS
HEIGHT 15 5/8” (39.69 cm) 9 1/2” (24.12 cm)
WIDTH 9” (22.76 cm) 7 13/16” (19.8 cm)
DEPTH 6 1/16” (15.5 cm) 5 3/8” (13.5 cm)
SPEAKER COMPLEMENT
BASS/MIDRANGE DRIVER QUANTITY 2 2
BASS/MIDRANGE DIAMETER 4 1/2” (11.43 cm) 3 1/2” (8.89 cm)
TWEETER QUANTITY 2 2
TWEETER DIAMETER 1” (2.54 cm) 1” (2.54 cm)


Specyfikacje produktu

Marka: Definitive Technology
Kategoria: głośnik
Model: BP9000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Definitive Technology BP9000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Definitive Technology

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024