Instrukcja obsługi Danby DOM014401G1

Danby Magnetostrykcja DOM014401G1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Danby DOM014401G1 (67 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/67
DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
*
*
2022.08.03
MODEL • MODÈLE • MODELO
DOM014401G1
24” OVER THE RANGE SENSOR MICROWAVE
INSTALLATION MANUAL.....................................................................................1 - 22
MICRO-ONDES DE CUISSON À CAPTEUR DE 24” AU-DESSUS DE LA PLAGE
MANUEL D’INSTALLATION................................................................................23 - 44
MICROONDAS DE COCCIÓN CON SENSOR DE 24” SOBRE EL RANGO
MANUAL DE INSTALACIÓN...............................................................................45 - 66
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the
electrical current.
This appliance is equipped with a cord that has a
grounding wire with a grounding plug. The power
cord must be plugged into an outlet that is properly
grounded. If the outlet is a standard 2-prong wall
outlet, it is your responsibility to have it replaced
with a properly grounded 3-prong wall outlet.
The serial rating plate indicates the voltage and
frequency the appliance is designed for.
WARNING - Improper use of the grounding
plug can result in a risk of electric shock.
Consult a qualifi ed electrician or service agent
if the grounding instructions are not completely
understood, or if doubt exists as to whether the
appliance is properly grounded.
DO NOT USE AN EXTENSION CORD
Do not connect your appliance to extension cords
or together with another appliance in the same wall
outlet. Do not splice the power cord. Do not under
any circumstances cut or remove the third ground
prong from the power cord.
If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similar qualifi ed person in order to avoid hazard.
RADIO FREQUENCY INTERFERENCE
This equipment generates and uses ISM frequencies
and if not installed and used properly in strict
accordance with the manufacturer’s instructions,
it may cause interference to radio and television
reception. It has been type-tested and found to
comply with limits for ISM Equipment pursuant
to Part 18 of FCC Rules, which are designed
to provide reasonable protection against such
interference in a residential installation.
However, there is no guarantee that interference will
not occur in particular installations. If this equipment
does cause interference to radio or television
reception, which can be determined by turning
the equipment off and on, the interference can be
corrected by one or more of the following methods:
• Reorient the receiving antenna of radio or
television.
• Move the microwave oven away from the
receiver.
• Plug the microwave into a different outlet so that
microwave and receiver are on different branch
circuits.
The manufacturer is not responsible for any
radio or TV interference caused by unauthorized
modifi cation of this appliance. It is the responsibility
of the user to correct such interference.
AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY
• Do not attempt to operate the appliance with the
door open as this can result in harmful exposure
to microwave energy. Do not tamper with or
attempt to defeat the safety locks.
• Do not place any object between the front face
and the door or allow soil or cleaner residue to
accumulate on the sealing surfaces.
• Do not operate the appliance if it is damaged.
The door must close properly and there must be
no damage to the hinges, latches, door, door
seals or sealing surfaces.
SAVE THESE INSTRUCTIONS!
1
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
SAFETY INSTRUCTIONS
• Ensure that component parts are replaced with like components and that servicing is done by factory
authorized service personnel, to minimize the risk of possible ignition due to incorrect parts or improper
service.
• Check the appliance for damage before using. If there is any damage to the appliance, do not use it,
return it to its point of purchase or contact consumer care.
• The appliance must be placed on a fl at, stable surface that is able to hold its weight and the heaviest
food likely to be placed in the appliance.
• Do not use this appliance where heat, moisture or high humidity are generated.
• Do not clean this appliance with or use near combustible materials.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is specifi cally designed to heat, cook or dry food. It is not designed for industrial or
laboratory use.
• Do not store or use this appliance outdoors. Do not use this appliance near water.
• Do not overcook food. Carefully watch the appliance when it is in use.
• Remove wire twist-ties before placing items in the appliance.
• Do not use the appliance for storage purposes. Do not leave items inside the appliance when not in use.
• Do not heat oil or fat for deep frying as it is diffi cult to control the temperature of oil in a microwave.
• Some items such as whole eggs or sealed containers have the possibility of exploding when heated and
should not be placed in this appliance.
• Do not operate any heating or cooking appliance beneath this appliance.
• Ensure that the glass tray and rollers are in the correct position before use to avoid possible spills.
• Do not operate this appliance when it is empty as this will increase the heat around the magnetron and
can damage the appliance or cause a fi re.
• If items inside the appliance should ignite, keep the door closed, turn the appliance off and disconnect
the power cord.
• Do not operate the appliance without the glass tray, roller support and shaft in their correct positions.
2

Specyfikacje produktu

Marka: Danby
Kategoria: Magnetostrykcja
Model: DOM014401G1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Danby DOM014401G1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Magnetostrykcja Danby

Danby

Danby DBMW0721BBB Instrukcja

9 Października 2024
Danby

Danby DBMW0722BBS Instrukcja

8 Października 2024
Danby

Danby DMW1110BLDB Instrukcja

27 Września 2024
Danby

Danby DMW111KBLDB Instrukcja

27 Września 2024
Danby

Danby DMW11A4SDB Instrukcja

18 Września 2024
Danby

Danby DMW7700WDB Instrukcja

10 Września 2024
Danby

Danby DMW608BL Instrukcja

10 Września 2024
Danby

Danby DBMW0720ASD Instrukcja

9 Września 2024
Danby

Danby DBMW0720AWD Instrukcja

6 Września 2024
Danby

Danby DBMW0720ABD Instrukcja

6 Września 2024

Instrukcje Magnetostrykcja

Najnowsze instrukcje dla Magnetostrykcja

ACP

ACP JET19 Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool AMW 594 IX Instrukcja

15 Stycznia 2025
Medion

Medion MD 10482 Instrukcja

15 Stycznia 2025
Candy

Candy CMG 9523 DB Instrukcja

15 Stycznia 2025
Atag

Atag mc 111 f Instrukcja

15 Stycznia 2025
Samsung

Samsung MG11H2020CT Instrukcja

15 Stycznia 2025
Daewoo

Daewoo KOR 63 MDC Instrukcja

15 Stycznia 2025
Siemens

Siemens HF 85961 Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool AVM 687 IX RVS Instrukcja

15 Stycznia 2025
Daewoo

Daewoo KOR9GQR Instrukcja

15 Stycznia 2025