Instrukcja obsługi Definitive Technology BP7000sc

Definitive Technology głośnik BP7000sc

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Definitive Technology BP7000sc (15 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/15

Congratulations

Congratulations on your purchase of the Deﬁnitive

Technology BP7000SC SC/BP7001 Bipolar Loudspeaker

System. The BP7000SC SC/BP7001 are very unique

speakers which combine our award-winning patented bipolar

technology with a built-in side-ﬁring SuperCube Technology

subwoofer system complete with ultra-high power digital

ampliﬁers. These extraordinary speakers truly revolutionize

the state-of-the-art in music and home theater loudspeakers.

Our engineers have spent many years in developing this

product. In order to ensure that you experience the ﬁnest

performance possible, we encourage you to take a moment

to fully read this owner’s manual and familiarize yourself

with the proper installation and set-up procedures for your

BP7000SC SC/BP7001 speakers.

BP7000 /BP7001SC SC

Bipolar Loudspeaker with Built-In Powered SuperCube

®Technology

Subwoofers

Owner’s Manual

CAUTION! To reduce the risk of electric shock and ﬁre, do not remove the cover or back plate of

this device. There are no user serviceable parts inside. Please refer all servicing to licensed service

technicians. Avis: Risque de choc electricque, ne pas ouvrir.

CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the

user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol

of an exclamation point inside a triangle is intended to alert the user to the presence of important

operating, maintenance and servicing information in the manual accompanying the device.

CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.

Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la ﬁche dans la

borne correspondante de la prise et pousser jusqu'au fond.

CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain

or moisture.

1. Read Instructions—All safety and operating instructions should be read before operating the device.

2. Retain Instructions—The safety and operating instructions should be retained for future reference.

3. Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.

4. Follow Instructions—All operating and safety instructions should be followed.

5. Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.

6. Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.

7. Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended by the

manufacturer.

8. Ventilation—The device should always be located in such a way that it maintains proper ventilation. It should

never be placed in a built-in installation or anywhere that may impede the ﬂow of air through its heat sink.

9. Heat—Never locate the device near heat sources such as radiators, ﬂoor registers, stoves or other heat-

generating devices.

10. Power Supply—The device should only be connected to a power supply of the type described in the operating

instructions or as marked on the device.

11. Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or crushed by

items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or

fused strip and where the cord exits the device.

12. Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.

13. Periods Of Non-Use—The device should be unplugged when not being used for extended periods.

14. Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside the device.

15. Damage Requiring Service—The device should be serviced by licensed technicians when:

• The plug or power supply cord has been damaged.

• Objects have fallen or liquid has spilled inside the device.

• The device has been exposed to moisture.

• The device does not appear to be operating properly or exhibits a marked change in performance.

• The device has been dropped or the cabinet becomes damaged.

16. Service—The device should always be serviced by licensed technicians. Only replacement parts speciﬁed

by the manufacturer should be used. The use of unauthorized substitutions may result in ﬁre, shock, or

other hazards.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

To reduce the risk of the product inadvertently tipping over, four stabilizer brackets with mounting screws

have been supplied. These must be installed in the base of the product in the slots provided.

Installation Instructions:

Tools required: Philips screw driver (not supplied)

Parts required: Four stabilizer brackets (supplied), eight screws (supplied)

Instructions:

1. Carefully lay the speaker on its front surface.

2. Place one of the stabilizer brackets in the rear slot provided. (Note: Stabilizer bracket will be ﬂush with bottom

of base.)

Safety Precautions

CAUTION Important Safety Instructions

It is important, because of the BP7000sc/BP7001sc’s unique bipolar

(front and rear) radiation pattern, that some simple set-up recommendations be

followed in order to assure optimum performance in your room. Please remember

that although these recommendations are usually valid, all rooms and listening

set-ups are somewhat unique, so do not be afraid to experiment with the speakers.

Remember, whatever sounds best to you is correct.

In most rooms the speakers should be placed 5 to 36 inches from the rear wall

in order to allow the rear radiated sound to freely reﬂect off the back wall. Please

note that they can go closer to, or further from, the wall if desired. Placement

closer to the rear wall will increase the bass output while placement further from

the rear wall will decrease the bass output (which, of course, can be compensated

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or

concealed damage most likely occurred in handling after it left our plant and

should be reported at once to your Deﬁnitive dealer or the delivery company that

delivered your loudspeaker. Please unpack your system carefully. Save all cartons

and packing materials in case you move or need to ship your system. Record the

serial number found on the back of the BP7000SC SC/BP7001 in the appropriate

place on your warranty card, answer all questions and send it in.

3. Insert two screws provided and tighten them securely, being careful not to strip out material.

4. Repeat steps #2 and #3 for the other stabilizer brackets.

5. Remove the supporting feet closest to the stabilizer brackets and thread them into the brass insert in

the stabilizer brackets.

6. Carefully return the speaker to the upright position and adjust the glides (supporting feet) to level the speaker.

Note: If desired, the four glides (support feet) may be replaced and the four spikes provided may be installed.

The four spikes or glides must be fully threaded into the brass inserts on the stabilizer brackets.

AVERTISSEMENT Mesures de Sécurité Importantes

Pour réduire les risques que le produit se renverse par inadvertance, quatre supports stabiliseurs avec vis de montage

ont été fournis. Ceux-ci doivent être installés sur la base du produit, dans les rainures appropriées.

Procédures d’installation:

Outils requis: Tournevis étoile (non fourni)

Pièces requises: Quatre supports stabiliseurs (fournis), huit vis (fournies)

Instructions:

1. Coucher soigneusement le haut-parleur sur la face avant.

2. Placer un des supports stabiliseurs dans la rainure appropriée arrière. (Note: le support stabiliseur sera égal

au bas de la base)

3. Insérer deux des vis prévues à cet effet et serrer de façon ajustée en prenant garde de ne pas élimer les parois

du matériel.

4. Répéter les étapes #2 et #3 pour l’autre support stabiliseur.

5. Retirer les niveleurs (pieds de support) les plus rapprochés des supports stabiliseurs et visser les niveleurs, dans

l’encolure de cuivre des supports stabiliseurs.

6. Relever soigneusement le haut-parleur dans sa position fonctionnelle et ajuster les niveleurs (pieds de support) pour

égaliser le haut-parleur.

Note: Les quatres niveleurs (pieds de support) peuvent être remplacés, si désiré, par les quatres pointes fournies

à cet effet.

Unpacking Your BP7000 /BP7001SC SCs

Positioning the Speakers in Your Room

Specyfikacje produktu

Marka:	Definitive Technology
Kategoria:	głośnik
Model:	BP7000sc

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Definitive Technology BP7000sc, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik Definitive Technology

Definitive Technology Dymension DW-45 MAX Instrukcja

8 Października 2024

Definitive Technology Dymension DW-65 MAX Instrukcja

8 Października 2024

Definitive Technology Dymension DW-65 PRO Instrukcja

8 Października 2024

Definitive Technology Dymension DC-80 MAX SUR Instrukcja

8 Października 2024

Definitive Technology Mythos LCR-75 Instrukcja

7 Października 2024

Definitive Technology Mythos LCR-85 Instrukcja

7 Października 2024

Definitive Technology Mythos LCR-65 Instrukcja

5 Października 2024

Definitive Technology Mythos ST Instrukcja

3 Października 2024

Definitive Technology ProCinema 1000 Instrukcja

22 Września 2024

Definitive Technology BPVX Instrukcja

21 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel Rockster Air Instrukcja

15 Października 2024

Alpine PSS-22WRA Instrukcja

15 Października 2024

Bauhn APPS-0724 Instrukcja

15 Października 2024

Aiwa SP-A100 Instrukcja

15 Października 2024

Harman Kardon Citation One Instrukcja

14 Października 2024

Alpine 30MC Instrukcja

14 Października 2024

Magnat Needle 9000 ALU Instrukcja

14 Października 2024

Pioneer SP-T22A-LR Instrukcja

14 Października 2024

Sharp PS-932 Instrukcja

14 Października 2024

Pyle PDWR64BTW Instrukcja

13 Października 2024